KDC-X895 KDC-BT848U KDC-X595 KDC-448U CD-RECEIVER INSTRUCTION MANUAL Before reading this manual, click the button below to check the latest edition and the modified pages. Check the latest edition Take the time to read through this instruction manual. Familiarity with installation and operation procedures will help you obtain the best performance from your new CD-receiver.
Contents Before use 4 Component names 6 Function setting 6 Function setting operation Audio adjustments 7 Audio control Audio preset Memory Audio preset recall iPod control operation 14 Music search Skip search Play mode Direct music search Basic operation of Disc changer (Optional) Direct search in Disc changer (Optional) Tuner Operation 18 22 44 Displaying the SMS Downloading the SMS 26 KDC-X895/ KDC-BT848U/ KDC-X595/ KDC-448U 46 Registering Bluetooth device Registering Special blueto
HD Radio™ tuner control 54 Basic Operation Station preset memory Preset tuning Auto memory Seek mode setting iTunes tagging Direct access tuning HD Radio setting Satellite radio tuner (Optional accessory) control 58 Basic operation Category and Channel search Channel preset memory Preset tuning Channel scan Direct access tuning Seek mode setting Electronic serial number display Basic operations of remote control 62 General control In Tuner source HD Radio source In CD/Audio file source In iPod source
Before use Before using this unit for the first time This unit is initially set on the Demonstration mode. When using this unit for the first time, cancel the Demonstration mode. Refer to (page 4) of Quick start guide. 2 WARNING To prevent injury or fire, take the following precautions: • Stop the car before operating the unit. • To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit.
English | 5
Component names 1 23 4 5 Function setting 6 Function setting operation Preferences of this unit can be set in the Function setting mode. For detailed setting procedure and items, refer to the explanation for each source function. 1 Select the source Press the [SRC] button. Switch to the source to display the items to set. 2 Enter Function setting mode Press the Control knob for at least 1 second.
Audio adjustments Audio control ⁄ You can adjust following Audio Control items; • You can set Bass, Middle, and Treble for each source. About Supreme Technology to extrapolate and supplement with proprietary algorithm, the high-frequency range that is cut off when encoding at low bit rate (less than 128Kbps, Sampling frequency is 44.1kHz). Supplementing is optimized by compression format (AAC, MP3 or WMA) and processed according to bit rate.
Audio adjustments Audio preset Memory Audio preset recall Registering the value setup by Audio Control. Recalling the sound setup registered by
iPod control operation For basic operation to playback iPod contents, refer to the Quick Start Guide. Alphabet search Music search 1 Enter Music search mode Press the [ ] button twice. “MUSICSEARCH” is displayed. 2 Select Alphabet search mode Turn the Control knob to select “Alphabet Search”, and then press the Control knob. 3 Search for character You can select an alphabetic character from the list in the browse item (artist, album, etc.) currently selected.
iPod control operation Related search Direct search Browsing for music of the same artist or genre as the one being played. Searching for music by selecting a browse item and an alphabetic character(s). 1 Enter Search select mode Press the [ ] button for at least 1 second. 1 Enter Search select mode Press the [ ] button for at least 1 second. 2 Select Related search mode Turn the Control knob to select “Related Search”, and then press the Control knob.
Skip search Skip search ratio setting The number of songs to be skipped is determined by the ratio of the total number of songs in the list which is selected. Sets the ratio of skip performed with (page 11). 1 Enter Music search mode Press the [ ] button. “MUSICSEARCH” is displayed. 2 Enter Search select mode Press the [ ] button. 3 Select Skip search mode Turn the Control knob to select “Skip Search”, and then press the Control knob.
iPod control operation Play mode Registering a song in the playlist You can select a Play Mode, such as Random play and Repeat play. You can register your favorite songs to make a playlist. You can register up to ten songs in the playlist. 1 Select iPod source Press the [SRC] button. Select the “iPod” display. 2 Enter Function setting mode Press the Control knob for at least 1 second. 3 Select the Play mode Turn the Control knob to select “Play Mode”, and then press the Control knob.
Playing the playlist Deleting a song from the playlist 1 Enter Search select mode Press the [ ] button for at least 1 second. 1 Enter Search select mode Press the [ ] button for at least 1 second. 2 Select Recall playlist mode Turn the Control knob to select “Recall My Playlist”, and then press the Control knob. 2 Select Delete playlist mode Turn the Control knob to select “Delete My Playlist”, and then press the Control knob.
