CD-RECEIVER KDC-X890 KDC-MP832U INSTRUCTION MANUAL Take the time to read through this instruction manual. Familiarity with installation and operation procedures will help you obtain the best performance from your new CD-receiver. For your records Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your Kenwood dealer for information or service on the product.
Contents Safety precautions 4 Notes 5 About CDs 7 About AAC, MP3 and WMA 8 About USB device 10 Notes on Multi-function Key System 11 General features 12 Power Selecting the Source Volume Attenuator System Q Audio Control Adjusting the detail of Audio Control Audio Setup Speaker Setting Subwoofer Output TEL Mute Faceplate Angle Adjustment Theft Deterrent Faceplate Display Type Selection Graphic part Display Switching Wallpaper selecting Text Selection for Display Text Display Switching Font Col
Menu system Menu System Activating Security Code Deactivating Security Code Touch Sensor Tone Manual Clock Adjustment Date Adjustment Date Mode Synchronize Clock DSI (Disabled System Indicator) Selectable Illumination Display Illumination Control Dimmer Built-in Amp Setting G-Counter Level set G-Analyzer Reset G-Analyzer Calibration setup G-Analyzer Horsepower Gauge setup G-Analyzer Horsepower Analysis G-Graphic Select G-Analyzer Stop Watch Dual Zone System Setting B.M.S. (Bass Management System) B.M.S.
Safety precautions 2 WARNING To prevent injury while using this product, take the following safety precautions: • To prevent a short circuit and possible fire, never put any metallic objects (such as coins or metal tools) inside the product. • If you are the driver and your vehicle is moving, do not watch the product’s display or use its controls for an extended period. • Do not use this product in any way that prevents you from driving safely.
Notes • No USB device comes with this unit. You need to purchase a commercially available USB device. For the types of available USB devices, refer to (page 10). • If you experience problems during installation, consult your Kenwood dealer. • When you purchase optional accessories, check with your Kenwood dealer to make sure that they work with your model and in your area. • We recommend the use of (page 42) to prevent theft.
Notes About "Media Manager" of PC application attached to KDC-X890/MP832U • "Media Manager" is recorded in the CD-ROM attached to this unit. • Refer to the attached installation manual for the installation method of "Media Manager". • Refer to the user’s manual recorded in the installation CD-ROM and Help of "Media Manager" for the operation method of "Media Manager". • The unit can play CD/ USB device (hereafter called "ACDrive media") created by "Media Manager".
About CDs Handling CDs Removing CDs • Do not touch the recording surface of the CD. When removing CDs from this unit, pull them out horizontally. CDs that cannot be used • CDs that are not round cannot be used. • CD-R and CD-RW are easier to damage than a normal music CD. Use a CD-R or a CD-RW after reading the caution items on the package etc. • Do not stick tape etc. on the CD, or use a CD with tape stuck on it.
About AAC, MP3 and WMA The playable AAC/MP3/WMA file (hereafter called Audio file) and the media format has the following limitation. The Audio file, which is not conforming to the specification, may not play normally, or the file and folder names may not display correctly. Playable Audio file • AAC, MP3, WMA • Attach the correct extension for the Audio file (AAC: ".M4A", MP3: ".MP3", WMA: ".WMA") • Do not attach the extensions to files other than the Audio file.
Playing order of the Audio file • The Audio file plays in the order which is written by CD writing software. You may be able to set the playing order by writing the play sequence numbers such as "01" to "99" at the beginning of the file name. • Audio files are played in the order the files are written. You can specify the order of playback by numbering files in a folder and writing them by folder.
About USB device Notes on Use of the USB device This unit can play audio files stored in the flash memory and digital audio player that have a USB port (these devices are referred to as USB devices in this document). The following restrictions are placed on the types and usage of available USB devices: Available USB devices • USB devices belonging to the USB mass storage class. • USB devices whose maximum current consumption is 500 mA or less.
