Owner's Manual

ENGLISH
27
BLUETOOTH®
To On the faceplate On the remote control
Select a file from a
folder/list
Refer to “Select a file
from a folder/list” on
page 11.
( Not available )
Switch between
connected
Bluetooth audio
devices
Press 5.*
( Not available )
*
Pressing the “Play” key on the connected device itself also causes switching of sound output
from the device.
Operations and display indications may differ according to their
availability on the connected device.
Settings to use KENWOOD Remote application
KENWOOD Remote application is designed to control the KENWOOD
car receiver’s operations from the iPhone/iPod (via Bluetooth or via USB
input terminal) or Android smartphone (via Bluetooth).
Preparation:
Install the latest version of KENWOOD Remote application on your device
before connecting. For more information, visit
<www.kenwood.com/cs/ce/>.
1 Press the volume knob to enter [FUNCTION] .
2 Turn the volume knob to select an item (see the following table),
then press the knob.
3 Repeat step 2 until the desired item is selected or activated.
4 Press and hold to exit.
To return to the previous setting item, press
.
Default: XX
REMOTE APP
SELECT
Select the device (IOS or ANDROID) to use the application.
IOS YES :Selects iPhone/iPod to use the application via Bluetooth or
connected via USB input terminal.;
NO :Cancels.
If IOS is selected, select iPod BT source (or iPod 1/iPod 2/iPod USB if
your iPhone/iPod is connected via USB input terminal) to activate the
application.
• The connectivity of the application will be interrupted or disconnected
if:
– You change from iPod BT source to any playback source connected
via the USB input terminal.
– You change from iPod 1/iPod 2/iPod USB source to iPod BT source.
ANDROID YES :Selects Android smartphone to use the application via Bluetooth.;
NO : Cancels.
ANDROID LIST * Selects the Android smartphone to use from the list.
STATUS Shows the status of the selected device.
IOS CONNECTED : You are able to use the application using the iPhone/
iPod connected via Bluetooth or USB input terminal.
IOS NOT CONNECTED : No IOS device is connected to use the application.
ANDROID CONNECTED : You are able to use the application using the
Android smartphone connected via Bluetooth.
ANDROID NOT CONNECTED : No Android device is connected to use the
application.
* Displayed only when [ANDROID] of [SELECT] is set to [YES] .
JS_KWD_KDC_X702_KN_EN_9.indd 27 7/14/2017 2:20:37 PM