Operation Manual

English

Deleting a Registered Bluetooth

device

You can delete a registered Bluetooth device.

1 Select Bluetooth device deletion mode

Select “MENU” > “Device Delete”.

For how to select Function Control item, refer to

<Function Control> (page 6).

2 Enter Bluetooth device deletion mode

Press the Control knob for at least 1 second.

“(name)” is displayed.

3 Select the Bluetooth device

Turn the Control knob.

4 Delete the selected Bluetooth device

Press the Control knob.

5 Turn the Control knob to select “YES”, and then

press the Control knob.

“Delete” is displayed.

6 Exit Bluetooth device deletion mode

Press the [FNC] button.

⁄

• When a registered cell-phone is deleted, its Phone Book,

log, SMS, and voice tag are also deleted.

Displaying the Firmware Version

Display the version of the firmware of this unit.

1 Enter Bluetooth Firmware update mode

Select “MENU”

> “BT F/W Update”.

For how to select Function Control item, refer to

<Function Control> (page 6).

2 Enter Bluetooth Firmware update mode

Press the Control knob for at least 1 second.

The firmware version appears.

3 Exit Bluetooth Firmware update mode

Press the [FNC] button.

⁄

• For how to update the firmware, access our web site.

http://www.kenwood.com/bt/information/

“ “ (blank): The Bluetooth device is deselected.

5 Exit Bluetooth device selection mode

Press the [FNC] button.

⁄

• If a cell-phone is already selected, deselect it, and then

select a different one.

• If you cannot select a device using the audio player,

connect the device with the audio player.