Notes on Multi-function Key System Multi-function Key System serves to control various functions with the [1] — [6] buttons. The basic operation of the Multi-function Key System is described below. What is the Multi-function Key System? This unit is equipped with the Multi-function Key System that enables the operation of multiple functions with one button. For example, you can enter the Display Control Mode or turn ON/OFF the Random Play by pressing the [3] button during CD play.
General features ATT Control knob VOL Release button NEXT/ MENU 1–6 ANG SRC Power Volume Turning ON the Power Press the [SRC] button. Increasing Volume Turn the [VOL] knob clockwise. Turning OFF the Power Press the [SRC] button for at least 1 second. Decreasing Volume Turn the [VOL] knob counterclockwise. Selecting the Source Attenuator Turning the volume down quickly. Press the [SRC] button.
System Q Audio Control Selecting the best sound setting preset for different types of music. 1 Select the source to adjust 1 Select the source to adjust 2 Enter Audio Control mode Press the [SRC] button. 2 Select the key function section Press the [NEXT] button. Repeatedly press the button until "SYS.Q" is displayed above the [1] button. Refer to (page 11). 3 Enter System Q mode Press the [VOL] knob. 3 Select the Basic Audio item to adjust Press the [VOL] knob.
General features Function of the KDC-X890 Adjusting the detail of Audio Control • You can exit the Audio Control mode at anytime by pressing any button except for [VOL], [ANG] and [ATT] buttons. Among the Basic Audio items, you can adjust the Bass level, Middle level, and Treble level in detail. 1 Select the Basic Audio item Select the desired item to be set in detail from followings; • Bass level • Middle level • Treble level For how to select Basic Audio items, see
- Select Main source by [SRC] button. - Adjust the volume of Front channel by [VOL] knob. - Adjust the volume of Rear channel by
General features Theft Deterrent Faceplate Display Type Selection The faceplate of the unit can be detached and taken with you, helping to deter theft. Changing the display mode. Removing the Faceplate Press the Release button. The faceplate is unlocked, allowing you to detach it. 1 Select the key function section Press the [NEXT] button. Repeatedly press the button until "DISP" is displayed above the [2] button. Refer to (page 11).
7 Source icon display part 8 Function item display 9 G-Analyzer display part 5 Exit display control mode Press the [6] ("RTN") button. • Under the display type other than "Display Type D", the function item is not displayed. When you select the display type other than "Display Type D", press [1] to [6] buttons or [NEXT] button. The function item will be displayed approximately for 5 seconds. • The indicator is displayed when the display type is set to "Display Type C" or "Display Type D".
General features Display Type A/ Display Type B Wallpaper selecting Selecting a wallpaper to display when Display Type is set to "Display Type A"/ "Display Type B". 1 Select the wallpaper display Refer to (page 17). 2 Select the wallpaper Display the wallpapers one after another Press the Control knob. Each time you press the knob, the Wallpaper scan is turned ON and OFF. When scan is ON, "SCAN" is displayed.
In Standby/ Auxiliary input source Information Source name Clock Date Display "Source Name" "Clock" "Date" In SIRIUS tuner source Information Channel Name Song Title Artist Name Composer name Category Name Label Name Comment Band & Channel Number Clock Date Display "Channel Name" "Song Title" "Artist Name" "Composer Name" "Category Name" "Label Name" "Comment" "Channel Number" "Clock" "Date" 7 Exit Display Control mode Press the [6] ("RTN") button.
General features Display Type C/ Display Type D Text Display Switching Changing the text display. 1 Select the key function section Press the [NEXT] button. Repeatedly press the button until "DISP" is displayed above the [2] button. Refer to (page 11). 2 Enter display control mode Press the [2] ("DISP") button. 3 Select the display mode Press the [1] ("MODE") button. 4 Select the display Type Push the Control knob towards [4] or [¢].