Music disc/Audio file (CD or USB) Operation For basic operation to playback Music disc/Audio file contents, refer to the Quick Start Guide. Music Editor media Skip search The number of songs to be skipped is determined by the ratio of the total number of songs in the list which is selected. Music search Selecting the music you want to listen to from the device or media being played now. 1 Enter Music search mode Press the [ ] button. “MUSICSEARCH” is displayed.
Play mode Function of remote control You can select a Play Mode, such as Random play and Repeat play. Searching the music by entering the track number. 1 Select CD/ USB source Press the [SRC] button. Select the “CD” or “USB” display. 2 Direct music search 1 Enter Function setting mode Press the Control knob for at least 1 second. Enter Direct Music search mode Press the [DIRECT] button on the remote control. “– –” is displayed.
Music disc/Audio file Operation Function of disc changers Function of disc changers with remote control Basic operation of Disc changer (Optional) Direct search in Disc changer (Optional) Selecting CD changer source Press the [SRC] button. Select the “CD CH” display. Searching the disc or music by entering the disc or music number. 1 Enter Direct search mode Press the [DIRECT] button on the remote control. “– –” is displayed.
English | 17
Tuner Operation For basic operation to listen to the radio, refer to the Quick Start Guide. Seek mode setting Selects the tuning mode of the radio. 1 Select Tuner source Press the [SRC] button. Select the “TUNER” display. Memorizes 18 (FM)/ 6 (AM) stations with good reception automatically. 2 Enter Function setting mode Press the Control knob for at least 1 second. 1 Select Tuner source Press the [SRC] button. Select the “TUNER” display.
Function of remote control Tuner setting Direct access tuning Sets the tuner items. Entering the frequency and tuning. 1 Select Tuner source Press the [SRC] button. Select the “TUNER” display. 2 Enter Function setting mode Press the Control knob for at least 1 second. 3 Select the Setting mode Turn the Control knob to select “Settings”, and then press the Control knob. 4 Select the desired Tuner setting item Turn the Control knob to select Tuner setting item, and then press the Control knob.
Tuner Operation PTY (Program Type) Program Type preset Selecting the Program Type below and searching for a station; Putting the Program Type in the Preset button memory and quick recall.
English | 21
Log memory Log memory recall Log memory item lock This unit automatically memorizes the previously used functions and Function setting items, which can easily be recalled. Locks Log memory items to avoid them being deleted. 1 Display the Log memory list Press the [LOG] button. 2 Recall the desired function Turn the Control knob to select function, and then press the Control knob.
Deleting a Log memory item Log memory category setting Deletes Log memory items. Sets the function category to be logged. 1 Enter Function setting mode Press the Control knob for at least 1 second. 1 Enter Function setting mode Press the Control knob for at least 1 second. 2 Select the Log delete mode The item can be selected and determined as follows. “Settings” > “Log” > “Log Delete” To select the item, turn the Control knob. To determine the item, press the Control knob.
Log memory Tuner Log memory time setting You can set the timing to log the station by the reception time. 1 Enter Function setting mode Press the Control knob for at least 1 second. 2 Select the Tuner log time set mode The item can be selected and determined as follows. “Settings” > “Log” > “Tuner Log Time Set” To select the item, turn the Control knob. To determine the item, press the Control knob.
English | 25
Display settings Selecting display type Selecting text display Shown below are examples of display types. Changes displayed information on each of the following sources: Display type Type A Type B Type C Type D Type E Display information Displays 3 lines of text. Displays 2 line of text. Displays the clock. Displays the spectrum analyzer. Displays off. 1 Enter Function setting mode Press the Control knob for at least 1 second.
In Audio file/ iPod source Information Song Title* Album name* Artist name* Title & Artist name** Album & Artist name Folder name File name Play time Spectrum analyzer & Clock Date Blank Display “Song Title“ “Album Name” “Artist Name” “Title/Artist” “Album/Artist” “Folder Name” “File Name” “P-Time” “Speana/Clock” “Date” “Blank” *Dispaly type A only **Dispaly type B only In Standby/ Auxiliary input source Information Display Source name “Source Name” Spectrum analyzer & Clock (AUX only) “Speana/Clock” Clo
Display settings Information display setting Illumination color selection Sets side and graphic parts of the display. Selecting the Illumination Color of the panel. 1 Enter Function setting mode Press the Control knob for at least 1 second. 1 Enter Function setting mode Press the Control knob for at least 1 second. 2 Select the Display select mode The item can be selected and determined as follows. “Settings” > “DISP&ILLUMI” > “Display Select” To select the item, turn the Control knob.
