KEN WOOD CD-RECEIVER K DC-X991 INSTRUCTION MANUAL Ken wood Corporation Made for GoD HY) Radio READY Aka the time ta read through this instruction manual, Familiarity with installation and operation procedures wilt help you obtain the best performance from your new CD-receiver. For your records Record the seal umber, found ors the back of the uit, in the spaces designates! an the warranty car, and in the space provided below.
Contents Safety precautions 3 Notes General features Power Selecting the Source Volume Senator Loudness Audio Control Ali Setup Sub woofer Output Supreme Setting TEL Mute function Control mode Sound Management system Position Control Equalizer WOW HD Co Ternary mode Ternary Recall mode Display Type elo Status Setting Graphic Display Selection Text Display Section fhe text display ont Carol Selection (cor Display Switching Analyzer display Selection G-analyzer Stop Watch G-Analyzer Horsepower Analysis Analyz
Safety precautions A WARNING To prevent injury while using this product, take the following safety precautions: + To prevent a short circuit and passable fire, never put ny metallic objects (such as Loins or metal tools} insensible the product. + If you are the driver ard your vehicle is moving, do not watch the products display or use its controls for an extended period. « Do not use this product in any way that prevents you from driving safely.
Notes you experience problems during installation, canst your Kara dealer, When you purchase optional accessories, check with your Kendra dealer to make sire that they quark with your modes arid in your area. Wie recommend the use of
About Audio file Playable Audio file ALPACA (maa) MP3 (mp, WMA (lawman, WY {wav} Playable disc media CO-RE/ RON Playable disc file format 150 9660 Level 1,2, Holier, Romeo, Long file name. Playable USS device USE miss storage class, iPod with RCA-IP20D Playable USB device file system FAT, PATH Although the audio files are complied! with the standards sifted! above, the play maybe impossible depending on the types of conditions of media or device.
Notes About Bluetooth Hands free control Refer ta the instruction manual of the Blusterous Hands free Sox K CA-BTI00 (optional accessory). However, the flowering control methods of the function for this unit may be different firm the Instruction manual; therefore, refer ta the following supplemental instruction. «Dialing by Using the Quick Dialing Function> 1. Press the Control knob. Select the “DIAL display. 2. Press the FNC] button. 3. Select the number to recall by turning the Conrad knots.
WOW HD, SRS and (8 symbol are trademarks of SAS Labs, Inc WOW HI technology is incarcerated under license from SRS Labs, Int Fido is a trademark of Apple, nc, registered in the U5 and other countries, The "AAC" logo is trader nark of Divinity Laboratories.
General features ATE vn Compress A fe Belem foist FC Power Turning ON the Power Crass the (SRC) button, Turning OFF the Power Press the [SRO] button for at least 1 second. Selecting the Source election method: BAC Tuber made 1 1 Pres the (SRC button, 2 Torn the Control chino of push it towards fet ar right, F Press the Control knob.
Volume Audio Control increasing Volume “Turn the [VOL] knob clockwise. Decreasing Volume Turn the [VOL] knob counterclockwise. Attenuation Turning the volume down quickly. Press the [ATT] button, Each ime you press the button, the Attenuation turns ON and OFF. When the Attenuation is ON, the "ATT" indicator fieriness. Loudness Compensating for low and high tones during low volume.
General features Audio Setup Setting the Sound system, such as Volume offset and Dual Zone. 1 Select the source to adjust Press the [SRC] button. fifer 10 Selecting the Source (page B). 2 Enter Audio Setup mode Press the [VOL] knob for at least 1 second. 3 Select the Audio Setup itemize adjust Press the [VOL] knob. Each time you press the knob, the inert tu be adjusted alternates between the terns shown in she table below. 4 Setup the Audio item Turn the [VOL] knob.
TEL Mute Function Control mode The audio system automatically mutes when a call comes in. When a calf cons in CALL 5s displayed The audio system pauses. Listening to the audio during a call Press the [SECT button. The 'CALL display disappears and the audio system comes back ON. When the call ends Hang up the phone. Thee "CALL display disappears ane the auto system comes back ON « To use the TEL tube fertilize, You nest 10 hook up the MUTE wire 10 your telephone Using a commercial telephone accessory.
