GPS NAVIGATION SYSTEM DNX520VBT INSTRUCTION MANUAL © B64-4644-00/00 (EW) B64-4644-00_00_VW_E_En.indd 1 09.12.
Contents Before Use Notes How to read this manual 4 5 8 Initial Setup 77 Radio Listening 32 Functions of the buttons on the front panel 10 Getting Started 12 How to Display the Navigation Screen How to Select the Source How to Set a Medium / a Device Basic Operation How to Display the Source Control Screen How to Display Top Menu Screen Operation on the Playback Screen of Visual Sources How to Display the Easy Control Screen 12 12 13 14 14 15 16 17 Watching DVD/Video CD 18 Playback Screen Easy
Hands-Free Phoning Before Use Downloading the Phonebook Receiving a Call During a Call Call Waiting Making a Call Calling by Phonebook Calling by Entering a Phone Number Making a Call Using Call Records Calling by Voice Recognition Controlling Tone-based Services Setting Up the Hands-Free Phone Voice Registration Key Word Voice Registration Phone Number Preset SMS (Short Message Service) Audio Control Audio Control Menu Audio Control Equalizer Control Tone Setup Zone Control 42 42 42 43 43 43 44 45 45 46
Before Use 2WARNING To prevent injury or fire, take the following precautions: • To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit. • Do not watch or fix your eyes on the unit’s display when you are driving for any extended period. How to reset your unit • If the unit or the connected unit fails to operate properly, press the Reset button. The unit returns to factory settings when the Reset button is pressed.
Notes About Audio files List of playable discs Disc types DVD CD Others Standard Support DVD Video DVD Audio DVD-VR DVD-R ‡ × ‡ ‡ DVD-RW ‡ DVD+R ‡ DVD+RW ‡ DVD-R DL (Dual layer) DVD+R DL (Double layer) DVD-RAM Music CD ‡ ‡ × ‡ CD-ROM ‡ CD-R ‡ CD-RW ‡ DTS-CD Video CD (VCD) Super video CD Photo CD CD-EXTRA ‡ ‡ × × % HDCD % CCCD Dualdisc Super audio CD × × % Remark Not compatible with CPRM.
Notes About Picture files About USB device • Acceptable picture files JPEG • Extensions jpg, jpeg • Acceptable media CD-R/RW/ROM, DVD±R/RW, mass-storage-class USB device Acceptable discs, disc formats, USB device file system, file and folder names and playing order are the same as those for audio files. See . • In this manual, the word "USB device" is used for flash memories and digital audio players which have USB terminals.
Region codes in the world The DVD players are given a region code according to the country or area it is marketed, as shown in the following map. 1 5 2 6 1 2 3 1 4 5 2 4 DVD disc marks Operation regulatory marks Symbol With this DVD, some functions of this unit such as the play function may be restricted depending on the location where the DVD is playing. In this case, the following marks will appear on the screen. For more information, refer to the disc manual.
How to read this manual This manual uses illustrations to explain its operations. Source Control Screen The displays and panels shown in this manual are examples used to provide clear explanations of the operations. For this reason, they may be different from the actual displays or panels used, or some display patterns may be different. Switches to the source control screen to use various functions. 1 Display the Source Control Screen See .
Fu Function Icon Icons representing available functions are shown below. : Function of DVD-VIDEO playback. : Function of DVD-VR playback. : Function of Video CD playback. : Function of CD (CD-DA) playback. : Function of Audio File playback. : Function of MPEG file playback. : Function of DivX file playback. : Function of JPEG file playback. : Function of Disc (DVD, CD) media. : Function of USB device. FM : Function of FM reception. Other marks Press 2 seconds or more Press the button, denoted by 2sec.
Functions of the buttons on the front panel Security indicator (page 62) A B Disc slot (page 13) Remote control sensor NAV DVD C SRC TUNER D TEL TV E FNC AV OUT USB V.OFF Reset button (page 4) F AUD ATT VOL iPod /AV-IN NAV MAP G 1 sec. : Press for more than 1 second A B Ejects the disc. Displays the navigation screen. When the navigation screen has already been displayed, it switches to the currently selected source screen. 10 C Turns the power On.
Functions of the buttons on the front panel F G Volume adjustment. (Turn the knob either way.) Attenuation of the volume On/Off. (Press the knob.) 1 sec. Displays Tone Control screen.*2 T Switches to the selected source.*3 ⁄ *2 The display may not switch to Tone Control screen in some conditions. *3 [TV] button can be switched to [VIDEO1], and [USB] button to [iPod]. For how to assign the source to the button, refer to (page 59).
