Operation Manual

P.CONT
ANT.CONT
MUTE
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
LR
LR
KDC-BT8044U/KDC-BT8044UY/KDC-W7544U/KDC-W7644UY
KDC-W7044U/KDC-W7144UY
REMO.CONT
Battery wire (Yellow)
Ignition wire (Red)
FM/AM antenna input (JASO)
Antenna Cord
Wiring harness
(Accessory1)
If no connections are made, do not
let the wire come out from the tab.
Power control/Motor antenna
control wire (Blue/White)
TEL mute wire (Brown)
Connect either to the power control terminal
when using the optional power amplifier, or to the
antenna control terminal in the vehicle.
A–7 Pin (Red)
A–4 Pin (Yellow)
Connector A
Connector B
See next page
To Kenwood disc changer/External optional accessory
⁄
To connect these leads, refer to the relevant
instruction manuals.
Rear output/Sub Woofer output
Fuse (10A)
Front output
Rear output
Sub Woofer output
⁄
To use the steering wheel
remote control feature,
you need to an exclusive
remote adapter (not
supplied) matches your
car is required.
Connect to the terminal that is grounded when
either the telephone rings or during conversation.
⁄
To connect the Kenwood navigation system,
consult your navigation manual.
Steering remote control (Light Blue/Yellow)
(KDC-BT8044UY/W7644UY/W7144UY only)
USB connector (1m)
To USB device
⁄
Do not remove the cap when
you do not use the USB cable.
The connector will cause the
unit to malfunction if it gets
in touch with any metallic
part of the vehicle.
Microphone
(Accessory3)
Front output
To External Display/ Steering remote
(KDC-BT8044U/W7544U/W7044U only)
Microphone input
(KDC-BT8044U/
BT8044UY only)
AUX input (Stereo)
Use the mini-plug which is stereo type
and does not have any resistance.
48
|
KDC-BT8044U/ KDC-BT8044UY/ KDC-W7544U/ KDC-W7644UY/ KDC-W7044U/ KDC-W7144UY
Connecting Wires to Terminals