General features Sound Management system 1 Enter Sound Management mode Using the Control knob, defect "DSP" > Far the operation method, refer to
4 Exit Sound Management mode Press the [FNC] button. Position Control Enter Position made. Using the Control knob, select "DSP" > “SND CONT" > "POSITION", For the operation method, refer to: function Control reed {page 11). 2 Select the Position item to adjust Turn the Central knob or push it towards left or right. 3 Enter the Position item Press the Control knob, 4 Adjust the Position tem Preset Position Setting Push the Control knob towards right or left.
General features Equalizer Control 1 Select the source to adjust Press the [SRC] button. Refer to » "SND CONT" > "EQ For the operation method, refer to «Function Control mode (page 11, 3 Select the Equalizer Control item to adjust “Turn the Control knob or push it awards deft or right. Si stem Setting “FRONT zr Font Sen i BA air Sear Sting i 4 Enter the Equalizer Control item Press the Central knob.
3 Select the WON ‘Turn the Control knob or push it towards left or right. Press the Cont W HD Control item to adjust rol knob, == Rubatos' Spike” Seder’ >" Dan” fours Rubatos Fiat SHS 30 Space Cory SBS 30 Carr Contd ion Front Tues Fear Humanization Re gt RE ibs 4 adjust the WOW HD control item Turn the Control knob or push it towards left or Eight. Each time you push the knob, the setting stalemates between the settings shown In the table below.
General features Memory Recall mode Recall the value in the memory by the memory mode. 1 Select the source to adjust Press the [SRC] button. 2 Enter rectal mode Using the Control knob, select "DSP" > "PRESET" > "RECALL For the operation method, refer to «Function Control dime (page 11. 3 Select the recall item Select the recall number using the Control knob. Tress the Control knob. Recall the valor put by Memory modes (page call?” is displayed 4 Recall the Audio Preset Defect "YES" using the Contra knob.
5 Select the Display Mode Turn the Control knob. Select from the following display mode: 6 Exit Display Mode Selection mode Press the Control knob. hinge the Inform <0 he page on the ll aerate y the Display Roe.
General features Display Type A/ Display Type B Display Type C/ Display Type 0 Text Display Selection Changing the text display. 1 Enter Text Display Selection mode Using the Control knob, select "DISPLAY" » TEXT" Far the operation method, metier 1s Control mode (page 1). 2 Select the text Tu ten the Control knob or push it towards left or right. Ser
in Auxiliary input source Ady ut pe Spm fe Cok Goth Tale Har in HD Radio source pe Sean name “Satin apse” ile Tile" frequency Entreaty Selectmen ral 8 Cock “Speak” rock ’ Display Type A/ Display Type 8/ Display Type Font Color Selection Selecting the display font color 1 Enter Font Color Refection mode Using the Control knob, select "DISPLAY" > "COLOR".
3 Start Count When Gin the vertical direction i the travel the count automatically starts “Running” s displayed ~ You can aide start the taunter hy pressing the Control knob, rad during 4 Stop Count Press the Control knob, “Swap is displayed + Tia control wil start again whee you accelerate on press the Control kta Li the Intriguer fare step 2. When you Reset the Count (While "Stop" is displayed) Press the Control knob for at least 1 second.
General features Display Type £ G-Analyzer Reset Resets the value of G-Meter, G-Counter and G Analyzer Horsepower Analysis. 1 Enter G-Analyzer Reset mode Using the Control knob, select "DISPLAY" » "GMA" > "RESET", #0 the operation method, refer to
In Standby mode Display Type £ G-Analyzer vehicle weight setup Enter vehicle weight to calculate horsepower. 1 Enter G-Analyzer vehicle weight setup mode Using the Control knob, select "DISPLAY" > “GMA > "GAUGE" > "WEIGHT". For the operation method, refer 10 function Control mode (page 113. WEIGHT INPUT" is displayed 2 Select the weight numbers Turn the Control knob. & + The weight input range is believer 1000-9959 ba 3 Select the digits to enter Push the Control knob towards right or left.