Getting Started How to Display the Navigation Screen How to select the source by one-touch operation DVD NAV TUNER TV USB The navigation screen appears. • For how to set up and use the navigation function, see the Navigation Instruction Manual. ⁄ • [TV] button can be switched to [VIDEO1], and [USB] button to [iPod]. For how to assign the source to the button, refer to (page 59). For how to operate each source, see the following pages.
Getting Started How to Set a Medium / a Device 7 USB device 7 Disc media CA-U1EX (Optional accessory) If a disc is already inserted, it is ejected by pressing the [0] button. CA-U1EX (optional accessory) is required to connect a USB device. To disconnect the USB device, touch the [0] button on the source control screen, and then disconnect the USB device. See
Basic Operation How to Display the Source Control Screen DVD On the Source Control screen you can find all the control buttons for the selected source. TUNER Source Control screen TV USB The Source Control screen appears. 7 While watching the playback screen of a visual source • For how to use each button, see the operation pages of each source. How to display the Source Control screen 7 While watching the navigation screen FNC V.OFF The Source Control screen appears.
Basic Operation How to Display Top Menu Screen Top Menu screen is the entrance to all the functions. You can enter source operation screen as well as various setup menu from this screen. Top Menu screen How to display the Top Menu screen Buttons on the Top Menu screen V ] Switches to the navigation screen. [NAV [SRC] Switches to the source control screen of the selected source. The icon of this button changes according to the selected source. [TEL ] Switches to the Hands Free Main screen.
Basic Operation Operation on the Playback Screen of Visual Sources How to display the playback screen DVD While watching visual sources, basic operation is possible by touching the screen. TUNER The screen has 4 function areas. The function of each area is different depending on the sources. (Some areas are unavailable for some sources.) TV USB Playback screen of a visual source 2 1 3 4 Basic operation of each area 1 Reverse search.
Basic Operation How to Display the Easy Control Screen Basic operation buttons of the selected source can be displayed on the playback screen of visual sources so that you can control the source without switching the screen. Easy Control screen Buttons on the Easy Control screen [∞] Changes the function as follows by touching the [∞] button. [SCRN] Displays Screen Control screen (page 41). [TEL] Switches to the Hands Free Main screen (page 44). [1], [¡], [4], [¢], [7], [£8] Buttons for source control.
Watching DVD/Video CD You can play DVD/Video CD using various functions. Playback Screen Easy Control Screen Basic functions are available even when the playback screen is displayed. Displays the basic operation buttons on the screen. 1 Display the Playback Screen 1 Display the Easy Control Screen See (page 16). 2 Operation on the Playback Screen See (page 17).
Source Control Screen Switches to the source control screen to use various playback functions. 1 Display the Source Control Screen See (page 14). 2 Operation on the Source Control Screen "3" Play Mode Display "T"/ "C"/ "R"/ "P" Play Time Display Use the [TIME] to change play time display. [ ] When appears, the text display is scrolled by touching it. Multi Function DVD-VIDEO/DVD-VR 1 [ [ ] Closes the multi function bar. ] Opens the multi function bar.
Watching DVD/Video CD DVD-VIDEO Disc Menu Selects an option from the DVD-VIDEO Disc Menu. 1 Display the Playback Screen See (page 16). 2 Display the Menu Control 1 screen ⁄ • Touching the central part of the monitor also turns on the Highlight Control. • To cancel Highlight Control, press the [FNC] button. • The Highlight Control is cleared automatically after approximately 10 seconds.
[Zoom] Changes the zoom ratio at 4 levels (2 times, 3 times, 4 times, or off ) each time you touch. [2], [3], [5], [∞] Scrolls the screen in the direction you touch. [Return] Returns to the Menu Control 2 screen. [Exit] Exits the Zoom Control screen. DVD-VR Menu Control Selects an option from the DVD-VR Disc Menu. 1 Display the playback screen See (page 16).
Watching DVD/Video CD Video CD Zoom Control Displays an enlarged VCD screen. 1 Display the playback screen See (page 16). 2 Display the Zoom Control screen 3 Operation on the Zoom Control screen [Zoom] Changes the zoom ratio at 2 levels (2 times or off ) each time you touch. [2], [3], [5], [∞] Scrolls the screen in the direction you touch. [Exit] Exits the Zoom Control screen. 22 DNX520VBT B64-4644-00_00_VW_E_En.indd 22 09.12.
