KENWOOD KDC-X597 KDC-BTSSSU KDC-BT355U CD-RECEIVER INSTRUCTION MANUAL AMPLI-TUNER LECTEUR DE CD MODE D'EMPLOI REPRODUCTOR DE DISCOS COMPACTOS RECEPTOR DE FM/AM MANUAL DE INSTRUCCIONES JVC KENWOOD Corporation /IIIJI -lliil Designed for Windows ~-™ Media™ Made for ~ iPod works with CiPhone PANDOR.A Take the time to read through this instrudion manual. Familiarity with installation and operation procedures will help you obtain the best performance from your new CO-receiver.
CONTENTS BEFORE USE BEFORE USE 2 BASICS 3 GETTING STARTED 4 RADIO 5 CD I USB I iPod 6 AUX 7 Pandora A warning Do not operate any function that takes your attention away from safe driving. A caution Volume setting: • Adjust the volume so that you can hear sounds outside the car to prevent accident. • Lower the volume before playing digital sources to avoid damaging the speakers by the sudden increase of the output level. • • • • 8 (for l:~•!il!f.il~/ 13•Ita:if.
BASICS Faceplate Remote control (RC-406) rr~~~~~~::rL Remote sensor (Do not expose Volume knob (turn/press) to bright sunlight.) r 13~•I=I§r=:=i~=tF=tF=tii=)=I====L=o=a=d g s Iot Detach Pull out the insulation sheet when using for the first time. How to reset How to replace the battery Detach button CR202s:Q ~3 Your preset adjustments will also be erased. Turn on the power Press(!) SRC. • Press and hold to turn off the power. Press and hold SRC to turn off the power.
GETTING STARTED 1 Press t!> SRC to enter [STANDBY). 2 Press the volume knob to enter [FUNOION). 3 Turn the volume knob to select [INITIAL SET), then press the knob. 4 Turn the volume knob to make a selection (see the following table), then press the knob. 5 Press and hold~ to exit. When you turn on the power (or after you reset the unit), the display shows: //CANCEL DEMO'' .. //PRESS// .. 'VOLUME KNOB// 1 Press the volume knob. • To return to the previous hierarchy, press~.
RADIO Default XX 1 Press(!) SRC to select TUNER. 2 Press C\ repeatedly (or press *AM- I #FM+ on RC-406) to select FM11 FM21 FM31 AM. 3 Press~ I~ (or press~ I~(+) on RC-406) to search for a station. • • To store a station: Press and hold one of the number buttons (1 to 6). To select a stored station: Press one of the number buttons (1 to 6) (or SEEK MODE Selects the tuning method for the~ I~ buttons. AUTOl: Automatically searches for a station.; AUT02: Searches for a preset station.
CD I USB I iPod CD ~: Label side Eject disc Note: Pairing request (via Bluetooth) is automatically activated if an iPhone/ iPod touch is connected through the USB input terminal. (-t10, 12) ttl : Applicable - : Not applicable The source changes to CD and playback starts. Pause or resume playback Press 6 USB Select a track/file Press~ I~ (or~ I~(+) Select a folder Press 1- I 2 +(or *AM- I #FM+ on RC-406).
CD I USB I iPod AUX --------------------------------Preparation: Select [ON] for [BUILT-IN AUX] I [BUILTIN AUX]. (-+ 4) 1 Press DIRECT. 2 Press the number buttons to enter a track/file number. 3 Press~ I~(+) to search for music. • To cancel, press~. • Not available if Random Play is selected. • Not applicable for iPod, KME Light/ KMC file. (-+16) While listening to iPod ... 1 Press C\. 2 Turn the volume knob to select a category, then press the knob. 3 Press C\ again.
pan d 0 fa® (for 13•Iil$tf4/13•MI:i..,.1e11l) Preparation: Install the latest version of the Pandora application into your device (iPhone/ iPod touch), then log in and create an account with Pandora. • Select [ON] for [PANDORA SRC]. (-t 4) Preparation: 1 Connect the optional SiriusXM Connect Vehicle Pause or resume playback Press 6 ...,.. .. (or press ENT ...,.. .. on RC-406). Thumbs up or thumbs down Press 1 •12 4.. • If thumbs down is selected, the current track is skipped.