General features Station/Disc Naming (SNPS/DNPS) Attaching a title ta a Station or CD. 1 Receive/play the statistician you want to attach a title to Ati be attached 2 Enter Menu mode Using the Control knob, select "MENU". For tha operation method, refer'to
Theft Deterrent Face plate “The face plate of the unit can be detached and taken with you, helping to deter theft, Removing the Face plate Tress the Release button. ‘The face plate is unlocked, allowing you to detach it + The face plate is a precis piece of equipment and can be darn aged by shocks or jolts « Keep the facilitate in ts nameplate case while detached. + Da not expose the face plate (snd th face plate case) to direct sunlight or excessive heat or Tumidity.
Tuner features Coatroom ina a SRE stem Band ditty Front station nutter Equivalency Phys the station.
Function of remote control Direct Access Tuning Entering the frequency and tuning: 1 Select the band Press the (FM] or [AM] button. 2 Enter Dir ext Access Tuning mode Press the {DIRECT] button on the remote control. is displayed. 3 Enter the frequency Press the number buttons on the ram ate Li EATER! 0K OM) Can ceiling Direct Access Tuning: Press the [DIRECT] button on the remote control, Station Preset Memory Putting 3 station In the memory.
ROS features famine : Ei oo Heidi a PTY (Program Type) Selecting the Program oa we ad searching for a sta ¥ ter PTY moss Press the Control knob, 2 Se lest ibe Program Type “Tern the Control vols or plush it wards up or dine, 28 1 negligee
+ The Program 7 recalled Sickly {page 29 an, be put in the preset memory and a Type presets 3 Search for the selected Program Type station Push the Control knob towards [ra] or [mm]. When you want to search for athwart stations, push toward the Carolinian knob again. + When sel d 4 Exit PTY mode Press the Control knob. dl Program Type is nat found, "No PTT 5s Select anther Program Type.
Playing USB (iPod) device Playing Internal Memory Tress the [SRC] button. When the USB device Is not connected i L . Select the “internal Ternary” display. Connect the USB device Refer to «Selecting the Source {page 8) Playback of the file contained in the USE device stares. When the USB device is connected Playing External Disc Select USB source Pie snot Pig st betray dhe Select the "USB" (or Pod") display. play 3 Refer 10 «Selecting the Sources {page 8).
CD/Audio file (USB/iPod/Internal Memory] control features Drive Search Selecting the device inserted in the Multi Card Reader. 1 Put the playback to pause Press the Control knob, 2 Celesta device Push the Control knob towards up or down. 3 Restart playback Press the Control knob.
Play function of CD and Audio file Setting up the Repeat Play and Scan Play. 1 Set up the play function Using the Control knob, set your devised setup item to On/Off. For the operation method, refer to «Function Control made {page 11). When the play function is turned an, ON'is displayed ie Sa Successively phys the Audi cutest fifes of genre. “Elder RANDOM: Fiats the auto Ses is the current fewer dom.
CD/Audio file (USB/iPod/Internal Memory) control features Text/Title Scroll Scrolling the displayed CI text, Audio fife text, or MD title.
Recording & Downloading Stinging sheathe sir © Builtin Rash memory « Max recording teems Notes on recording, copying, and erasing Hex page w girlish | 35
~ Resume rte if CALLER or "NOE is selected. Crass the Control knob. NC using the Conic Can tit knavish ‘The resume function may be disabled depending the 10f the vehicle or battery: The audit fle say be ost he resume function is Disabled fie cord or ropy while the engine is rung.
Recording & Downloading Copying from USB device T Connect the USB device to copy. 2 Berra Copy omen Using the Contort knob, select "COPY He sit, a 3 select a fi Select the stdio fle or folder using the Control knob.
Satellite Radio tuner control features Cara] tonal vag wg SRC Aur Bash dysphagia Can vases Fiction icon Select Satellite Rudy Mode Switching Seek Mode Nefertiti Boxes Sets the seeking mode.