Music Disc/ Audio File Listening & Video File/ Picture File Watching You can recall various control screens during playback of CD, audio file, video file and picture file. • See (page 5) for playable discs. • See (page 5), (page 5) or (page 6) for playable files. Source Control Screen Switches to the source control screen to use various playback functions.
Music Disc/ Audio File Listening & Video File/ Picture File Watching Audio File Au MPEG/DivX® JPEG [REP] Repeats the present file or data. [FREP] Repeats the music or data of the present folder. [RDM] Starts or stops Random Play (to play files of the present folder in random order). Not available if there are only picture files. [4Line]/ [2Line] Switches the number of lines displayed in the Information Display. [FOLD]/ [FLIST] Displays the folder list. [PLIST] Audio File in USB Displays the play list.
Play list Audio File in Au USB USB device select Selects the connected USB device (or a partition). 1 1 Display the Source Control Screen See
Music Disc/ Audio File Listening & Video File/ Picture File Watching Link search (Audio file in USB) Playback Screen (Video file, Picture file) Searches for another song of the currently selected artist. Basic functions are available even when the playback screen is displayed. 1 Display the Source Control Screen 1 Display the Playback Screen See
Easy Control Screen (Video file, Picture file) Displays the basic operation buttons on the screen. 1 Display the Easy Control Screen See (page 17). Picture Control Adjusting the picture display. 1 Display the Playback Screen See (page 16). 2 Display the Picture Control Screen 2 Operation on the Easy Control Screen 1 2 3 1, 2 Switches to the Playback screen. 3 Displays the Source Control screen.
Music Disc/ Audio File Listening & Video File/ Picture File Watching Movie Menu Control Selects an option from the Movie Menu. 1 Display the playback screen See (page 16). 2 Display the Menu Control screen 3 Operation on the Menu Control screen [SUB] Switches the subtitle language. [Audio] Switches the voice language. [Exit] Exits the Menu Control screen. 28 DNX520VBT B64-4644-00_00_VW_E_En.indd 28 09.12.
iPod Control You can control and listen to songs in your iPod by connecting an iPod to this unit with KCA-iP240V (optional accessory). You can also display video contents on this unit when connecting an iPod with video. Playback Screen Easy Control Screen Basic functions are available even when the playback screen is displayed. Displays the basic operation buttons on the screen.
iPod Control Source Control Screen Multi Function Switches to the source control screen to use various playback functions. 1 Display the Source Control Screen See (page 14). 2 Operation on the Source Control Screen 1 [38] Plays or pauses. [1], [¡] Fast Forwards or Fast Backwards. [4], [¢] Selects Music/Video. [List] Displays the iPod list. (page 31) [ ] Switches to the playback screen.
iPod List Link Search (Music file) Lists and searches music/video contained in the iPod. Searches for another song of the currently selected artist. 1 Display the Source Control Screen 1 Display the Source Control Screen See
Radio Listening Various control screens appear in the Tuner Source mode. Source Control Screen Multi Function Switches to the source control screen to use various functions. 1 Display the Source Control Screen See (page 14). 2 Operation on the Source Control Screen 1 [FM] Switches to the FM1/2/3 band. [AM] Switches to the AM band. [TI] Turns the Traffic Information function On or Off. See , (page 35). [4], [¢] Tunes in a station.
Preset Select Auto Memory Lists and selects memorized station. Stores stations with good reception in memory automatically. 1 Display the Source Control Screen See (page 32). 2 Display the Tuner Preset List Screen 1 Display the Source Control Screen See (page 32). 2 Select a band you wish to store in memory 3 Select a station 3 Select the Auto Memory mode 1 1 Memorized stations are displayed. Touch to tune in.
Radio Listening Manual Memory Radio Text Stores the current receiving station in memory. You can display the radio text. (Only when receiving the FM broadcast) 1 Display the Source Control Screen See (page 32). 2 Select a station you wish to store in memory 1 Select a station See (page 32). 2 Display the radio text 3 Store in memory 1 2 sec. Continue to touch until the memory number appears.
Traffic Information Search by Program Type When a traffic bulletin starts, any source is switched to the traffic information and it is displayed automatically. A program is tuned when you set its program type. (Only when receiving the FM broadcast) 1 Display the Source Control Screen See (page 32). 1 Display the Source Control Screen See (page 32). 2 Enter Program Type Search mode 2 Set the Traffic information mode When the traffic bulletin starts...
