Operation Manual

8
|
KDC-BT8044U/ KDC-BT8044UY/ KDC-W7544U/ KDC-W7644UY/ KDC-W7044U/ KDC-W7144UY
Function Control
Category Item Setting Entry Setting overview Condition Page
“NR Level”** “–2” – “0”* –
“+2”
Reduces the noises generated by the surrounding
environment without changing the microphone
volume.
— *
“SP Select”** “Front”*/
“F-R”/ “F-L”
Specify the voice output speaker. *
“Call Beep”** “ON”*/ “OFF”
Output a beep from the speaker when a call comes in. *
“BT F/W Update”** —
1 sec.
Display the firmware version and update the firmware.
37
“Beep” “OFF”/ “ON”*
Setting the operation check sound (beep sound) ON/
OFF.
—
“Clock Adjust” —
1 sec. Sets the clock. —25
“Date Adjust” —
1 sec.
Sets the date.
25
“Date Mode” 7 types
1 sec.
Sets the date display mode.
25
“SYNC” “OFF”/ “ON”*
Synchronizing the RDS station time data and this units
clock.
—
“DSI” “OFF”/ “ON”*
DSI (Disabled System Indicator) of the unit blinks when
the faceplate is removed.
—
“Illumi DIM” “OFF”/ “Auto”*
/ “MNAL1” /
“MNAL2”
Sets whether the illumination is dimmed in conjunction
with the light switch of the vehicle or it is dimmed
constantly.
*
“ILM Effect” “OFF”/ “ON”*
KDC-BT8044U/ KDC-W7544U/ KDC-W7644UY:
Sets whether the key illumination color is changed in
conjunction with the key operation.
KDC-BT8044UY/ KDC-W7044U/ KDC-W7144UY:
Sets whether the key illumination brightness is
changed in conjunction with the key operation.
—
“ILM MSC SYNC” “OFF”*/ “ON”
KDC-BT8044U/ KDC-W7544U/ KDC-W7644UY:
Sets whether the key illumination color is changed in
conjunction with the sound volume.
KDC-BT8044UY/ KDC-W7044U/ KDC-W7144UY:
Sets whether the key illumination brightness is
changed in conjunction with the sound volume.
——
“Display” “OFF”/ “ON”*
Turns off the display when no operation is performed. — *
“DISP DIM “ “OFF”/ “Auto”*
/ “MNAL1” /
“MNAL2”
Dims the display part in conjunction with the light
switch of the vehicle.
*
“Contrast” “1” - “10”
Adjusting the display contrast. —
“DISP N/P” “POSI 1”/ “2”
/ “NEGA 1”/ “2”
Switches the panel display between positive or
negative.
*
“SWPRE”** “Rear”*/
“Sub-W”
Sets the preout output. *
“AMP” “OFF”/ “ON”*
Turns on/off the built-in amplifier. *
“Zone2” “Rear”*/ “Front”
Specifies the destination of AUX input sound when the
Dual Zone function is turned on.
*
“AMP Control” —
Controls the connected LX amplifier. —25
“News” “OFF”*/ “00”
– “90”
Turns ON/OFF the News Bulletin Automatic Reception
function and sets the news bulletin interrupt disabled
time.
*
“Local Seek” “OFF”*/ “ON”
Only stations whose reception is good are searched in
auto seek tuning.
—
“Seek Mode” “Auto1”*/
“Auto2”/
“Manual”
Selects the tuning mode of the radio.
*