Owner's Manual

ENGLISH
33
Symptom Remedy
General
Sound cannot be heard. • Adjust the volume to the optimum level.
• Check the cords and connections.
“MISWIRING CHECK WIRING
THEN POWER ON” appears.
Turn the power off, then check to be sure the
terminals of the speaker wires are insulated properly.
Turn the power on again.
“PROTECTING SEND TO
SERVICE” appears.
Send the unit to the nearest service center.
• Sound cannot be heard.
• The unit does not turn on.
• Information shown on the
display is incorrect.
Clean the connectors.
( 36)
The unit does not work at all. Reset the unit. ( 3)
(For )
“SET ERROR”/
“DELETE ERROR”
Setting/deleting the remote control ID is
unsuccessful. Turn the power off, then turn on the
power and perform the operation again.
( 6)
HD Radio tuner/
Radio
• Radio reception is poor.
• Static noise while listening
to the radio.
Connect the antenna firmly.
CD/USB/iPod
Disc cannot be ejected.
Press and hold
M to forcibly eject the disc. Be careful
not to drop the disc when it is ejected. If this does not
solve the problem, reset the unit.
( 3)
Noise is generated. Skip to another track or change the disc.
Tracks do not play back as
you intended them to play.
Playback order is determined when files are
recorded.
“READING” keeps flashing. Do not use too many hierarchical levels or folders.
TROUBLESHOOTING
Symptom Remedy
CD/USB/iPod
Elapsed playing time is not
correct.
This is caused by how the tracks are recorded.
“LOADING” appears when
you enter search mode by
pressing
.
This unit is still preparing the iPod/iPhone music list. It
may take some time to load, try again later.
Correct characters are not
displayed (e.g. album name).
• This unit can only display uppercase letters,
numbers, and a limited number of symbols.
• Depending on the display language you have
selected
( 5) , some characters may not be
displayed correctly.
“NA FILE” Make sure the media contains supported audio files.
( 37)
“NO DISC” Insert a playable disc into the loading slot.
“TOC ERROR” Make sure the disc is clean and inserted properly.
“PLEASE EJECT” Reset the unit. If this does not solve the problem,
consult your nearest service centre.
“NO DEVICE” Connect a USB device, and change the source to USB
again.
“COPY PROTECTED” A copy-protected file is played.
“UNSUPPORTED DEVICE”
• Check whether the connected device is compatible
with this unit and ensure the file systems are in
supported formats.
( 37)
• Reattach the device.
“UNRESPONSIVE DEVICE” Make sure the device is not malfunction and reattach
the device.
“USB HUB IS NOT
SUPPORTED”
This unit cannot support a USB device connected via
a USB hub.
JS_KWD_KDC_X702_KN_EN_9.indd 33 7/14/2017 2:20:38 PM