TV Watching Various control screens appear in the TV source mode. You can only operate TV with the optional accessory TV Tuner connected. Function During TV Screen Easy Control Screen Basic functions are available even when the TV screen is displayed. Displays the basic operation buttons on the screen. 1 Display the TV screen 1 Display the Easy Control Screen See (page 16).
Source Control Screen Switches to source control screen to use various functions. 1 Display the Source Control Screen See (page 14). 2 Operation on the Source Control Screen 1 [AME] Selects the Auto Memory mode. See (page 38). [SEEK] Switches the Seek mode. The mode is switched in the following order each time you touch the button. Display Setting "AUTO1" Tunes in a station with good reception automatically.
TV Watching [Enter] Executes selected menu item. [Return] Returns to the previous screen. [Exit] Returns to Digital TV screen. Manual Memory (only with KTC-V300E or KTC-V301E (optional accessory) connected) ⁄ Stores the current receiving channel in memory. • When using the remote control unit to operate the TV menu, use the one of KTC-D500E. 1 Display the Source Control Screen See (page 37).
Preset Select Set Station Name Lists and selects memorized station. Assigns a name to a station. 1 Display the Source Control Screen 1 Tune in to the station to name See (page 37). 2 Start Preset Select See (page 37). 2 Start Name set 3 Select a station 1 3 Enter the name See (page 40) for information on how to enter a name. 1 Memorized stations are displayed. Touch to tune in. [ ] Switches to the TV screen.
Other Functions Muting Audio Volume upon Reception of Phone Call Character Entry Character Entry screen 1 When a telephone call is received... The Phone Call ("CALL") screen appears, and system is paused. Phone Call ("CALL") screen 1 Enters characters. [2], [3] Shifts the cursor. [5], [∞] Scrolls up or down the character button display. [QWE]/ [ABC] Sets the key layout of the character buttons. ABC : Alphabetical key layout. QWE : Qwerty key layout. [Clear] Clears the character.
Screen Control Setting the monitor screen. Screen Control 1 Display the Easy Control Screen See (page 17). 2 Display the Screen Control Screen "NAV-SYNC": Turning the Dimmer function On or Off according to the Navigation Day/Night display setting. [Mode] Selects a screen mode. You can select any of the following screen mode. "Full", "Just", "Zoom", "Normal" ⁄ • The Screen Control screen is displayed only when you have applied the parking brake.
Hands-Free Phoning Various functions can be used in the Hands Free control mode. 42 Before Use Downloading the Phonebook • You need to register your cell-phone before using it with this unit. For more details, see (page 66). • If you have registered two or more cell-phones, you need to select one of them. For more details, see (page 68). • To use the Phone Book, it must be downloaded to this unit in advance.
Receiving a Call [ [ ] Answering a Phone Call ] Rejecting an Incoming Call Call Waiting [ ⁄ • While monitoring the rear view camera, this screen is not displayed even a call comes in. To display this screen, press the [TEL] button or return the shift knob of car to the drive position. During a Call [ ] • Answering another incoming call with the current call suspended • Switching between the current call and waiting call Each touch of this button switches the calling party.
Hands-Free Phoning Making a Call Displaying the control screen and using various functions. 1 Display the Hands-Free Control screen TEL AV OUT 2 Select a dialing method 1 [Voice] Starts voice recognition. See (page 46). [BT SETUP] Displays the Bluetooth SETUP screen. See (page 66). [TEL SETUP] Displays the Hands Free Setup screen. See (page 48).
Calling by Phonebook Calling by Entering a Phone Number You can call a person using his/her phone number that you have registered in the Phonebook. Makes a call by entering a phone number. 1 Display the Hands-Free Control screen See (page 44). 1 Display the Hands-Free Control screen See (page 44).
Hands-Free Phoning Making a Call Using Call Records Calling by Voice Recognition Calls by selecting a phone number from the outgoing, incoming, or missed calls list. Calls by recognizing the registered voice. 1 Display the Hands-Free Control screen • In order to perform voice recognition, voice must be registered in the Phonebook data. See (page 49). Or, to perform voice recognition by Phone number category (Home, Office, Mobile etc.
7 If there are more than one phone numbers assigned under the registered name 5 Say the key word registered for the category Controlling Tone-based Services Uses tone base service using DTMF (Dual Tone Multi Frequency). 1 Display the Talking screen See (page 45). 2 Display the DTMF input screen When a beep is heard, say the key word within 2 seconds.