SiriusXM™ If a locked channel or a mature channel ([MATURE CH] is set to [ON]) is selected, a pass code input screen appears. Enter the pass code to receive the channel. Default XX • To store a channel of the current band: Press and hold one of the number buttons (1 to 6). • To select a stored channel of the current band: Press one of the number buttons (1 to 6) OJ CODE SET Turn the volume knob to select a number. [I] Press ~ I~ to move to the entry position.
BLUETOOTH® You can operate Bluetooth devices using this unit. MIC (Microphone input term:y:hone (supplied) Rear panel Secure using cord clamps (not supplied) if necessary. Adjust the microphone angle If you turn off the unit or detach the control panel during a phone call conversation, the Bluetooth connection is disconnected. Continue the conversation using your mobile phone.
BLUETOOTH• Bluetooth mobile phone Receive a call Press~ or the volume knob or one of the number buttons (1 to 6) (or~ on RC-406). • The~ button illuminates and flashes in green (for 13•11U1W/ l:oXtll:i,..,..,.111) or flashes in red (for 13•Itll:ii~.,.11J) when there is an incoming call. During a call, the button illuminates in red. • When [AUTO ANSWER] is set to the selected time, the unit answers incoming call automatically.(-+ 12) Reject an incoming call Press~ SRC (or.-- on RC-406).
BLUETOOTH• Default: XX PAIRING PHONE SELEOI PHONESEL Select the phone or audio device to connect or disconnect. ------------------------ AUDIO SELEO/ AUDIO SEL DEVICE DELETE/ DVC DELETE [I] Turn the volume knob to select a device to delete, then press the knob. [I] Turn the volume knob to select [YES] or [NO], then press the knob. TRANSFER PB* : "DL PB ***"appears and transfer the phonebook of the connected phone to this unit manually.
BLUETOOTH• Bluetooth audio player 1 Press and hold ~. 2 Speak the name of the contact you want to call or the voice command to control the phone functions. Operations and display indications may differ according to their availability on the connected device. • Supported Voice Recognition features vary for each phone. Refer to the instruction manual of the connected phone for details. • This unit also supports the intelligent personal assistant function of iPhone.
AUDIO SETTINGS While listening to any source ... 1 Press the volume knob to enter [FUNGION]. 2 Turn the volume knob to select [AUDIO CONTROL]/ [AUDIO GRL], then press the knob. 3 Turn the volume knob to make a selection (see the following table), then press the knob. Repeat step 3 until the desired item is selected or activated. 4 Press and hold~ to exit. PRESET EQ NATURAU USER/ ROCK/ POPS/ EASY/TOP40/ JAW POWERFUL: Selects a preset equalizer suitable to the music genre.
DISPLAY SETTINGS 1 Press the volume knob to enter [FUNGION]. 2 Turn the volume knob to select [SETTINGS], then press the knob. 3 Turn the volume knob to make a selection (see the following table), then press the knob. DISP DIMMER ON: Dims the display illumination.; OFF: Cancels. TEXT SCROLL AUTO/ ONCE: Selects whether to scroll the display information automatically, or scroll only once.; OFF: Cancels. BT DVC STATUS (See the table on the left column.
MORE INFORMATION General • This unit can only play the following CDs: cOJD§@ cOJo§@ cOJD§@ &'ilm ~ ·······~ • Detailed information and notes about the playable audio files are stated in an online manual on the DIOITALAUDIO following site: www.kenwood.com/cs/ce/audiofile/ Playable files • Playable Audio file: AAC (.m4a), MP3 (.mp3), WMA (.wma) • Playable disc media: CD-R/RW /ROM • Playable disc file formats: ISO 9660 Levell /2, Joliet, Romeo, Long file name.
