Owner's Manual
Table Of Contents
- Instruction Manual
- Reset
- Bluetooth PIN (0000)
- Clock Set
- Demo Mode
- Initial Settings
- Attaching / Removing Faceplate
- Table of Contents
- Parts & Controls
- Basic Operation
- Getting Started
- Radio Operation
- CD / USB / iPod / Android Operation
- AUX Input
- Pandora
- iHeartRadio
- Spotify
- SiriusXM (KDC-X303 / KDC-BT375U / KMR-D375BT)
- Bluetooth
- Audio Settings
- Display Settings
- Learning Steering Remote Control (KDC-MP375BT)
- Troubleshooting
- Specs
- Installation / Connection
- Quick Start Guide
ENGLISH
19
*1 This adjustment will not affect the volume of the other sources.
*2 Press and hold VOL
to continuously increase the volume to 15.
*3 Operations may vary according to the connected Bluetooth device.
Improve the voice quality
While talking on the phone...
1 Press the volume knob to enter
[FUNCTION]
.
2 Turn the volume knob to select an item (see the following table), then
press the knob.
3 Repeat step 2 until the desired item is selected or activated.
4 Press and hold to exit.
To return to the previous setting item, press
.
Default: [XX]
[MIC GAIN] [–10] to [+10] ([–4]): The sensitivity of the microphone increases as the
number increases.
[NR LEVEL]
[–5] to [+5] ([0]): Adjust the noise reduction level until the least noise is
being heard during a phone conversation.
[ECHO CANCEL]
[–5] to [+5] ([0]): Adjust the echo cancellation delay time until the least
echo is being heard during a phone conversation.
Make the setting for answering a call
1
Press to enter Bluetooth mode.
2 Turn the volume knob to select
[SETTINGS]
, then press the knob.
3 Turn the volume knob to select
[AUTO ANSWER]
, then press the knob.
4 Turn the volume knob to select the time (in seconds) for the unit to
answer the call automatically, then press the knob.
[01]
to
[30]
, or select
[OFF]
to cancels. (Default:
[OFF]
)
5 Press and hold to exit.
To return to the previous setting item, press
.
BLUETOOTH®
Make a call
You can make a call from the call history, phonebook, or dialing the number.
Call by voice is also possible if your mobile phone has the feature.
1 Press to enter Bluetooth mode.
“(First device name)” appears.
• If two Bluetooth phones are connected, press again to switch to the
other phone.
“(Second device name)” appears.
2 Turn the volume knob to select an item (see the following table), then
press the knob.
3 Repeat step 2 until the desired item is selected/activated or follow the
instructions stated on the selected item.
4 Press and hold to exit.
To return to the previous setting item, press
.
[CALL HISTORY] (Applicable only if the phone supports PBAP.)
1
Press the volume knob to select a name or a phone number.
• “I” indicates call received, “O“ indicates call made, “M” indicates call
missed.
• Press DISP to change the display category (NUMBER or NAME).
• “NO DATA” appears if there is no recorded call history or call number.
2
Press the volume knob to call.
JS_KWD_KDC_X303_KN_EN_6th.indd 19 4/6/2018 11:26:41 AM