In HD Radio source Information Station name Title Frequency Clock Date Display "Station Name"* "Title"* "Frequency" "Clock" "Date" In SIRIUS tuner source Information Channel Name Song Title Artist Name Composer name Category Name Label Name Comment Band & Channel Number Clock Date Display "Channel Name" "Song Title" "Artist Name" "Composer Name" "Category Name" "Label Name" "Comment" "Channel Number" "Clock" "Date" • * If the contents of the information cannot be displayed, Play time or Frequency is dis
General features The text display in the Middle text display part In Tuner source Information Clock Date Blank Radio text (FM) Display "Clock" "Date" "Blank" "Radio Text"* In CD & External disc source Information Clock Date Blank Disc title Track title Disc name Display "Clock" "Date" "Blank" "Disc Title"* "Track Title"* "DNPS" In SIRIUS tuner source Information Clock Date Blank Channel Name Song Title Artist Name Composer name Category Name Label Comment Display "Clock" "Date" "Blank" "Channel Name" "
Display Type B/ Display Type C/ Display Type D In Audio file source Information Indicator Clock Date Blank Song title & Artist name Album name & Artist name Folder name File name Display "Status" "Clock" "Date" "Blank" "Title/Artist"* "Album/Artist"* "Folder Name" "File Name" In Standby/ Auxiliary input source Information Indicator Clock Date Blank Display "Status" "Clock" "Date" "Blank" In HD Radio source Information Indicator Clock Date Blank Title Display "Status" "Clock" "Date" "Blank" "Title"* I
General features Display Type E G-Analyzer display Switching Alternates G-Analyzer display when the Display type is set to "Display Type E". (G: gravity) • Before alternating G-Analyzer display, you are required to setup (page 44), (page 45) and (page 45). 1 Select the key function section Press the [NEXT] button. Repeatedly press the button until "DISP" is displayed above the [2] button.
6 Select the character type Press the Control knob. Each time you press the knob, the character type alternates between the types shown in the table below. Character type Alphabet upper case Alphabet lower case Numbers and symbols Special characters (Accent characters) 7 Select the characters Push the Control knob towards [FM] or [AM]. • Enter characters by using a remote control with numbers buttons. Example: If you are entering "DANCE".
Tuner features Control knob AUTO/ AME NEXT Band display 1–6 Preset station number SRC Frequency display ST indicator Tuning Tuning Mode Selecting the station. Choose the tuning mode. 1 Select tuner source Press the [SRC] button. Select the "TUNER" display. 2 Select the band Push the Control knob towards [FM] or [AM]. Each time you push the knob toward [FM], it switches between the FM1, FM2, and FM3 bands. 3 Tune up or down band Push the Control knob towards [4] or [¢].
Function of remote control Direct Access Tuning Auto Memory Entry Entering the frequency and tuning. Putting stations with good reception in the memory automatically. 1 Select the band 1 Select the band for Auto Memory Entry Press the [FM] or [AM] button. 2 Enter Direct Access Tuning mode Press the [DIRECT] button on the remote control. "– – – –" is displayed. Push the Control knob towards [FM] or [AM]. 2 Open Auto Memory Entry Press the [AME] button for at least 2 seconds.
RDS features Control knob AUTO 1–6 Band display Program Service name Radio text Radio Text Scroll PTY (Program Type) Scrolling the displayed radio text. Selecting the Program Type and searching for a station. Push the Control knob toward [FM] for at least 2 seconds. • When the (page 44) is set to OFF, the display may black out while scrolling. 1 Enter PTY mode Press the Control knob. "PTY Select" is displayed.
10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. Soft Rock Top 40 Country Oldies Soft Nostalgia Jazz Classical R&B Soft R & B Language Religious Music Religious Talk Personality Public College Weather "Soft Rock" "Top 40" "Country" "Oldies" "Soft" "Nostalgia" "Jazz" "Classical" "Rhythm & Blues" "Soft R & B" "Foreign Language" "Religious Music" "Religious Talk" "Personality" "Public" "College" "Weather" • Speech and Music include the Program type below. Music: No.7 — 19, 21 Speech: No.