TROUBLESHOOTING Sound cannot be heard. "PROTECT" appears and no operations can be done. • Adjust the volume to the optimum level. • Check the cords and connections. Check to be sure the terminals of the speaker wires are insulated properly, then reset the unit. If this does not solve the problem, consult your nearest service center. "NO MUSIC" appears. Connect a USB device that contains playable audio files. "NA DEVICE" appears. Connect a supported USB device, and check the connections.
TROUBLESHOOTING ADD ERROR"I ADD ERR" • "SEARCH ERROR"I "SEARCH ERR" New station creation is unsuccessful. No Bluetooth device is detected. • Search from the Bluetooth device again. • Reset the unit.(-+ 3) "CHECK DEVICE"I "CHK DEVICE" Check the Pandora application on your device. Pairing cannot be made. ..."' "NO SKIPS" The skip limit has been reached. c::: "NO STATIONS" No station is found. • Make sure you have entered the same PIN code to both the unit and Bluetooth device.
SPECIFICATIONS FM Frequency Range •:olll$tr4/ 13•M=iieie1e11J: Version Bluetooth Ver.2.1 +EDR Certified 87.9 MHz to 107.9 MHz (200kHz space) Frequency Range 2.402 GHz to 2.480 GHz Output Power +4 dBm (MAX), 0 dBm (AVE) Power Class Maximum Communication Range Line of sight approx. 10 m (32.
z lnstallating the unit (in-dash mounting) -u 0 1 1- w z z 0 u ............ z -cc 0 I- Bend the appropriate tabs to hold the mounting sleeve firmly in place . .... .... cc 1"'z When installing without the mounting sleeve 1 Remove the mounting sleeve and trim plate from the unit. 2 Align the holes in the unit (on both sides) with the vehicle mounting bracket and secure the unit with the supplied screws. - @ @ @@ /I ~T!J 05mm How to remove the unit Basic procedure 1 Detach the faceplate.
Wiring connection Part list for installation [Ti;f!l:iit:tiif"mmomnonnooooonnmmo•moooTUi~I!J!tiffmnmo;@m(®)os~b~~~f~~-~-~~~-~-~nonoomoommmnn•~ ! MIC (Microphone input terminal) (-+ 10) jl~ ~ !ltottJ:i ..1e1e11J ., ! ~@ @ Front output ~~ ~ Front output ! 1 ® ! ! ~~ ~ Rear/subwoofer output ! ~ @Rear output ! .. ..................................................................................................................... ......................................................................
CAUTION Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. In compliance with Federal Regulations, following are reproductions of labels on, or inside the product relating to laser product safety. JVC KENWOOD Corporation 2967-3, ISHIKAWA-MACHI, HACHIOJI-SHI, TOKYO, JAPAN THIS PRODUCT COMPLIES WITH DHHS RULES 21 CFR SUBCHAPTER J IN EFFECT AT DATE OF MANUFAGURE.
MILITARY Units purchased through the U.S.A. military exchange service overseas may be serviced under warranty in the continental U.S.A.. subject to lhe !allowing conditions. 1) The original warranty is in effect. 2) Proof of purchase is provided to lhe servicer. WARRANTY FOR MILITARY MARKET Kenwood corporation is proud ofthe quality and workmanship of itsaudio equipment. Thisunit has been properly designed, tested and inspected before II was shipped to you.
U.S.A. CANADA KENWOOD USA CORPORATION WHO IS PROTECTED EXCLUSION OF DAMAGES KENWOOD WARRANTY This warranty is enforceable only by the original purchaser. KENWOOD'S LIABILITY FOR ANY DEFECTIVE PRODUCT IS LIMITEDTOTHEREPAIRORREPtACEMENTOFTHEPRODUCT AT OUR OPTION. KENWOOD SHALL NOT BELIABLEFOR: 1. INSTALLATION OR REMOVAL CHARGES, DAMAGE TO OTHER PROPERTY CAUSED BY ANY DEFECTS IN KENWOOD CAR STEREO COMPONENTS, DAMAGES BASED UPON INCONVENIENCE, LOSS OF USE OF THE PRODUCT: OR 2.