Display & Illumination setting “ILLUMI Dimmer” Sets the display and illumination. 1 Enter Function setting mode Press the Control knob for at least 1 second. 2 Select Display & Illumination setting mode The item can be selected and determined as follows. “Settings” > “DISP&ILLUMI” To select the item, turn the Control knob. To determine the item, press the Control knob.
General operation Adjusting the Clock Adjusting the Date 1 Enter Function setting mode Press the Control knob for at least 1 second. 1 Enter Function setting mode Press the Control knob for at least 1 second. 2 Select the Clock Adjust mode The item can be selected and determined as follows. “Settings” > “Clock&Date” > “Clock Adjust” To select the item, turn the Control knob. To determine the item, press the Control knob.
Dual clock display Clock & Date display type setting Sets time for two different cities. Sets the display type of the clock and calendar. 1 Enter Function setting mode Press the Control knob for at least 1 second. 1 Enter Function setting mode Press the Control knob for at least 1 second. 2 Select the City Select mode The item can be selected and determined as follows. “Settings” > “Clock&Date” > “City Select” To select the item, turn the Control knob. To determine the item, press the Control knob.
General operation Auxiliary input display setting Sets the display when switched to AUX source. 1 Select the AUX source Press the [SRC] button. Select the “AUX” display. 2 Enter Function setting mode Press the Control knob for at least 1 second. 3 Select the Name set mode The item can be selected and determined as follows. “Settings” > “AUX Name Set” To select the item, turn the Control knob. To determine the item, press the Control knob.
Initial setting “F/W Update #.##” Upgrades the firmware. Selecting “YES” and then pressing Control knob starts upgrading the firmware. For how to update the firmware, access our web site. http://www.kenwood.com/cs/ce/ Configures initial settings of this unit. 1 Select Standby Press the [SRC] button. Select the “STANDBY” display. 2 Enter Function setting mode Press the Control knob for at least 1 second.
General operation Demonstration mode Setting Turning the demonstration mode ON/OFF. 1 Enter Function setting mode Press the Control knob for at least 1 second. 2 Select the Demonstration mode Turn the Control knob to select “DEMO Mode”, and then press the Control knob. 3 Set the Demonstration mode Turn the Control knob to select desired value (“ON” or “OFF”), and then press the Control knob. Exit Function setting mode.
English | 35
Function of KDC-X895, KDC-BT848U, KCA-BT300/BT200 (Optional Accessory) Operation of hands-free phoning Before use KDC-X895/ KDC-BT848U • If your cell-phone is not yet registered, register (pair) it by referring to (page 8) in the Quick Start Guide or (page 36) in this document. • To register a new cell-phone, you can also refer to (page 36).
Receiving a call Calling a number in the Phone book Answering a phone call 1 Enter Bluetooth mode KDC-X895 KDC-BT848U KDC-X895 KDC-BT848U Press the [ Press the [ ] button. ] button. KDC-X595 KDC-448U KDC-X595 KDC-448U Press the Control knob. Press the [LOG] button for at least 1 second. “BT MODE” is displayed. ⁄ • The following operations disconnect the line: - Insering a CD. - Connecting a USB device.
Function of KDC-X895, KDC-BT848U, KCA-BT300/BT200 (Optional Accessory) Operation of hands-free phoning Dialing a number Calling a number in the call log 1 1 Enter Bluetooth mode Enter Bluetooth mode KDC-X895 KDC-BT848U KDC-X895 KDC-BT848U Press the [ Press the [ ] button. ] button. KDC-X595 KDC-448U KDC-X595 KDC-448U Press the [LOG] button for at least 1 second. “BT MODE” is displayed. Press the [LOG] button for at least 1 second. “BT MODE” is displayed.
