DPX-U6120 DPX-U5120 DPX-MP3120 DUAL DIN SIZED CD RECEIVER INSTRUCTION MANUAL © 2010 Kenwood Corporation All Rights Reserved. B64-4805-00_01_DPXU6120_M_en.
Contents Before use 4 Bluetooth Audio Operation Component names and functions 5 Connecting a Bluetooth Device Basic Operation General operation 6 Before Using Adjusting the Clock Common Operation Function setting Operation iPod/iPhone Operation 8 Basic Operation Selecting a song by browsing iPod Play function iPod Control by Hand Mode iPod Setting Selecting the Search mode Related Search Direct Search Alphabet Search My Playlist USB device Operation 13 15 Tuner Operation Basic Operation Tuner
DSP Setup 37 Car Type Selection Speaker Setting Car Type Fine Adjustments X’Over Setting Audio Preset Memory Audio Preset Recall Log Function 40 Log Function recall Log Function item lock Deleting a Log Function item Log Function category setting Tuner Log Function time setting Bluetooth Setup Basic Operations of remote control 48 Appendix 50 Accessories/ Before installation 52 Connecting Wires to Terminals 53 Installation 54 Troubleshooting Guide 55 Specifications 58 42 Bluetooth Sett
Before use Before using this unit for the first time This unit is initially set on the Demonstration mode. When using this unit for the first time, cancel the Demonstration mode. Refer to (page 6). 2 WARNING To prevent injury or fire, take the following precautions: • Stop the car before operating the unit. • To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit.
Component names and functions 2 1 3 t r e 4 5 w q p 9 1 Disc slot When inserted a disc (label side up), the source is switched automatically and a song starts playing. 2 [0] button To eject the disc. 3 [1] – [6] button To recall the memorized station. Switches the play mode between music discs, Audio files, and iPod. 4 [DISP] button To change the display mode. 5 [ATT] button Turning the volume down quickly. 6 [ ] button To enter the music search mode. 7 [ ] button To return to previous item.
General operation Adjusting the Clock DPX-U6120 1 Press the [VOL] knob to enter the Function setting mode. 2 Before Using The item can be selected and determined as follows. ”Settings” ➜ “Clock & Date” ➜ “Clock Adjust” To select the item, turn the [VOL] knob. To determine the item, press the [VOL] knob. 3 Canceling the Demonstration Mode Cancel the demonstration mode when you use it for the first time after installation. Press [4] or [¢] button to select hour or minute to set.
Common Operation Power and source select Turns the power ON by pressing the [SRC] button. When the power is ON, select a source. Press the [SRC] button each time switches between sources. Tuner (“TUNER”) ➜ USB (“USB”) or iPod (“iPod”) (DPX-U6120/ DPX-U5120 only) ➜ CD (“CD”) ➜ Auxiliary input (“AUX”) ➜ Standby (“STDBY”/ “STANDBY”) ➜ Tuner... Function setting Operation The basic operating procedure for using this function is described below.
Function of DPX-U6120/ DPX-U5120 iPod/iPhone Operation 3 1–6 SRC 4 ¢ iPod VOL Basic Operation Playing iPod • Connect an iPod When connected, the source is switched automatically and a song starts playing. • Select iPod source Press the [iPod] button. ⁄ • KCA-iP101/iP102 (optional accessory) is recommended to connect an iPod. Select a song Operation type Move between items Select an item Skip Search Return to previous item Operation Turn the [VOL] knob. Press the [VOL] knob.
6 ⁄ • The time required to turn on the all random function may become longer depending on the number of songs in iPod. • Turning on the all random function changes the iPod browse item to “Songs”. This browse item will not be changed even if the all random function is turned off. • If the browse item is changed to search for music while the all random function is on, the all random function is turned off and the songs in the browse item are played at random.
Function of DPX-U6120/ DPX-U5120 iPod/iPhone Operation Related Search Searches for music of the same artist or genre as the one being played. 1 Select iPod source Press the [iPod] button. 2 Enter Music search mode Press the [ ] button. 3 Enter Related search mode Press the [1] button. 4 Select the Search item Turn the [VOL] knob and press it when the desired Search item is selected.
Alphabet Search You can select a song by alphabet. This function searches songs whose name contain the specified character(s) in the list of the selected Search item (artist, album, etc). 1 Select iPod source Press the [iPod] button. 2 Enter Music search mode Press the [ ] button. 3 Select search item Turn the [VOL] knob and press it when the desired item is displayed. Select the item (artist, album, etc.) you want to search. 4 Enter Alphabet Search mode Press the [3] button.
