User's Manual

• Connection for analog recording
Use the separately sold AID converter (BP-A7).
• Turn off the power to both the amplifier and this unit before making connections.
• Connect the AID converter unit (supplied in the BP-A71 to this unit.
• Connect the AID converter unit's [MIC/LINE IN] jack to
an amplifier's [TAPE REC] jacks or a
stereo microphone.
• Connect the AID converter unit's [LINE OUT] jack to an amplifier's external input jacks (AU X
jacks,
TAPE PLAY jacks, etc.).
Both input and output connections should
be made with the red plug connected to the amplifi-
er's
"R" (right channell jack and the white plug connected to the "L" (left channell jack.
•
Use the AID converter unit's [MIC/LlNE] switch to MIC or LINE, depending on the connection.
• Adjust the playback sound volume using the amplifier's volume control.
• When using a microphone, use a stereo microphone equipped with a 3.5 mm diameter stereo
miniplug.
If you use a monaural microphone, the sound will be recorded on the left channel only.
REC ouT PLAY BACK
1i:J\ @@
r~H-I------d
Stereo microphone
~~hite
~ .. _=:J J
~ ~~'\~ MIG/LINE IN -====")
Separately sold BP-A 7
DX-7 13