Speed dialing (Preset dial) 1 Enter Bluetooth mode KDC-X895 KDC-BT848U Press the [ ] button. Registering to the Preset dial number list 1 Enter the phone number you wish to register Enter the phone number with reference to the following: Dialing a number/ Calling a number in the call log/ Calling a number in the Phone Book 2 Enter Preset memory mode Press the [PRESET] button.
Function of KDC-X895, KDC-BT848U, KCA-BT300/BT200 (Optional Accessory) Operation of hands-free phoning During a call Call waiting Disconnecting a Call Press the [SRC] button. Answering another incoming call with the current call suspended Switching to the Private mode Push the Control knob towards right or left. Switches between Private talk (“PRIVATE”) and Hands-free talk each time this button is pressed.
Clearing the Disconnection message KDC-X895 KDC-BT848U Press the [ ] button. Making a voice dialing call 1 Enter Bluetooth mode KDC-X895 KDC-BT848U KDC-X595 KDC-448U Press the [ Press the [LOG] button for at least 1 second. “HF Disconnect” disappears. KDC-X595 KDC-448U ] button. Press the [LOG] button for at least 1 second. “BT MODE” is displayed. 2 Enter voice recognize mode Turn the Control knob to select “Voice Recognize”, and then press the Control knob.
Function of KDC-X895, KDC-BT848U, KCA-BT300/BT200 (Optional Accessory) Operation of hands-free phoning Displays of phone number type (category) The category items in the Phone Book are displayed as follows: “General” / Display Information General “Home” / Home “Office” / Office “Mobile” / Mobile “Other” / Other 42 | KDC-X895/ KDC-BT848U/ KDC-X595/ KDC-448U
English | 43
Function of KCA-BT300/BT200 (Optional Accessory) Bluetooth audio operation Before Use • You need to register your Bluetooth audio player before using it with this unit. For more details, see (page 46). • You need to select the Bluetooth audio player you wish to connect. Refer to (page 48). Basic operation Selecting Bluetooth audio source Press the [SRC] button. Select the “BT AUDIO EXT” display.
English | 45
Function of KDC-X895, KDC-BT848U, KCA-BT300/BT200 (Optional Accessory) Bluetooth setup Registering Bluetooth device 4 To make your Bluetooth device (cell-phone) usable with this unit, you need to register it (pairing). You can register up to five Bluetooth devices to this unit. KDC-X895 KDC-BT848U Input the PIN code (steps 5). KDC-X595 KDC-448U When registering from Bluetooth devices 1 2 3 4 Enter a PIN code Input the PIN code registered as mentioned in (page 47).
Registering Special bluetooth device Registering PIN Code Allow registration of a special device that cannot be registered normally (pairing). By operating the Bluetooth device, specify the PIN code necessary for registering this unit. 1 1 Enter Bluetooth mode Enter Bluetooth mode KDC-X895 KDC-BT848U KDC-X895 KDC-BT848U Press the [ Press the [ ] button. ] button. KDC-X595 KDC-448U KDC-X595 KDC-448U Press the [LOG] button for at least 1 second. “BT MODE” is displayed.
Function of KDC-X895, KDC-BT848U, KCA-BT300/BT200 (Optional Accessory) Bluetooth setup Downloading the Phone book Download the phone book data from the cellphone to this unit so that you can use the Phone Book of this unit. Downloading automatically If the cell-phone supports a phone book synchronization function, the phone book is downloaded automatically after Bluetooth connection.
Deleting a registered Bluetooth device Displaying the firmware version You can delete a registered Bluetooth device. 1 1 Display the version of the firmware of this unit. Enter Bluetooth mode Enter Bluetooth mode KDC-X895 KDC-BT848U KDC-X895 KDC-BT848U Press the [ Press the [ KDC-X595 KDC-448U ] button. ] button. Press the [LOG] button for at least 1 second. “BT MODE” is displayed. KDC-X595 KDC-448U Press the [LOG] button for at least 1 second. “BT MODE” is displayed.
Function of KDC-X895, KDC-BT848U, KCA-BT300/BT200 (Optional Accessory) Bluetooth setup Adding a voice dialing command Add a voice tag to the phonebook for voice dialing. You can register up to 35 voice tags. 1 Enter Bluetooth mode Selecting “Check” (Play) 6 Press the Control knob. Play the registered voice and return to step 2. KDC-X895 KDC-BT848U Selecting “Delete” (Delete) Press the [ 6 Delete a voice tag ] button. KDC-X595 KDC-448U Press the [LOG] button for at least 1 second.