Hands-Free Phoning Setting Up the Hands-Free Phone The Hands-Free system can be set as follows. 1 Display the Hands-Free Control screen See (page 44). 2 Display the Hands Free Setup screen 3 Set each item [SMS Receive Beep] Sets the beep of the incoming SMS. ( "ON") "ON": Beep is heard. "OFF": Beep is canceled. [Phone Information Use] Sets whether to use cell-phone phonebook, outgoing calls list, incoming calls list and missed calls list. ( "ON") "ON": Yes. "OFF": No.
Voice Registration 6 End voice registration Registers voice for voice recognition in Phonebook. Up to 35 voices can be recorded in one cell-phone. 1 Display the Phonebook Detail screen Go through the procedure of (page 45). 2 Select the name to register 1 ⁄ • A message is displayed if the voice is not recognized. Read the message for the further operation. • Repeat from 1st try if the voice is different from the 1st try. 1 Selects a name.
Hands-Free Phoning Key Word Voice Registration Registers the voice to select the Phone number category by Voice Recognition. 6 Say the phone category to register (2nd try) Say within 2 seconds after the Beep. 7 End voice registration 1 Display the Hands Free Setup screen See (page 48). 2 Display the Key Word List screen ⁄ • A message is displayed if the voice is not recognized. Read the message for the further operation.
Phone Number Preset 5 Register phone number Registers frequently used phone number to Hands Free control screen preset button. 1 Display the Hands-Free Control screen See (page 44). 2 Select the Preset number to register 1 sec. ⁄ • If no Preset number is registered, pressing this button momentarily moves to the step 3. 3 Select the search destination of the number to register [ ] Registers from SMS received message list. [ ] Registers from SMS sent message list.
Hands-Free Phoning SMS (Short Message Service) Uses SMS function. SMS Message screen 1 Display the Hands-Free Control screen See (page 44). 2 Display the SMS Select screen [ SMS] Creates a new message for the selected message. 3 Select a function [ ] Displays the SMS create menu screen. See . [ ] Displays received message list. [ ] Displays sent message list. [ ] Displays the SMS Create Menu screen. See .
Create a message 4 Send the message 1 Enter phone number / Select contact [ ] Select a contact from the phonebook. [Direct Number] Enter the phone number. [SET] Display the Create SMS Message screen. [Send] Sends the message. [Delete] Deletes the Draft message. Touching the screen displays a confirmation message. Touch [Yes]. To cancel clearing, touch [No]. 2 Display the Create SMS Message screen 3 Create a message 1 1 Enters characters. [2], [3] Moves the cursor.
Audio Control Audio Control Menu Audio Control Displays the Audio Control menu to set the sound effect function of this unit. You can adjust the front/rear and right/left audio balance. 1 Display the Source Select Screen 1 Display the Audio Control screen Touch [ ]>[ ] > [Audio Control]. (page 54) 2 Set each item SRC 1 2 Display the Audio Control menu In this manual, the above selection is indicated as: Touch [ ] > [ ].
Equalizer Control Tone Setup You can set up the equalizer. You can set a Tone curve. 1 Display the Equalizer screen 1 Display the Equalizer screen Touch [ ]>[ ] > [Equalizer]. (page 54) 2 Set each item Touch [ ]>[ ] > [Equalizer]. (page 54) 2 Display the Tone Control screen 3 Set the Tone [SystemQ] Selects an equalizer curve type. You can select any of the following equalizer curves. "Natural"/ "Rock"/ "Pop"/ "Easy"/ "Top40"/ "Jazz"/ "User" ⁄ • "User": Your own tone curve can be created.
Audio Control Zone Control You can set the front and rear audio source. 1 Display the Zone Control screen Touch [ ]>[ ] > [Zone Control]. (page 54) 2 Set the Zone Control [Single Zone] Sets the unit to single zone. [Dual Zone] Sets the unit to dual zone. [Front Source] Sets the front audio source. [Rear Source] Sets the rear audio source. ⁄ • When the rear speaker sound is switched, the audio source that is output at the AV OUTPUT terminal is also switched to the same source. [Rear VOL.
Setup Menu You can set up various receiver parameters. How to Display SETUP Menu Screen Displays the Setup menu to set various functions. 1 Display the Source Select Screen SRC 2 Display the Setup Menu Screen In this manual, the above selection is indicated as: Touch [ ] > [ ].
Setup Menu DivX Setup Software Information Checks the registration code. This code is needed when making a disc which has DRM (Digital Rights Management). Checks the software version of this unit. 1 Display the DivX Setup screen Touch [ ]>[ (page 57) 1 Display the Software Information screen Touch [ ]>[ ] > [Information] > [Software]. (page 57) ] > [Information] > [DivX]. Displays the software version. Displays the registration code.