CD/USB device/Audio file/External disc control features Control knob 1–6 NEXT Track number 0 SRC Play time IN indicator Playing CD & Audio file When there is no disc inserted 1 Open the panel Press the [0] button. 2 Insert a disc. Pause and play Press the Control knob. Each time you press the knob, the audio pauses or plays. Eject the disc 1 Eject the disc Press the [0] button. • When the faceplate slides open, it might interfere with the shift lever or other vehicle function.
• For the types of available USB devices and how to connect USB devices, refer to (page 10). • After you stopped playing a file contained in the USB device, you can restart playing the file from the point where you stopped its playback. Even after removing the USB device, you can restart playing the file from the point where you stopped its playback as long as the files contained in the USB device are all the same. • Be sure to insert the USB device connector as far as it will go.
CD/USB device/Audio file/External disc control features Function of remote control Direct Track/File Search Doing Track/File Search by entering the track/file number. In CD & External disc source Repeat play Track Repeat Disc Repeat (In Disc Changer) OFF Display "Track Repeat ON" "Disc Repeat ON" "Repeat OFF" 1 Enter the track/file number Press the number buttons on the remote control. • You can select Direct File Search up to 999.
Random Play Play all the songs on the disc or Audio file folder in random order. 1 Select the key function section Press the [NEXT] button. Repeatedly press the button until "RDM" is displayed above the [3] button. Refer to (page 11). 2 Turn ON/OFF the Random Play Press the [3] ("RDM") button. Each time you press the button, Random Play turns ON or OFF. When the Random mode is ON, "Random ON"/ "Disc Random ON"/ "Folder RDM ON" is displayed.
CD/USB device/Audio file/External disc control features Function of Audio file Function of Audio file Select mode File Select mode Quickly selecting the file or folder you want to hear. You can select an audio file in the folder currently being played by file name. 1 Select the key function section 1 Enter File Select mode Press the [NEXT] button. Repeatedly press the button until "FSEL" is displayed above the [5] button. Refer to (page 11).
Function of Audio file Function of Audio file Folder Select 1 mode Folder Select 2 mode Select the target folder by tracing the hierarchical levels of folders. This is convenient when managing audio files by folder. Select the target folder within the folders containing audio files. The folder which contains playable audio files is only displayed. 1 Enter Folder Select 1 mode 1 Enter Folder Select 2 mode Press the [5] ("FSEL") button. Select the "FOLDER SELECT1"/ "FOLDER SELECT" display.
CD/USB device/Audio file/External disc control features Function of ACDrive media Switching the Play mode Arrange the playing orders of the songs by categories. 1 Select the key function section Press the [NEXT] button. Repeatedly press the button until "S.MODE" is displayed above the [1] button. Refer to (page 11). 2 Select the Play mode Press the [1] ("S.MODE") button.
SIRIUS tuner control features Control knob AUTO NEXT Band display 1–6 SRC Channel number Select SIRIUS Satellite Radio Mode Switching Seek Mode Selecting the SIRIUS Satellite Radio Tuner (optional accessory) connected to this unit. Sets the seeking mode. Selecting SIRIUS Mode Press the [SRC] button. Select the "SIRIUS" display. • You need to subscribe to SIRIUS to receive the service by SIRIUS Satellite Radio. Consult SIRIUS if "CALL 888539-SIRIUS TO SUBSCRIBE" appears.
SIRIUS tuner control features Category and Channel Search Selecting the channel and category you want to receive. 1 Enter Category and Channel Search mode • You cannot search for a channel number which is not broadcasting. (KTC-SR902/KTC-SR903: optional accessory) • If you cannot receive any signal in the input Channel due to bad conditions on radio wave or other such problems, "Acquiring Signal" appears. Press the Control knob. 2 Select the Category Push the Control knob towards [FM] or [AM].