Function of DPX-U6120/ DPX-U5120 iPod/iPhone Operation My Playlist Allows you to register your favorite songs in the Playlist of this unit. You can register up to 10 songs in the Playlist. Registering Songs in the Playlist 1 2 Play the song you want to register Register the song Press the [5] button for at least 2 second. “## Stored”/ “## STORED” (Registration number) is displayed.
Function of DPX-U6120/ DPX-U5120 USB device Operation File Search 2–6 Selecting the file you want to listen to from the device being played now. 1 Select USB source Press the [SRC] button. Select the “USB” display. 2 Enter Music search mode Press the [ ] button. 3 Select a file SRC BAND 4 ¢ VOL Basic Operation Playing USB device • Connect a USB device When connected, the source is switched automatically and a song starts playing. • Select USB source Press the [SRC] button.
Function of DPX-U6120/ DPX-U5120 USB device Operation Play function Scan play Press the [2] button. Successively plays the intro of the music in the folder. When Scan Play is turned on, “File Scan ON”/ “FILE SCAN” is displayed. Pressing this button again plays songs in the normal mode starting with the song being played now. Random play Press the [3] button. Randomly plays the music in the folder. When Random Play is turned on, “Folder Random ON”/ “FOLDER RANDOM” is displayed.
Music CD/ Audio file Operation DPX-MP3120 38 Function of Internal CD source 0 Music Search 2–6 Selecting the music you want to listen to from the disc being played now. 1 Select CD source Press the [SRC] button. Select the “CD” display. 2 Enter Music search mode Press the [ ] button. 3 Search for music SRC BAND 4 ¢ VOL Basic Operation Disc play • Insert a disc. When inserted, the source is switched automatically and a song is starts playing. When a CD is inserted, the “IN” indicator is ON.
Music CD/ Audio file Operation Function of DPX-U6120 Basic Operation of Disc Changer (Optional) Select CD changer source Press the [SRC] button. Select the “CD CH” display. Moving to the next disc Press the [BAND] button. Song Select Press the [4] or [¢] button. Fast Forwards or Fast Backwards Hold down the [4] or [¢] button. Function of DPX-U6120 with disc changer and remote control Direct search in Disc changer (Optional) Searching the disc or music by entering the disc or music number.
Tuner Operation “Auto Memory”/ Memorizes 6 stations with good reception “AUTO MEMORY” automatically. Refer to (page 17). “Forced MONO”/ Reduces the noise when stereo broadcasts are “FORCED MONO” received as monaural. “ON”/ “OFF” 1–6 SRC ( BAND 4 ¢ VOL Basic Operation Selecting Tuner source Press the [SRC] button. Select the “TUNER” display. Selecting the Receiving Band Press the [BAND] button. Pressing the button switches the receiving band (FM1, FM2, FM3, AM).
Tuner Operation Preset Tuning Frequency Step Setting Recalling the stations in the memory. Changing the tuning frequency step. The original setting is FM band 50 kHz, and AM band 9 kHz. 1 2 Select the radio band Recalls the memorized station Press the [1] – [6] button. Function of remote control Direct access tuning Entering the frequency and tuning. 1 Enter Direct access tuning mode Press the [DIRECT] button on the remote control. “– – – –” is displayed.
Function of DPX-U6120 with KCA-BT200/BT300 (Optional Accessory) Bluetooth Audio Operation Basic Operation 6 SRC Selecting Bluetooth Audio source Press the [SRC] button. Select the “BT Audio” display. Pause and play Press the [6] button. 4 ¢ Connecting a Bluetooth Device Before use the Bluetooth device, you need to connect Bluetooth device to this unit. Pairing (Registering from Bluetooth devices) To make your Bluetooth Audio player usable with this unit, you need to register it (pairing).
Function of DPX-U6120 with KCA-BT200/BT300 (Optional Accessory) Operation of hands-free phoning ⁄ 1–6 DISP ATT SRC 4 ¢ LOG VOL Connecting a Bluetooth Device Before use the Bluetooth device, you need to connect Bluetooth device to this unit. The following 3 steps procedure is necessary. Step 1. Pairing (Registering from Bluetooth devices) To make your Bluetooth device (cell-phone) usable with this unit, you need to register it (pairing).
