Owner's Manual

18
ENGLISH
Auto Pairing
When you connect iPhone/iPod touch to the USB input terminal, pairing
request (via Bluetooth) is automatically activated.
Press the volume knob to pair once you have confirmed the device name.
Automatic pairing request is activated only if:
– Bluetooth function of the connected device is turned on.
–
[AUTO PAIRING] is set to [ON] . (Page21)
BLUETOOTH — Mobile phone
Receive a call
When there is an incoming call:
•
/ / / :
ZONE 2 illuminates in green color and flashes.
• The unit answers the call automatically if
[AUTO ANSWER] is set to a selected
time. (Page19)
During a call:
•
/ / / :
ZONE 1 illuminates according to the settings made for
[DISPLAY] (page
29) and ZONE 2 illuminates in green color.
• If you turn off the unit or detach the faceplate, Bluetooth is disconnected.
The following operations may differ or be unavailable depending on the
connected phone.
To On the faceplate On the remote control
First incoming call...
Answer a call
Press
or the
volume knob or
one of the number
buttons (1 to 6).
Press
.
Reject a call
Press
.
Press
.
End a call
Press
.
Press
.
While talking on the first incoming call...
Answer another
incoming call and hold
the current call
Press
. Press .
Reject another incoming
call
Press
.
Press
.
While having two active calls...
End current call and
activate held call
Press
.
Press
.
Swap between the
current call and held call
Press
. Press .
Adjust the phone
volume*1
[00] to [35] (Default: [15] )
Turn the volume
knob during a call.
Press VOL
*2 or
VOL
during a call.
Switch between hands-
free and private talk
modes*3
Press 6 IW during
a call.
( Not available )
*1, *2, *3: See page 19.
BLUETOOTH®
JS_KWD_KDC_X303_KN_EN_6th.indd 18 4/6/2018 11:26:41 AM