Category and Channel Search Selecting the channel and category you want to receive, 1 Enter Category and Channel Search mode Press the Control knob, 2 Select the Category Push the Control knob towards up or down. + Iti the item when the category of 2nd Text display part is selected 3 Select the Channel Push the Control knob towards flew] or [ba], + You cannot Channel search unt the category information is acquired Canceling Category and Channel Search mods Press the Contort knob.
Satellite Radio tuner control features Preset Tuning Recalling the channels in the memory. 1 Select the preset band Push the Control knob toward [FM], 2 Enter Preset Tuning Select mode Turn the Control knob. 3 Select a desired station in the memory ‘Turn the Control knob. 4 Recall the station Press the Control knob. Canceling Preset Tuning Press the [FNC] button. Channel Scan Checks every receivable Channel for 10 seconds. 1 Start Channel Scan Press the [AUTO] button for at feast 2 seconds.
HD Radio control features fowl ES SRG AUTOIMMUNE Ba dignitary Preset Stalin rattier Fervency thespian Functionalist ian About HD Radio Tuning Selecting the stat ne «When you co of the unis ve dis tare Feats rife ths the HD Fs functions ww fad wer foreshores and changed to HO Radio © 4 Select HD Radio source Bess the [SB Burton.
In Standby mode Activating Security Code Activating the Security Code disables the usage of audio nit by someone else. Once the Security Code is activated, the entry of authorized Security Case is required to turn on the audio wait when iris removed from the vehicle. Indication of this Security Case activation prevents your precious audio unit from stealing.
Menu system in Standby mode Source Select Mode Setting up the Source Select mode. of your che, JO: 10 Select Sources ore osier another “SR Select: SECS lA Displays in USB mode with iPod connected iPod mode setting Setting up the iPod operation method in File Select. “iPod ade: ON" Uses the operation rat had china Pug, Lie th op of Pod, od ade OFF In Standby mode Touch Sensor Tone Setting the operation check sound (beep sound} ON/OFF, FE __Kepis heard. boo canceled.
In Standby mode Date Mode Setting the date format. 1 Select Date Mode Turn the Control knob. Select the "Date Mode” display. 2 Enter Date mode Press the Control knob for at least 1 secant. 3 Select the date format Turn the Control knob or push it towards up or down. 4 Exit Date mode Press the [FNC] button.
Menu system In Standby mode Contrast Adjustment Adjusting the display contrast, In Standby mode Display-reversing Setting If no operation is performed for a predetermined period of time, switching between negative and positive display modes takes place automatically, Display-reversing maintains the initial brightness of the display for a long period of time. Abel sliver dizzy may ce depending on the displays mode, in Standby mode Built-in Amp Setting Controlling the built-in amplifier.
Her LX AMP unit connecting AMP Control You can control the LX AMP connected to the unit. 1 Select AMP Control mode Tarn the Control knob. Select the "AMS Control” display. 2 Enter AMP Control mode Press the Contort knob for at least 1 second, 3 Select the AMP Control item for adjustment Push the Control knob towards up or down. i the steals on the AP Instruction manual attached to the 4 Adjust the AMP Control item Push the Control knob towards right or left. 5 Exit AMP Control moxie Press the [FNC] button.
Menu system In HD Nadia mode Receive mode Setting Sets the receive mode. 1 Select the Receive mode Push the Control knob towards up or down. Select the “Receive Made” display. 2 Enter Receive mode Press the Control kno for at east 1 second. 3 Set the Receive mode Push the Control knob towards up or down. Each time you push the knob, the Receive made alternates between the modes shown in the table below.
Text Scroll Setting the displayed text scroll eats scl. Sep when te Gop changes cot strolled 1s furze hk Che Folder name File nailed WM Alum name fiche! Artist mama) Text for the Natalie radio scree, HI) Radio source, including Channel name, etc In Standby mode Built-in Auxiliary input Setting Set the Built-in Auxiliary Input faction.