Preset Tuning Recalling the channels in the memory. 1 Select the preset band Push the Control knob toward [FM]. 2 Select the key function section Press the [NEXT] button. Repeatedly press the button until "[1]" — "[6]" are displayed above the [1] — [6] buttons. 3 Recall the channel Press the desired [1] — [6] button. Channel Scan Checks every receivable Channel for 10 seconds. 1 Start Channel Scan Press the [AUTO] button for at least 2 seconds. The channel number display blinks.
HD Radio control features Control knob SRC Band display About HD Radio • When you connect an HD Radio, Tuner features of the unit are disabled and changed to HD Radio tuner features. A portion of the setting methods including the Tuning Mode will change. • With the HD Radio tuner, you can use the similar functions to , , and of Tuner features. Refer to Tuner features for how to use the functions. Frequency display Tuning Selecting the station.
Menu system Control knob MENU SRC Menu display Menu System Setting beep sound during operation, etc. functions. The Menu system basic operation method is explained here. The reference for the Menu items and their setting content is after this operation explanation. 1 Enter Menu mode Press the [MENU] button for at least 1 second. "MENU" is displayed. 2 Select the menu item Push the Control knob towards [FM] or [AM]. Example: When you want to set the beep sound, select the "Beep" display.
Menu system In Standby mode Activating Security Code Activating the Security Code disables the usage of audio unit by someone else. Once the Security Code is activated, the entry of authorized Security Code is required to turn on the audio unit when it is removed from the vehicle. Indication of this Security Code activation prevents your precious audio unit from stealing. • Set the Security Code when the (page 54) is set to OFF.
In Standby mode 4 Adjust each item Touch Sensor Tone Setting the operation check sound (beep sound) ON/OFF. Display "Beep : ON" "Beep : OFF" Setting Beep is heard. Beep canceled. Push the Control knob towards [FM] or [AM]. 5 Repeat step 3 and 4 operation and adjust the date. 6 Exit Date adjustment mode Press the [MENU] button. In Standby mode In Standby mode Date Mode Manual Clock Adjustment Setting the date format.
Menu system In Standby mode In Standby mode Selectable Illumination Built-in Amp Setting Selecting the button illumination color as green or red. Controlling the built-in amplifier. Turning OFF this control enhances the preout quality. Display "Button : Red" "Button : Green" Setting The illumination color is red. The illumination color is green. Display "AMP : ON" "AMP : OFF" Setting The built-in amplifier activates. The built-in amplifier deactivates.
4 Reset the value Press the Control knob for at least 2 seconds. "Reset OK" is displayed. 5 Exit G-Analyzer Reset mode Press the [MENU] button. In Standby mode G-Analyzer Horsepower Gauge setup Enter vehicle class and weight to calculate horsepower. 1 Select the G-Analyzer Horsepower Gauge In Standby mode G-Analyzer Calibration setup G-Analyzer requires calibration for horizontal acceleration and braking.
Menu system G-Analyzer Horsepower Analysis This measures the horsepower and displays graph and max power. It automatically saves the highest record. • Do not use G-Analyzer Horsepower Analysis on the Public roads. • Do not use this product in any way that prevents you from driving safely. • Follow all driving laws and use common sense when using this product. • Before alternating G-Analyzer Horsepower Analysis, you are required to setup (page 45).
G-Analyzer Stop Watch The control of stop watch can be started by GAnalyzer function. Other than Standby mode/ When the Dual Zone System is ON Dual Zone System Setting Setting the Front channel and Rear channel sound in the Dual Zone System. • Do not use G-Analyzer stop watch on the Public roads. 1 Select G-Analyzer Stop Watch mode Push the Control knob towards [FM] or [AM]. Select the "Stop Watch" display.