User Interface You can setup user interface parameters. 1 Display the User Interface screen Touch [ ]>[ ] > [System] > [User Interface]. (page 57) 2 Set each item [FNC Key Longer than 1 Second] Sets the function of the [FNC] button. ( "V.OFF") "V.OFF" : Press the [FNC] button for more than 1 second to turn the display off. "R-CAM" : Press the [FNC] button for more than 1 second to switch to rear view. [Animation] Sets whether to display animation.
Setup Menu Language Setting When [Select Mode] is set to "Advanced" You can select the display language for the control screen and audio file tags. 1 Display the User Interface screen Touch [ ]>[ ] > [System] > [User Interface]. (page 57) [Navigation Language Select] Selects the language used for navigation. ( "British English") 2 Display the Language Setting screen 3 Select a language [Select Mode] Selects language select mode.
Touch Panel Adjustment Clock Setup You can adjust the touch panel operations. You can adjust the clock time. 1 Display the Touch panel Adjustment screen 1 Display the Clock Setup screen Touch [ ]>[ (page 57) ] > [System] > [Touch]. 2 Adjust the Touch panel Touch [ ]>[ (page 57) 2 Setup the Clock 1 Follow the instruction on the screen and touch the center of . [Cancel] Cancels the adjustment and returns to the Touch Panel Adjust screen. [Reset] Resets to the initial status. ] > [System] > [Clock].
Setup Menu Security Setup 5 Register your security code You can set a security code to protect your receiver system against theft. ⁄ 6 Reenter the security code • When the Security Code function is activated, the code cannot be changed and the function cannot be released. Note the Security Code can be set as the 4 digit number of your choice. 1 Display the Security screen Touch [ ] > [ (page 57) ] > [System] > [Security].
Setup Memory Audio Control, AV-IN SETUP, AV Interface, Navigation, and Audio SETUP settings can be memorized. The memorized settings can be recalled at any time. For example, even when the settings are cleared due to replacement of the battery, the settings can be restored. 1 Display the SETUP Memory screen Touch [ ]>[ ] > [System] > [SETUP Memory].
Setup Menu Entering Background 6 Load the image Loads a image from the connected USB device and sets it for the background image. 1 Connect the device which has the image to load 1 2 Display the Background screen Touch [ ]>[ ] > [Display] > [Background]. (page 57) 3 Display the Background Memory screen [Change] Selects a image for background. [Delete] Deletes the background image. Touching the screen displays a confirmation message. Touch [Yes]. To cancel clearing, touch [No]. 1 Rotates the image.
Panel Color Coordinate To register your original color Sets the button illumination color. 1 Start the RGB coordinate 1 Display the Color screen Touch [ ]>[ (page 57) ] > [Display] > [Color]. 2 Adjust each color value 2 Display the Panel Color Coordinate screen 1 [Initialize] Initialization resets the settings made using the Panel Color to the default settings made at the factory. [Panel Color Scan] When set to "ON", the illumination color of the buttons changes one after another.
Setup Menu Screen Adjustment Registering Bluetooth Unit You can adjust the screen mode of the monitor. Registers the Bluetooth unit to be connected. 1 Display the Screen Adjust screen 1 Display the Bluetooth Setup screen Touch [ ]>[ Adjust]. (page 57) ] > [Display] > [Screen 2 Set each item [Bright] Brightness Control [Contrast] Contrast Control [Black] Black Level Adjustment [Dimmer] Dimmer Mode Setup "ON": The display dims. "OFF": The display doesn’t dim.
4 Select the Bluetooth unit to register 1 Registering Special Bluetooth Unit Registers Special Bluetooth unit, that resulted in error by normal registration method, by selecting from the listed models. 1 Display the Special Device List screen 1 Displays the searched Bluetooth unit. [Search] Searches for a Bluetooth unit. [Cancel] Cancels searching of Bluetooth unit. 2 Select a model name 5 Enter PIN code 1 Displays the Bluetooth unit name that can be registered.
Setup Menu Registering Bluetooth Unit PIN Code Bluetooth Unit Connection Sets the PIN code of the Bluetooth unit to enter when registering (pairing) from the cell-phone or audio player side. Selects the Bluetooth unit to connect. 1 Display the Bluetooth Setup screen Touch [ ]>[ (page 57) ] > [Bluetooth SETUP]. 1 Display the Bluetooth Setup screen Touch [ ]>[ (page 57) ] > [Bluetooth SETUP].