Continuing the Current Call 1 2 Press the [VOL] knob. Turn the [VOL] knob and press it when the desired item is displayed. Select “REJECT”. Answering the Waiting Call after Terminating the Current Call Press the [SRC] button. Switching between the Current Call and Waiting Call Press the [VOL] knob. Each pressing of this knob switches the calling party. Speed Dialing (Preset Dial) 1 Enter Bluetooth mode Press the [LOG] button for at least 1 second.
Function of DPX-U6120 with KCA-BT200/BT300 (Optional Accessory) Operation of hands-free phoning Calling a Number in the Call log Make a Voice Dialing Call 1 Enter Bluetooth mode Press the [LOG] button for at least 1 second. 1 Enter voice recognition mode Press the [ATT] button for at least 1 second. 2 Select the call log mode Turn the [VOL] knob and press it when the desired item is displayed. Select “Outgoing Calls” (outgoing call), “Incoming Calls” (incoming call), or “Missed Calls” (missed call).
Display of Phone Number type (category) The category items in the Phone Book are displayed as follows: Display “General” / “ ” Information General “Home” / “ ” Home “Office” / “ ” Office “Mobile” / “ “Other” / “ ” ” Mobile Other English | B64-4805-00_01_DPXU6120_M_en.
Display Settings Display Setting You can select following Display Setting items. DISP SRC 4 ¢ VOL 1 Select the source Press the [SRC] button. 2 Enter Function setting mode Press the [VOL] knob. 3 Enter Display Setting mode Turn the [VOL] knob and press it when the desired item is displayed. Select “Settings”/ “SETTINGS” > “Display & Illumination”/ “DISP & ILLUMI”. 4 Select the Function item Turn the [VOL] knob and press it when the desired item is displayed.
“ILLUMI Dimmer” Reduces the key Illumination brightness. “Auto”: Dims the illumination in conjunction with the Light switch of the vehicle. “Manual1”: Dims the illumination constantly. “Manual2”: Dims the illumination darker than Manual1. “OFF”: Does not dim the illumination. “ILLUMI Effect” Sets whether the key illumination brightness is changed in conjunction with the key operation. “ON”/ “OFF” “ILLUMI MSC Sets whether the key illumination color is SYNC” changed in conjunction with the sound volume.
Display Settings Function of DPX-U6120 In Music CD source Selecting text display Changes displayed information on each of the following sources: 1 Select the source Press the [SRC] button. 2 Enter Function setting mode Press the [VOL] knob. 3 Select Text display selection mode Turn the [VOL] knob and press it when the desired item is displayed. Select “Settings” > “Display & Illumination” > “Display Select” > “Text Select”. Turn the [VOL] knob. The selected text display part blinks.
Function of DPX-U5120/ DPX-MP3120 ⁄ • Setting is available when the 4-line display mode, 3-line display mode, Clock display mode, or Spectrum analyzer display (Spectrum analyzer&Text type) mode which allows text display. Refer to (page 24). • If the selected display item does not have any information, alternative information is displayed. • Some items cannot be selected depending on the display type and row.
Display Settings Illumination Color Selection Auxiliary Input Display Setting Selecting the Illumination Color of the panel. Selecting the display when changing to Auxiliary input source. 1 Enter Function setting mode Press the [VOL] knob. 2 Enter Illumination color selection mode Turn the [VOL] knob and press it when the desired item is displayed. Select “Settings”/ “SETTINGS” > “Display & Illumination”/ “DISP & ILLUMI” > “Color Select”/ “COLOR SELECT”.
Clock and Other Functions 5 Adjusting Date 1. Turn the [VOL] knob to adjust the year. 2. Press the [VOL] knob. 3. Turn the [VOL] knob to adjust the month. 4. Press the [VOL] knob. 5. Turn the [VOL] knob to adjust the day. 6. Press the [VOL] knob. 6 Enter Date format mode Turn the [VOL] knob and press it when the desired item is displayed. Select “Date Mode”. 7 Select Date format Turn the [VOL] knob and press it when the desired item is displayed. Select from 7 types.
Clock and Other Functions Function of DPX-U5120/ DPX-MP3120 “Beep”/ “KEY BEEP” Setting the operation check sound (beep sound) ON/OFF. “ON”/ “OFF” “Chinese” * When this is set to ON, the following character strings are displayed in Chinese: Folder name/ File name/ Song title/ Artist name/ Album name/ KCA-BT300/BT200 (optional accessory) “ON”/ “OFF” “Built in AUX”/ When this is set to ON, AUX source can be “BUILT-IN AUX” selected. “ON”: Allows AUX source to be selected.
