CD-RECEIVER KDC-W5641U KDC-W5541U KDC-W5141U KDC-W5041U KDC-W4141 KDC-W4041 INSTRUCTION MANUAL © B64-3958-00/00 (EW/E2W) B64-3958-00_English_E_r1.indd 1 07.11.
Contents Before use 3 Appendix Basic Operation 4 Accessories/ Installation Procedure 18 General functions Tuner functions Disc & Audio file play functions General Operation 6 Audio Control Audio Setup Speaker Setting Display Switching Tuner Operation 15 Connecting Wires to Terminals 19 Installation/Removing the Unit 21 Troubleshooting Guide 22 Specifications 24 8 PTY (Program Type) Program Type preset Changing Language for PTY Function Direct Access Tuning Music disc/Audio file Operati
Before use 2WARNING To prevent injury or fire, take the following precautions: • To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit. Before using this unit for the first time This unit is initially set on the Demonstration mode. When using this unit for the first time, cancel the (page 13). How to reset your unit • If this unit or the connected unit (disc auto changer, etc.
Basic Operation [TI] [ ] Release [M.JOG] Auxiliaryinput input Display Disc Discslot slot Auxiliary Control knob [SRC] [1] [2] [3] Control General functions Power/Source select button [SRC] Turns on the power. When the power is on, the source switches between Tuner (“TUNER”) , USB or iPod (“USB” or “iPod”), CD (“CD”) , Auxiliary input (“AUX”), and Standby (“STANDBY”) each time this button is pressed. Press at least 1 second to turn off the power.
: Indicates the button etc. to operate. Tuning Control knob Changes the frequency when pushing toward left or right. ⁄ • During reception of stereo stations the “ST” indicator is ON. Traffic information [TI] Turns ON or OFF the Traffic Information function. When the function is turned ON, “TI” indicator is ON. If traffic bulletin starts when the function is ON, “TRAFFIC INFO” is displayed and traffic information is received.
General Operation Audio Control Audio Setup You can adjust following Audio Control items; You can set Sound system , such as follows; Adjustment Item Rear volume* Subwoofer level Bass Boost** Display “R-VOLUME” “SUB-W L” “B.BOOST-L” Range 0 — 35 –15 — +15 “L1”/”L2”/“OFF” (The indicator turns on according to the setting.) System Q “NATURAL”/ Natural/User setting/Rock/ “USER”/“ROCK”/ Pops/Easy/Top 40/Jazz “POPS”/“EASY”/ (The indicator turns on “TOP40”/“JAZZ” according to the setting.
Speaker Setting Display Switching Fine-tuning so that the System Q value is optimal when setting the speaker type as follows; Changes displayed information on each source following; Speaker type OFF For 5 & 4 in. speaker For 6 & 6x9 in. speaker For the OEM speaker Display “SP SEL OFF” “SP SEL 5/4” “SP SEL 6*9/6” “SP SEL OEM” 1 Enter Standby Press the [SRC] button. Select the “STANDBY” display. 2 Enter Speaker Setting mode Press the Control knob.
Tuner Operation is displayed. Select another Program Type. PTY (Program Type) Selecting the Program Type below and searching for a station; No. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. 30. 31.
Music disc/Audio file Operation Function of remote control Direct Access Tuning Entering the frequency and tuning. 1 Enter Direct Access Tuning mode Press the [DIRECT] button on the remote control. "– – – –" is displayed. 2 Enter the frequency Press the number buttons on the remote control. Example: Desired frequency Press button 92.1 MHz (FM) [0], [9], [2], [1] 810 kHz (AM) [0], [8], [1], [0] Cancelling Direct Access Tuning Press the [DIRECT] button on the remote control.
Music disc/Audio file Operation Function of disc changers with remote control Direct Disc Search Searchs the disc by entering the disc number. 1 Enter the disc number Press the number buttons on the remote control. 2 Search the disc Press the [FM] or [AM] button. Cancelling Direct Disc Search Press the [38] button. ⁄ • Input “0” to select disc 10. • Direct Disc Search cannot be performed during playing of Random play or scan play.
Menu Operation Menu System Display Setting “RUSSIAN”*3 ON*/OFF Set up the following functions; Display “SECURITY SET” “CLOCK ADJUST” “SYNC” Setting Refer to page 12 Refer to page 12 ON*/OFF Setting overview Sets security code Source Sets the clock. Synchronizing the RDS station time data and this unit’s clock. “DISPLAY” ON*/OFF Turns off the display when no operation is performed. “DIMMER”*1 AUTO*/OFF Dims the display in conjunction with the light switch of the vehicle.
Menu Operation Security Code When Security Code is set, possibility of theft is reduced because input of Security Code is prompted to turn on the unit once it is turned off. ⁄ • When you activate the Security Code function, it cannot be released. Note, your Security Code is the 4 digit number entered in your “Car Audio Passport” in this package. and the input prohibition periods shown in the table below is generated.