Bluetooth Hands-Free/Audio Output Setup Selects speakers to output the sound of handsfree phoning (such as phone call voice and ringing tone). 1 Display the Bluetooth Setup screen ]>[ Touch [ (page 57) AV Input Setup You can set AV input parameters. 1 Display the AV-IN Setup screen Touch [ ]>[ ] > [AV-IN SETUP]. (page 57) 2 Set each item ] > [Bluetooth SETUP]. [Bluetooth HF/Audio] Sets the output speakers. ( "Front Only") "Front Only" : Outputs from the front speakers.
Setup Menu AV Interface Setup Navigation Setup You can set audio and visual (AV) interface parameters. You can set Navigation parameters. 1 Display the AV Interface screen Touch [ ]>[ ] > [AV Interface]. (page 57) 1 Display the Navigation Setup screen Touch [ ]>[ ] > [Navigation]. (page 57) 2 Set each item 2 Set each item [AV-OUT] Selects an AV source to be output at the AV OUTPUT port. ( "AV-IN1") [R-CAM Interrupt] Sets a method to switch to the rear view camera video display.
Speaker Setup You can select a speaker type and its size to get the best sound effects. Crossover Network Setup You can set a crossover frequency of speakers. 1 Select the speaker to set the crossover 1 Display the Speaker Select screen Touch [ ]>[ ] > [Audio SETUP] > [Speaker Select]. (page 57) 2 Select a speaker you wish to adjust When the speaker type and size are set, the speaker crossover network and equalizer curve are set automatically. 1 1 2 3 1 Sets the High Pass Filter of the front speaker.
Setup Menu DVD Setup You can set up the DVD play. 1 Display the DVD Setup screen Touch [ ]>[ ] > [DVD SETUP]. (page 57) 2 Set each item [Screen Ratio]* Selects the screen display mode. ( "16:9") "16:9": Displays wide pictures. "4:3 LB": Displays wide pictures in the Letter Box format (having black stripes at the top and bottom of screen). "4:3 PS": Displays wide pictures in the Pan & Scan format (showing pictures cut at the right and left ends). [Parental Level]* Displays the Parental Lock screen.
DVD Language Setup DVD Parental Level Setup Selects a language you use for the speech and menus. Sets a parental level. 1 Display the DVD Setup screen Touch [ ]>[ ] > [DVD SETUP]. (page 57) 2 Select the language item to set 1 Display the DVD Setup screen ]>[ Touch [ ] > [DVD SETUP]. (page 57) 2 Display the Parental Level code number screen 3 Enter a language code See (page 79) and select the desired language. 3 Enter the code number 1 1 1 Enters a language code.
Setup Menu 5 Select a parental level and complete the setup Disc Setup Performs setup when using disc media. 1 Display the DVD Setup screen Touch [ ]>[ ] > [DVD SETUP]. (page 57) 2 Display the Disc Setup screen Selects a parental level. ⁄ • If a disc has higher parental lock level, you need to enter the code number. • The parental lock level varies depending on a loaded disc. • If a disc has no parental lock, anybody can play it back even when you have set the parental lock.
USB Setup iPod Setup Performs setup when using USB. Performs setup when using iPod. 1 Display the USB Setup screen 1 Display the iPod Setup screen Touch [ ]>[ ] > [USB SETUP]. (page 57) 2 Set each item [Picture Display Time] Selects a picture display time. ( "Long") The Display of a JPEG picture is changed. ("Short", "Middle", "Long") [On Screen USB] Sets an on-screen display of the USB Playback screen. ( "Auto") "Auto": Information is displayed for 5 seconds when updated.
Setup Menu Tuner Setup TV Setup You can set Tuner related parameters. The TV signal receiving areas can be set. 1 Display the Tuner Setup screen 1 Display the TV SETUP screen Touch [ 57) ]>[ ] > [TUNER SETUP]. (page Touch [ ]>[ ] > [TV SETUP]. (page 57) 2 Set each item 2 Set each item [NEWS] Sets a news bulletin interrupt time. ( "OFF") [AF] When station reception is poor, automatically switches to the station that is broadcasting the same program over the same RDS network.
Initial Setup When pressing the Reset button or turning on the unit for the first time, the Initial SETUP screen is displayed. Initial Setup 1 Turn the power On 2 Set each item [Language] Select the language used for the control screen and setting items. (page 60) [iPod AV Interface Use] Sets the terminal to which the iPod is connected to. ( "iPod") [R-CAM Interrupt] Sets a method to switch to the rear view camera video display.