Setting a voice command for category Add a voice tag to the phone number category (type) for voice calling. 1 Enter Bluetooth mode KDC-X895 KDC-BT848U Press the [ ] button. KDC-X595 KDC-448U Press the [LOG] button for at least 1 second. “BT MODE” is displayed. 2 Enter Function setting mode Press the Control knob for at least 1 second. 3 Select Phonebook type edit mode The item can be selected and determined as follows.
Function of KDC-X895, KDC-BT848U, KCA-BT300/BT200 (Optional Accessory) Bluetooth setup Bluetooth detail setting “MIC Gain” Configures initial settings of this unit. 1 Enter Bluetooth mode KDC-X895 KDC-BT848U Press the [ ] button. “NR Level” KDC-X595 KDC-448U Press the [LOG] button for at least 1 second. “BT MODE” is displayed. 2 Enter Function setting mode Press the Control knob for at least 1 second. 3 Select Bluetooth detail setting mode The item can be selected and determined as follows.
Function of KDC-X895, KDC-BT848U, KCA-BT300/BT200 (Optional Accessory) SMS (Short Message Service) Displaying the SMS Downloading the SMS The SMS received by at the cell-phone is displayed on the receiver. A newly received message is displayed. Download the short message (SMS) received by the cell-phone so that it can be read on this unit. ¤ 1 Enter Bluetooth mode KDC-X895 KDC-BT848U • To prevent car accidents, the driver should not read the SMS while driving.
Function of KTC-HR300, KTC-HR200, KTC-HR100 (Optional Accessory) HD Radio™ tuner control Basic Operation Selecting HD Radio source Press the [SRC] button. Select the “HD RADIO” display. Selecting the band Push the Control knob towards down. Switches between the FM1, FM2, FM3, and AM bands each time you push towards down. Selecting the station Push the Control knob leftward and rightward. ⁄ • The tuning mode can be changed. Refer to (page 56).
Preset tuning Auto memory Recalling the stations in the memory. Memorizes six stations with good reception automatically. 1 Enter Preset memory mode Press the [PRESET] button. “Preset List” is displayed. 2 Select the number you want to recall from the memory Turn the Control knob to select recall number (“1” – “6”), and then press the Control knob. 1 Select Tuner source Press the [SRC] button. Select the “HD RADIO” display.
Function of KTC-HR300, KTC-HR200, KTC-HR100 (Optional Accessory) HD Radio™ tuner control Seek mode setting Selects the tuning mode of the radio. 1 Select Tuner source Press the [SRC] button. Select the “HD RADIO” display. 2 Enter Function setting mode Press the Control knob for at least 1 second. 3 Select the Seek mode The item can be selected and determined as follows. “Settings” > “Seek Mode” To select the item, turn the Control knob. To determine the item, press the Control knob.
Function of KTC-HR300 with remote control Direct access tuning Sets the HR Radio-related items. Entering the frequency and tuning. 1 2 Enter Direct access tuning mode Press the [DIRECT] button on the remote control. “– – – –” is displayed. Select Tuning item Press the [DIRECT] button on the remote control. Pressing the [DIRECT] button each time switches the following tuning items as follows.
Satellite radio tuner (Optional accessory) control Basic operation Selecting Satellite Radio source Press the [SRC] button. Select the “SIRIUS” or “XM” display. ⁄ • You need to register to the service provider to receive the service by Satellite Radio. Consult the service provider if “CALL … TO SUBSCRIBE” appears. • The radio may take a little time to start receiving after you select the Satellite Radio source. • If the signal reception fails, “Acquiring Signal”/ “No Signal” appears.
Channel preset memory Preset tuning Putting the channel in the memory. Recalling the channels in the memory. 1 Select the channel to put in the memory Push the Control knob towards right or left. 1 Enter Preset memory mode Press the [PRESET] button. 2 Enter Preset memory mode Press the [PRESET] button. 2 3 Select a number and store it in the memory Turn the Control knob to select memory number, and then press the Control knob for at least 2 seconds.