Demonstration mode Setting Turning the demonstration mode ON/OFF. Muting volume upon reception of Phone call 1 Enter Function setting mode Press the [VOL] knob. The audio system automatically mutes upon reception of an incoming call. 2 Enter Demonstration mode setting Turn the [VOL] knob and press it when the desired item is displayed. Select “DEMO Mode”/ “DEMO MODE”. When a call comes in “CALL” is displayed. The audio system pauses.
Function of DPX-U6120 Audio Adjustments – DPX-U6120 – “Volume offset” “2Zone” “2Zone Select” “Preset” SRC 4 ¢ VOL Audio Control You can adjust the following Audio Setting items. Display “Audio Control” “SubWoofer Level” Overview You can set subwoofer level. “–15” — “0” — “+15” “DSP Set” “Bypass”: Disables the DSP function. “Through”: Enables the DSP function. “Equalizer” Sets the sound quality. - (page 33). - (page 33).
Preset Equalizer curve Select Manual Equalizer Control You can select the following Equalizer curve. You can adjust the following Equalizer Control items. Display “Natural” “User” “Rock” “Pops” “Easy” “Top 40” “Jazz” “Game” “iPod” Equalizer curve Natural User* Rock Pops Easy Top 40 Jazz Game iPod (During iPod source only) * The Equalizer curve set in the section is recalled. ( : Factory setting) 1 Select the source Press the [SRC] button.
Function of DPX-U6120 Audio Adjustments – DPX-U6120 – Listening Position Selection Listening Position Fine Adjustments The sound environment can be compensated in accordance with the selected position. According to the listening position, select the position from the following settings. Making fine adjustment of the value specified at Preset position selection per speaker. Compensation seat Not compensating.
Dual Zone System Main source and sub source (Auxiliary input) output Front channel and Rear channel separately. Display Overview “2Zone Rear Volume”* Adjust the volume of Rear channel. “0” — “35” “Detailed Setup” “2Zone” Sets the Dual Zone System. “ON”/ “OFF” “2Zone Select”* Specifies the destination of sub source sound when the Dual Zone function is turned on. “Rear”/ “Front” * The Dual Zone System is set to “ON”. ( : Factory setting) 1 Select the source Press the [SRC] button.
Function of DPX-U5120/ DPX-MP3120 Audio Adjustments – DPX-U5120/ DPX-MP3120 – “DETAILED SET” “LPF Selects cut off frequency of subwoofer output. SUBWOOFER” “85”/ “120”/ “160”/ “THROUGH” (OFF) Hz “SUB-W PHASE” Selects the phase of subwoofer output. “REVERSE” (180°)/ “NORMAL” (0°) “SUPREME SET” Turns on/off the supreme function. Can be set while Audio file source of CD/USB (excluding iPod). “ON”/ “OFF” “VOLUME Sets each source’s volume as a difference from OFFSET” the basic volume.
Function of DPX-U6120 DSP Setup Speaker Setting The speaker X’Over is automatically set when the position and size of each speaker are selected from the following items. Speaker “Front” Range Speaker Size Front “O.E.M.”, “10cm”, “13cm”, “16cm”, “17cm”, “18cm”, “4x6”, “5x7”, “6x8”, “6x9”, “7x10” “LOCATION” Speaker Location Front “Door”, “On Dash”, “Under Dash” “TWEETER” Speaker Size Tweeter “None”, “Use” “Rear” “SIZE” Speaker Size Rear “None”, “O.E.M.
Function of DPX-U6120 DSP Setup Car Type Fine Adjustments Reference point Adjusting fine tuning of the speaker position compensation value specified at (page 37). Display “FRONT” “REAR” “SW” Item Front speaker Rear speaker Subwoofer Range 0 – 440 cm 0 – 440 cm 0 – 440 cm ( Select the source Press the [SRC] button. Select a source other than “STDBY”. 2 Enter Function setting mode Press the [VOL] knob.
Select “Audio Control” > “Detailed Setup” > “X’Over”. When you press the Reset, all the sources will be the setting value which is registered. • Preset number “1” and “2”: The memory cannot be erased by the Reset button. • This function cannot be registered when the iPod Equalizer set in (page 33). 4 Select the speaker you want to set Turn the [VOL] knob and press it when the desired item is displayed. Select “Front”, “Rear”, or “SubWoofer”.