Menu system In Panpipes mode Picture downloading 1 Connected the USE device or Insert a CMY Cow 3 Enter Menu mode Using the Control lab, select "MENUS, 4 Select the picture: downloading Turn the Control knob, Sect Prius 5 Enter the downgrading mods Press tha Control knob for at least ¥ second. Mi B Fructose files 0 be downloaded Tu ten the Contrast knee or push i towards up or down, Press the Control knob.
In Standby mode Firmware version display Displaying the firmware version with the unit. Turn the Control knob. Select the "FAV Version : " display. in internal Memory source internal Memory Format Perform format to delete alt audio files stored in internal memory. + The content of fo Be careful when fo ied mandatory carrot be stared. ting. 1 Enter internal Memory Press the {SRC] button.
Audio Control {AUD] button Selects the Audi item to be adjusted. {VOL] buttons Adjusts the Audio item. « Refer to audio Cont {page 9 fa the operation method, such as the procedures for Audio control and others operations.
Accessories/ Installation Procedure Accessories A + ei power is not trued ON [Pretext” is displayed), the speaker wire tay have & Short-Cr curt of touched the. chassis of the vehicle aid the proscription Faction ray have bees antiviral Therefore, the speaker wie should be checked, your cars ignition does not base an ACC antipasti, recant the ignition wits 19 & per ste that can be tuned on anal off with nonrecognition key. f you connect wie 10.
Installation non-Japanese cars Metal mounting sap {commercial iambics Firewall of teetotal support Bond the 13s of the. Foliage sleeve with a screwdriver or similar utensil and attach it is place.
Removing the hard rubber frame 1 Engage the catch pins on the removal tool and remove the two lacks ort the upper level Upper the frame and pull it forward as shown in the figure. dccessary® Removal toot 2 When the upper level is removed, remove the lower two locations.
Troubleshooting Guide Same functions of this unit may be disabled by some settings made on this unit, HE cannot switch to Aux source. PAU i not turned on. 8
What might seem to be a malfunction io your unit may just be the result of slight commiseration or misfiring. Before calling service, first check the following table for possible problems. General The Tech Sensor Tone dares not sound. The rec Jack 5 being use wr The Touch Season Tore cannot be output farm he printout jack, Switching between negative and positive display modes takes place automatically.
Troubleshooting Guide The messages shown below display your systems condition. Eject + No tet magazine ha been loaded in the change: The disc magazine is not completely kidded No CD in tie unit No Disc Nero has beer toadied i the (isc magazine, + No disc has been loathed in the dis: magazine. +The Dis quite dirty.
Wo Device: The USS device is selected as a soar although no USB device is connected Ni Device: An unsupported USS device is connected «© Far the supporter SB vices, refer tc SNE ARs ET NOON LOIS Ho Music Dates Error 15, +The connected USA device contains na playable sui fle. +The aloofness Ornery source contains no play ante audio fe, + Keck was placed that does not have of recorded has thi unit can play. TUBEROUS: The connected USE device fs ate 8 current capacity bight sham the allowable Smith.
Specifications Specifications subject th change without notice. FM tuner section USB Interface Frequency range (200 kHz space} USB Standard 87.9 MHz ~ 107.9 Mhz SUBS 1/20 Usable sensitivity (5/8 = 3008) Maximum Supply current +93 (0.8 UV/75 2500 mA Quieting Sensitivity (5/8 = 508) file System + 15.20BF (3.
KEN WOOD KEN WOOD Music Editor INSTALLATION MANUAL Ken wood Corporation © (KW/EW/E2W/MW) KEN WOOD Music Editor manages music library on your PC. lase transfers songs to a USB device for playing on Kemerovo car audio.
HA Installing install this program on your PC according to the following procedure. NOTE + Quit ail applications before installing. Procedure ans pile EAGER vin Sar Set the KEN WOOD Music Editor install disc on your PC. The installation program will start automatically. Select the desired language and click {OK}. Click { Yes], and install Microsoft .NET Framework according to the guidance shown on the screen, This screen will not be shown when Microsoft NET Framework has been installed.
Then folio the instructions displayed on the screen, Click [install]. eat thr vr \ radar anon installation starts.