User's Manual

MGR-E8 12
Names and functions of parts
~ REC button
Press to enter recording standby
mode. Press again to start
recording.
Press during recording to enter
recording pause mode. Press
again to resume recording.
Rec indicated by the indicator
Steady lighting Recording mode
Blink Recording standby or
Recording pause mode
Extinguished Stop mode
! EDIT button
Press during stop mode or while
the list is displayed to open the
file edit screen.
Press during playback to add/
delete favorite tracks or set A-B
repeat.
Press during recording standby
to set the AUTO recording level
adjustment.
Press during recording to divide
the recorded file at the point
where the button is pressed.
@
Volume button
Press to increase (5) or decrease
() the volume. Pressing and
holding a button segment varies
the volume gradually.
# Strap eyelet
Pass the strap through this hole.
CAUTION
Do not pass a metallic hook or
like (a key holder, etc.) through
the strap eyelet. Otherwise, this
unit may be damaged.
Do not swing around the unit by
holding the strap. If the unit hits
a person, an injury, malfunction
or damage may result.
$ LINE OUT Line output
%
Phones jack
^ MIC Microphone input
& LINE IN Line input
* HOLD switch
ALL : Press to defeat all other
buttons. This helps prevent
erroneous operation of this unit
when it is carried in a bag, etc.
REC : Press to defeat only the
REC button. This prevents
unintended recording mistake
during playback of music, etc.
( Speaker
When nothing is connected to
[$ LINE OUT] terminal and [%
] Phones jack, the speaker
output the audio of the track
being played.
The speaker does not output any
audio during recording.
B60-5825-08_00_MGR-E8(E)_English_1AJ6P1P0109--(XE0).indd 12B60-5825-08_00_MGR-E8(E)_English_1AJ6P1P0109--(XE0).indd 12 10/08/04 13:4810/08/04 13:48