Menu system Function of the KDC-X890 When LX AMP unit connecting AMP Control You can control the LX AMP connected to the unit. 1 Select AMP Control mode Push the Control knob towards [FM] or [AM]. Select the "AMS Control" display. 2 Enter AMP Control mode Press the Control knob for at least 1 second. Other than Standby mode Traffic Information Switching to traffic information automatically when a traffic bulletin starts even when you aren’t listening to the radio.
In HD Radio mode Receive mode Setting Sets the receive mode. 1 Select the Receive mode Push the Control knob towards [FM] or [AM]. Select the "Receive Mode" display. Press the Control knob for at least 1 second. 3 Set the Receive mode Push the Control knob towards [FM] or [AM]. Each time you push the knob, the Receive mode alternates between the modes shown in the table below. Digital Analog Display "Auto" "Digital" "Analog" Selecting the display when changing to Auxiliary input source.
Menu system Text Scroll Setting the displayed text scroll. Display "Scroll : Auto" "Scroll : Manual" Setting Repeats scroll. Scrolls when the display changes. Function of the KDC-X890 In Standby mode Picture downloading Downloading movies, wallpapers and G-Graphic. You can use downloaded pictures for the display of this unit. 1 Insert a CD-R/CD-RW. • The text scrolled is listed below.
9 Start downloading Press the Control knob for at least 2 seconds. "Downloading" is displayed. When the downloading finishes, "Finished Download" is displayed. • Picture downloading may take as long as 10 minutes. Quantity (Movie, Picture) Cancelling Downloading Press the [MENU] button. 10 Exit the downloading mode Press the [MENU] button. • Do not operate this unit,while "Downloading" is displayed to prevent data from being damaged. • The number of files that can be downloaded.
Menu system Function of ACDrive media Other than Standby mode Voice Index Audio Preset Memory Setting the announcement during the play of ACDrive media. Registering the value setup by Sound Control. The memory cannot be erased by the Reset button. Display "Voice Index : ON" "Voice Index : OFF" Setting Guide is announced. Not be announced. 1 Setup Sound Control Refer to the following operations to setup the Sound Control.
Other than Standby mode Audio Preset Recall Recalling the sound setup registered by
Menu system In Standby mode Demonstration mode Setting Sets the demonstration mode. 1 Select the Demonstration mode Push the Control knob towards [FM] or [AM]. Select the "DEMO Mode" display. 2 Set the Demonstration mode Press the Control knob for at least 2 seconds. Each time you press the knob at least 2 seconds, the Demonstration mode alternates between the settings shown in the table below. Display "DEMO Mode : ON" "DEMO Mode : OFF" 54 | Setting The Demonstration mode function is ON.
Basic Operations of remote control SRC VOL SRC ATT ATT VOL AUD 38 AUD FM+ 38 ¢ 4 4/¢ FM/AM/+/– AM– 2-ZONE DIRECT /OK ABC DEF GHI JKL MNO PRS TUV WXY DIRECT 2-ZONE [0] — [9] QZ R.VOL Loading and Replacing the battery Use two "AA"/ "R6"-size batteries. Slide the cover while pressing downwards to remove it as illustrated. Insert the batteries with the + and – poles aligned properly, following the illustration inside the case. Basic operations [VOL] buttons Adjusts the volume.
Basic Operations of remote control Audio Control In Tuner source [AUD] button Selects the Audio item to be adjusted. [FM]/ [AM] buttons Selects the band. Each time you press the [FM] button, the band alternates between the FM1, FM2, and FM3 bands. [VOL] buttons Adjusts the Audio item. • Refer to
In SIRIUS tuner source [FM] button Selects the preset band. [4]/ [¢] buttons Searches up or down channels. [0] — [9] buttons Press buttons [1] — [6] to recall preset channels. [DIRECT] button Enters and cancels the (page 27) mode. In HD Radio source [FM] button Selects the HD FM band. Each time you press the [FM] button, the band alternates between the HF1, HF2, and HF3 bands. [AM] button Selects the HD AM band. [4]/ [¢] buttons Tunes up or down bands.