Function of DPX-U6120 Log Function Log Function item lock Locks the Log Function items to prevent them from being deleted automatically. 1 Display the Log Function list Press the [LOG] button. LOG VOL 2 Lock the Log Function item Turn the [VOL] knob to select item, and then press the [VOL] knob for at least 1 second. Locked items are indicated with “ ”. Performing this step again will unlock the locked item.
Log Function category setting Tuner Log Function time setting Sets the function category to be logged. You can set the timing to log the station by the reception time. 1 Enter Function setting mode Press the [VOL] knob. 2 Select the Log Function setting mode Turn the [VOL] knob and press it when the desired item is displayed.
Function of DPX-U6120 with KCA-BT200/BT300 (Optional Accessory) Bluetooth Setup “Bluetooth HF/ You can specify output speakers for hands-free Audio” voice communication and Bluetooth audio sound. “Front”: Outputs voice from the front speakers. “All”: Outputs voice from the front and rear speakers. “Call Beep” You can output a beep from the speaker when a call comes in. “ON”: Beep is heard. “OFF”: Beep is canceled. “BT F/W Update” Display the version of the firmware of this unit.
Registering Bluetooth device To make your Bluetooth device (cell-phone) usable with this unit, you need to register it (pairing). You can register up to 5 Bluetooth devices to this unit. Registering from this unit 1 Enter Bluetooth mode Press the [LOG] button for at least 1 second. 2 Enter Bluetooth device registration mode Turn the [VOL] knob and press it when the desired item is displayed. Select “Settings” > “PAIRING” > “Device Registration”. Search for the Bluetooth device.
Function of DPX-U6120 with KCA-BT200/BT300 (Optional Accessory) Bluetooth Setup Registering PIN Code By operating the Bluetooth device, specify the PIN code necessary for registering this unit. 1 Enter Bluetooth mode Press the [LOG] button for at least 1 second. 2 Enter PIN code edit mode Turn the [VOL] knob and press it when the desired item is displayed. Select “Settings” > “Detailed Setup” > “PIN Code Edit”. The current setting of PIN code is displayed.
Deleting a Registered Bluetooth device You can delete a registered Bluetooth device. 1 Enter Bluetooth mode Press the [LOG] button for at least 1 second. 2 Enter Bluetooth device deletion mode Turn the [VOL] knob and press it when the desired item is displayed. Select “Settings” > “PAIRING” > “Device Delete”. “(name)” is displayed. 3 Select the Bluetooth device Turn the [VOL] knob. 4 Delete the selected Bluetooth device Press the [VOL] knob.
Function of DPX-U6120 with KCA-BT200/BT300 (Optional Accessory) Bluetooth Setup Adding a Voice Dialing Command Select “PB Name Check” (Play) Add a voice tag to the phone book for voice dialing. You can register up to 35 voice tags. CompletedSelect “PB Name Delete” (Delete) 5 Press the [VOL] knob. 1 Enter Bluetooth mode Press the [LOG] button for at least 1 second. 5 2 Delete a voice tag Press the [VOL] knob.
Function of DPX-U6120 with KCA-BT200/BT300 (Optional Accessory) SMS (Short Message Service) SMS (Short Message Service) The SMS arrived at the cell-phone is displayed on the receiver. A newly arrived message is displayed. ¤ LOG VOL Downloading the SMS Download the short message (SMS) arrived at the cell-phone so that it can be read on this unit. 1 Enter Bluetooth mode Press the [LOG] button for at least 1 second. ✍✍You can also select from “Settings” in Function setting mode.
Basic Operations of remote control In Tuner source VOL SRC ATT • • • • Band select: [FM]/[AM] Station select: [4]/[¢] Recall preset stations: [1] — [6] Enter Menu List mode: [5]/[∞] ENT In USB/Music CD/Audio file source 5/∞ EXIT AUD AM FM 0—9 DIRECT • • • • • • Music select: [4]/[¢] Folder select: [FM]/[AM] Pause/Play: [ENT] Enter Menu List mode: [5] Enter Music search mode: [∞] Movement between folders/files during Search mode: [5]/[∞] • Return to previous folder: [ ] In iPod source General co
Hands-free phone control (DPX-U6120 only) Making a call • Enter Bluetooth mode: [ ] • Select a dialing method: [5]/[∞] ➜ [ENT] • Number dial input: Input a digit: [0] – [9] Input “+”: [¢] Input “#”: [FM] Input “*”: [AM] Clear the entered phone number: [4] • Make a call: [DIRECT] Receiving a call • Answer the call: [ ] • Switch between the private talk mode and the hands-free talk mode: [ENT] Call waiting • Answer Another Incoming Call with the Current Call Suspended: [ ] • Answer another Incoming Call after
Appendix About Audio file • Playable Audio file AAC-LC (.m4a), MP3 (.mp3), WMA (.wma) • Playable disc media CD-R/RW/ROM • Playable disc file format ISO 9660 Level 1/2, Joliet, Romeo, Long file name. Playable USB device USB mass storage class • Playable USB device file system FAT16, FAT32 Even if the Audio files comply with the standards listed above, the play may be impossible depending on the types or conditions of media or device.