Status bar Indicator items Shown below is a list of indicators displayed on the Status bar. Source Display Overview USB iPod Source Display Overview General Indicates that the attenuator is active. Turns on the Dual zone function. Indicates the connection state of the Bluetooth hands-free unit. (Orange: Connected. White: Not connected.) DVD/CD "FO-REP" Indicates that the Folder repeat function is ON. MEDIA "IN" Indicates that a disc is inserted. (White: A Disc is inside the unit.
DVD Language Codes Code Language Code Language Code Language aa ab af am ar as ay az ba be bg bh bi bn bo br ca co cs cy da de dz el en eo es et eu fa fi fj fo fr fy ga gd gli gn gu ha he hi hr hu hy ia ie ik id Afar Abkhazian Afrikaans Amharic Arabic Assamese Aymara Azerbaijani Bashkir Byelorussian Bulgarian Bihari Bislama Bengali, Bangla Tibetan Breton Catalan Corsican Czech Welsh Danish German Bhutani Greek English Esperanto Spanish Estonian Basque Persian Finnish Fiji Faroese French Frisian Irish
Help? Troubleshooting Some functions of this unit may be disabled by some settings made on this unit. ! • Cannot set up the subwoofer. • Cannot set up subwoofer phase. • No output from the subwoofer. • Cannot set up the low pass filter. • Cannot set up the high pass filter. ▲ Subwoofer is not set to On. ☞ (page 71) ▲ The Dual zone function is enabled. ☞ (page 56) ▲ The unit is set to STANDBY source. ! • Cannot select the output destination of the subsource in the Dual zone.
Help? Error When the unit fails to operate correctly, the cause of the failure appears on the display. "Protect" : Protective circuit has been activated because a speaker cord has shorted or it has come in contact with the car chassis. ➡ Wire or insulate the speaker cord as appropriate and then push the Reset button. "Hot Error" : When the internal temperature of this unit rises to 60°C or more, the protection circuit is activated and you may not be able to operate the unit.
Specifications Monitor section USB interface section Picture Size : 7 inches (diagonal) wide : 156.6 mm (W) x 81.6 mm (H) Display System : Transparent TN LCD panel Drive System : TFT active matrix system Number of Pixels : 1,152,000 (800H x 480V x RGB) Effective Pixels : 99.99 % Pixel Arrangement : RGB striped arrangement Back Lighting : LED USB Standard : USB 2.
FM tuner section Video section Frequency Range 50 kHz : 87.5 MHz – 108.0 MHz Usable Sensitivity (S/N : 26 dB) : 0.7 μV/ 50 Ω Quieting Sensitivity (S/N : 46 dB) : 1.6 μV/ 75 Ω Frequency Response (± 3.
Specifications Navigation section Receiver : High-sensitivity GPS receiver Reception Frequency : 1575.42 MHz (C/A code) Acquisition Times Cold : < 38 seconds Factory Reset : < 45 seconds (On average for a stationary receiver with a clear view of the sky) Accuracy Position : < 10 meters typical Velocity : 0.05 m/sec. RMS Position Method : GPS Antenna : External GPS antenna General Operating voltage : 14.4 V (10.
The "AAC" logo is a trademark of Dolby Laboratories. Font for this product is designed by Ricoh. iPod is a trademark of Apple Inc., registered in the U.S. and other countries. iPhone is a trademark of Apple Inc. iTunes is a trademark of Apple Inc. “Made for iPod” means that an electronic accessory has been designed to connect specifically to iPod and has been certified by the developer to meet Apple performance standards.
· Declaration of Conformity with regard to the EMC Directive 2004/108/EC · Declaration of Conformity with regard to the R&TTE Directive 1999/5/EC Manufacturer: Kenwood Corporation 2967-3 Ishikawa-machi, Hachioji-shi, Tokyo, 192-8525 Japan EU Representative's: Kenwood Electronics Europe BV Amsterdamseweg 37, 1422 AC UITHOORN, The Netherlands English Hereby, Kenwood declares that this unit DNX520VBT is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
Information on Disposal of Old Electrical and Electronic Equipment and Batteries (applicable for EU countries that have adopted separate waste collection systems) Products and batteries with the symbol (crossed-out wheeled bin) cannot be disposed as household waste. Old electrical and electronic equipment and batteries should be recycled at a facility capable of handling these items and their waste byproducts. Contact your local authority for details in locating a recycle facility nearest to you.
B64-4644-00_00_VW_E_En.indd 88 09.12.