Accessories/ Installation Procedure Accessories 2WARNING If you connect the ignition wire (red) and the battery wire (yellow) to the car chassis (ground), you may cause a short circuit, that in turn may start a fire. Always connect those wires to the power source running through the fuse box. 1 ..........1 2 ..........2 3 ..........4 4 ..........4 5 ..........1 Installation Procedure 1. To prevent a short circuit, remove the key from the ignition and disconnect the - battery. 2.
Connecting Wires to Terminals To USB device To use the steering wheel remote control feature, you need to an exclusive remote adapter (not supplied) matches your car is required. REMO.CONT • Do not remove the cap when you do not use the USB cable. The connector will cause the unit to malfunction if it gets in touch with any metallic part of the vehicle. • Fasten the connector with the tape so that the cable will not come off.
Installation non-Japanese cars Japanese cars 1 Refer to the section (page 62) and then remove the hard rubber frame. Align the holes in the unit (two locations on each side) with the vehicle mounting bracket and secure the unit with the accessory screws. T N N T/N T Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place.
Screwing the Faceplate on the Unit If you want to fasten the faceplate to the main unit so that it does not fall off, screw in the provided screws in the holes shown below. Bottom panel Accessory5 • Never insert the screw in any other screw hole than the one specified. If you screw them in another hole, it will contact and may cause damage to the mechanical parts inside the unit. English | B64-3382-00̲00̲K̲English.Indd 61 61 06.1.
Removing the Unit Removing the hard rubber frame 1 Engage the catch pins on the removal tool and remove the two locks on the upper level. Upper the frame and pull it forward as shown in the figure. Lock Catch Removing the Unit 1 Refer to the section (page 62) and then remove the hard rubber frame. Remove the screw (M4 × 8) on the back panel. Insert the two removal tools deeply into the slots on each side, as shown.
Troubleshooting Guide What might seem to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Before calling service, first check the following table for possible problems. ? Even if Loudness is turned ON, high-pitched tone isn’t compensated for. ✔ Tuner source is selected. ☞ High-pitched tone isn’t compensated for when in Tuner source. General ? No sound can be heard, or the volume is low. ✔ The fader or balance settings are set all the way to one side.
Troubleshooting Guide Tuner source Disc source ? Radio reception is poor. ✔ The car antenna is not extended. ☞ Pull the antenna out all the way. ✔ The antenna control wire is not connected. ☞ Connect the wire correctly, referring to the section on . ? ? The desired frequency can’t be entered with the Direct Access Tuning. ✔ A station that can’t be received is being entered. ☞ Enter a station that can be received. ✔ You’re trying to enter a frequency with a 0.01 MHz unit.
Audio file source ? ? ? Cannot play an Audio file. ✔ The media is scratched or dirty. ☞ Clean the media, referring to the CD cleaning of the section on (page 7). Eject: No disc magazine has been loaded in the changer. The disc magazine is not completely loaded. ➪ Load the disc magazine properly. No CD in the unit. ➪ Insert the CD. No Disc: No disc has been loaded in the disc magazine. ➪ Load a disc into the disc magazine. TOC Error: No disc has been loaded in the disc magazine.
Troubleshooting Guide The protective circuit in the unit activates when the temperature inside the automatic disc changer exceeds 60°C (140°F), stopping all operation. ➪ Cool down the unit by opening the windows or turning on the air conditioner. As the temperature falls below 60°C (140°F), the disc will start playing again. No Device: The USB device is selected as a source although no USB device is connected. ➪ Change the source to any source other than USB.
Specifications Specifications subject to change without notice. FM tuner section Frequency range (200 kHz space) : 87.9 MHz – 107.9 MHz Usable sensitivity (S/N = 30dB) : 9.3dBf (0.8 μV /75 Ω) Quieting Sensitivity (S/N = 50dB) : 15.2dBf (1.6 μV /75 Ω) Frequency response (±3.
B64-3382-00̲00̲K̲English.Indd 68 06.1.