Owner's Manual

ENGLISH
23
BLUETOOTH®
To On the faceplate On the remote control
While talking on the first incoming call...
Answer another
incoming call and
hold the current call
Press
. Press .
Reject another
incoming call
Press
.
Press
.
While having two active calls...
End current call and
activate held call
Press
.
Press
.
Swap between the
current call and
held call
Press
. Press .
Adjust the phone
volume
[00] to [35]
(Default: [15] )
Turn the volume knob
during a call.
Press
or
.
• This adjustment will not affect the volume of
the other sources.
Switch between
hands-free and
private talk modes
Press
during
a call.
• Operations may vary
according to the
connected Bluetooth
device.
( Not available )
Improve the voice quality
While talking on the phone...
1 Press the volume knob to enter [FUNCTION] .
2 Turn the volume knob to select an item (see the following table),
then press the knob.
3 Repeat step 2 until the desired item is selected or activated.
4 Press and hold to exit.
To return to the previous setting item, press
.
Default:
XX
MIC GAIN LEVEL –10 to LEVEL +10 ( LEVEL –4 ):The sensitivity of the
microphone increases as the number increased.
NR LEVEL LEVEL –5 to LEVEL +5 ( LEVEL 0 ):Adjust the noise reduction level
until the least noise is being heard during a phone conversation.
ECHO CANCEL LEVEL –5 to LEVEL +5 ( LEVEL 0 ):Adjust the echo cancellation delay
time until the least echo is being heard during a phone conversation.
Make the settings for receiving a call
1
Press to enter Bluetooth mode.
2 Turn the volume knob to select an item ( 24 ), then press the knob.
3 Repeat step 2 until the desired item is selected or activated.
4 Press and hold to exit.
To return to the previous setting item, press
.
JS_KWD_KDC_X702_KN_EN_9.indd 23 7/14/2017 2:20:36 PM