Satellite radio tuner (Optional accessory) control Channel scan Every receivable Channel is checked for 10 seconds. 1 Start Channel Scan Press the [ ] button for at least 1 second. 2 Release it when the channel you want to listen to is received Press the [ ] button for at least 1 second. Function of remote control Direct access tuning Entering the channel and tuning. 1 Enter Direct access tuning mode Press the [DIRECT] button on the remote control.
Seek mode setting Electronic serial number display Selects the tuning mode of the radio. Displays the Electronic Serial Number of satellite radio. 1 Select Tuner source Press the [SRC] button. Select the “SIRIUS” or “XM” display. 2 Enter Function setting mode Press the Control knob for at least 1 second. 3 Select the Seek mode The item can be selected and determined as follows. “Settings” > “Seek Mode” To select the item, turn the Control knob. To determine the item, press the Control knob.
Basic operations of remote control General control VOL SRC ATT ENT 5/∞ • Volume control: [VOL] • Source selection: [SRC] • Volume reduction: [ATT] When the button is pressed again, the volume returns to the previous level.
In Satellite radio tuner source ¤ CAUTION • Band selection: [FM] • Channel selection: [4]/[¢] • Recall preset channels: [1] — [6] • Keep battery out of reach of children and in original package until ready to use. Dispose of used batteries promptly. If swallowed contact physician immediately. • Do not leave the battery near fire or under direct sunlight. A fire, explosion or excessive heat generation may result. • Do not set the remote control in hot places such as on the dashboard.
Appendix About Audio file • Playable Audio file AAC-LC (.m4a), MP3 (.mp3), WMA (.wma) • Playable disc media CD-R/RW/ROM • Playable disc file format ISO 9660 Level 1/2, Joliet, Romeo, Long file name. • Playable USB device USB mass storage class • Playable USB device file system FAT16, FAT32 Even if the audio files comply with the standards listed above, the play may be impossible depending on the types or conditions of media or device.
About “KENWOOD Music Editor” • This unit supports the PC application “KENWOOD Music Editor Light ver1.1” or later. • When you use the audio file with database information added by the “KENWOOD Music Editor Light ver1.1”, you can search a file by title, album or artist name using the (page 14). • In the Instruction manual, the term “Music Editor media” is used to mean the device that contains audio files with database information added with KENWOOD Music Editor.
Troubleshooting guide Some functions of this unit may be disabled by some settings made on this unit. ! • Cannot set up Display. ▲ (page 34) is not set to Off. ! • Cannot set up “Text Select”, “Side Select”, and “Status” of “Display Select”. ▲ (page 26) is set to Displays off. ! • Cannot set up the subwoofer. • Cannot set up the low pass filter. • No output from the subwoofer. ▲ “SubWoofer” of
No Music Data/Error 15: • The connected USB device contains no playable audio file. • Media was played that does not have data recorded that the unit can play. Too Long: No Message: No short message in In Box. USB ERROR: No Record: The voice tag is not registered in the phonebook. Memory Full: The number of voice tags reaches the maximum number to be registered in the phonebook. iPod Error: Some trouble may have occurred to the connected USB device.
Specifications FM tuner section Frequency range (200 kHz step) : 87.9 MHz – 107.9 MHz Usable sensitivity (S/N = 26dB) : 11.2dBf (1 μV/75 Ω) Quieting Sensitivity (S/N = 50dB) : 19.2dBf (2.
Auxiliary input Frequency response (±3 dB) : 20 Hz – 20 kHz Input Maximum Voltage : 1200 mV Input Impedance : 10 kΩ General Operating voltage KDC-X895/ KDC-BT848U : 14.4 V (10.5 – 16V allowable) KDC-X595/ KDC-448U : 14.4 V (11 – 16V allowable) Maximum Current consumption : 10 A Installation Size (W x H x D) : 182 x 53 x 160 mm 7-3/16 x 2-1/16 x 6-5/16 inch Weight : 2.9 lbs (1.3 kg) Specifications subject to change without notice.
2CAUTION Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. In compliance with Federal Regulations, following are reproductions of labels on, or inside the product relating to laser product safety. Kenwood Corporation 2967-3, ISHIKAWA-MACHI, HACHIOJI-SHI TOKYO, JAPAN KENWOOD CORP. CERTIFIES THIS EQUIPMENT CONFORMS TO DHHS REGULATIONS N0.21 CFR 1040. 10, CHAPTER 1, SUBCHAPTER J.