Auxiliary Input Display Setting Selects the display below when changing to Auxiliary input source; • “AUX” • “DVD” • “PORTABLE” • “GAME” • “VIDEO” • “TV” 1 Select Auxiliary input display setting item during Menu mode Select the “NAME SET” display. For how to select menu items, refer to
Accessory of KDC-W5641U/KDC-W5141U/KDC-W4141 Basic Operations of remote control In Tuner source SRC VOL SRC ATT Band select [FM]/[AM] ATT VOL AUD AUD Station select [4]/[¢] Recall preset stations FM/AM DIRECT *2-ZONE 0—9 [1] — [6] In CD/USB source Music select [4]/[¢] Folder/Disc select [FM]/[AM] * Pause/Play *KDC-W5641U/W5141U only General control Volume control Source select ⁄ About [ ] This button is used when Bluetooth HANDS FREE BOX is connected.
Appendix About Audio file About USB device • Playable Audio file AAC-LC (.m4a), MP3 (.mp3), WMA (.wma) • Playable disc media CD-R/RW/ROM • Playable disc file format ISO 9660 Level 1/2, Joliet, Romeo, Long file name.
Appendix Menu Glossary • SWPRE (Switching Preout) Switches the preout between rear output (“REAR”) and subwoofer output (“SUB-W”). • SUPREME Technology to extrapolate and supplement with proprietary algorithm, the high-frequency range that is cut off when encoding at low bit rate (less than 128Kbps, Sampling frequency is 44.1kHz). Supplementing is optimized by compression format (AAC, MP3 or WMA) and processed according to bit rate.
For operating KCA-BT100 To control KCA-BT100, operate as follows; To make setting for , select
Accessories/ Installation Procedure Accessories • 1 • ..........1 • 2 • ..........2 • Installation Procedure 1. To prevent short circuits, remove the key from the ignition and disconnect the - terminal of the battery. 2. Make the proper input and output wire connections for each unit. 3. Connect the wire on the wiring harness. 4. Take Connector B on the wiring harness and connect it to the speaker connector in your vehicle. 5.
Connecting Wires to Terminals KDC-W5641U/W5541U/W5141U/W5041U Steering remote control (Light Blue/Yellow) REMO.CONT L To use the steering wheel remote control feature, you need to an exclusive remote adapter (not supplied) matches your car is required. When this terminal is not in use, leave its cap on.
Connecting Wires to Terminals Connector Function Guide Pin Numbers for ISO Connectors External Power Connector A-4 A-5 A-6 A-7 A-8 Cable Colour Functions Yellow Blue/White Orange/White Red Black Battery Power Control Dimmer* Ignition (ACC) Earth (Ground) Connection Speaker Connector B-1 B-2 B-3 B-4 B-5 B-6 B-7 B-8 Purple Purple/Black Gray Gray/Black White White/Black Green Green/Black Rear Right (+) Rear Right (–) Front Right (+) Front Right (–) Front Left (+) Front Left (–) Rear Left (+) Rear Left (
Installation/Removing the Unit Installation Metal mounting strap (commercially available) Firewall or metal support Removing the hard rubber frame 1 Engage the catch pins on the removal tool and remove the two locks on the upper level. Upper the frame and pull it forward as shown in the figure. Lock Catch Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place.
Troubleshooting Guide Some functions of this unit may be disabled by some settings made on this unit. ! • Cannot set up the subwoofer. • Cannot set up the High Pass Filter. • Cannot set up the Fader. • No Audio control effect on AUX. ▲ • Preout is not set to subwoofer. ☞ “SWPRE” of
The messages shown below display your systems condition. TOC ERROR: • No disc has been loaded in the disc magazine. • The CD is quite dirty. The CD is upsidedown. The CD is scratched a lot. E-05: The disc is unreadable. E-77: The unit is malfunctioning for some reason. ➪ Press the reset button on the unit. If the “E77” code does not disappear, consult your nearest service center. E-99: Something is wrong with the disc magazine. Or the unit is malfunctioning for some reason. ➪ Check the disc magazine.
Specifications FM tuner section Frequency range (50 kHz space) : 87.5 MHz – 108.0 MHz Usable sensitivity (S/N = 26dB) : 0.7 μV/75 Ω Quieting Sensitivity (S/N = 46dB) : 1.6 μV/75 Ω Frequency response (±3.0 dB) : 30 Hz – 15 kHz Signal to Noise ratio (MONO) : 65 dB Selectivity (DIN) (±400 kHz) : ≥ 80 dB Stereo separation (1 kHz) : 35 dB USB Interface (KDC-W5641U/W5541U/W5141U/W5041U) USB Standard : USB1.1/ 2.