iPod/iPhone that can be connected to this unit Made for • iPod nano (6th generation) • iPod nano (4th generation) • iPod nano (2nd generation) • iPod with video • iPod touch (4th generation) • iPod touch (2nd generation) • iPhone 4 • iPhone 3G • iPod nano (5th generation) • iPod nano (3rd generation) • iPod nano (1st generation) • iPod classic • iPod touch (3rd generation) • iPod touch (1st generation) • iPhone 3GS • iPhone • For information on the compatibility of iPod/iPhone software, visit www.kenwood.
Accessories/ Before installation Installation accessories 1 ..........1 2 • • ..........1 • ..........6 • 3 • 4 • system, connect the connectors either to both the front output terminals or to both the rear output terminals (do not mix front and rear). For example, if you connect the + connector of the left speaker to a front output terminal, do not connect the - connector to a rear output terminal. Connect the speaker wires correctly to the terminals to which they correspond.
Connecting Wires to Terminals Fuse (10A) Antenna Cord FM/AM antenna input (JASO) Front output (DPX-U6120/ DPX-U5120 only) Rear output/ Sub Woofer output To Kenwood disc changer/External optional accessory (DPX-U6120 only) To connect these leads, refer to the relevant instruction manuals.
Installation Installation Install onto the car bracket using the supplied screws (M5 × 6 mm, M5 × 7 mm). The holes of the car bracket to use will differ depending on the car model. Car Bracket Accessory3 (M5 × 7 mm) or Accessory4(M5 × 6 mm) Accessory2 (Only for NISSAN car) 54 | DPX-U6120/ DPX-U5120/ DPX-MP3120 B64-4805-00_01_DPXU6120_M_en.
Troubleshooting Guide Some functions of this unit may be disabled by some settings made on this unit. ! ! ! • Cannot set up the subwoofer. • No output from the subwoofer. • Cannot set up the subwoofer position of Manual position setting. ▲ • The Dual zone function is enabled. (page 35) • “SubWoofer” of
Troubleshooting Guide Hands-free ? ? The hands-free talk volume is low. The hands-free talk volume is set at a low level. The hands-free talk volume can be adjusted independently. Adjust it during hands-free talk. “Mic Gain” and “NR Level” (page 42). No sound is heard from the rear speakers. You are talking in the hand-free talk mode. No sound is heard from the rear speakers in the hands-free talk mode. ? No beep is heard at reception of an incoming call.
N/A Device/NA DEVICE: • An unsupported USB device is connected. • Connection to the iPod has failed. Remove the USB device and then reconnect it. Check that the connected iPod is an iPod that is supported. See (page 50) for information on supported iPods. Reset iPod/ iPhone. Err No Matching: The voice tag is wrong. Voice cannot be recognized because of an unregistered voice tag, etc.
Specifications FM tuner section Frequency range 200 kHz step : 87.9 MHz – 107.9 MHz 50 kHz step : 87.5 MHz – 108.0 MHz Usable sensitivity (S/N = 26dB) DPX-U6120: 8.1 dBf (0.7 μV/75 Ω) DPX-U5120/ DPX-MP3120: 11.2 dBf (1 μV/75 Ω) Quieting Sensitivity (S/N = 50dB) DPX-U6120: 15.3 dBf (1.6 μV/75 Ω) DPX-U5120/ DPX-MP3120: 19.2 dBf (2.
The marking of products using lasers CLASS 1 LASER PRODUCT The label is attached to the chassis/case and says that the component uses laser beams that have been classified as Class 1. It means that the unit is utilizing laser beams that are of a weaker class. There is no danger of hazardous radiation outside the unit. This symbol mark indicates that Kenwood manufactured this product so as to decrease harmful influence on the environment.
B64-4805-00_01_DPXU6120_M_en.