User's Manual

" -,
u~,
I Display example
When the tape
is stopped at
the beginning
When
the tape
is stopped at
the end
r
end
• When the beginning of the displayed tune
is reached, " ~ " appears on the display
and playback begins.
• If the [PAUSE] button is pressed during the
skip operation, the unit enters
pause mode
at the beginning of the designated tune.
16 DX-7
• To fast-forward or rewind
the tape
• In stop mode, press the [FF/CUE] button
to fast-forward the tape and press the
[REW/REVIEWl button to rewind the tape.
• Auto Rewind function:
When the last tune
on the tape finishes
playing, the tape automatically rewinds to
the beginning and then stops.
The same operation occurs even if
an
END-ID is recorded. (See page 23.)
• To skip to a desired tune
(DPSS function)
By pressing the IFF/CUE] or IREW/REVIEW]
button one or more times, you can skip to
a subsequent or previous tune correspond-
ing to the number of presses.
• During playback, pressing the [FF/CUE]
button once skips to the beginning
of the
next tune.
• During playback, pressing the [REW/
REVIEW] button once skips to the begin-
ning
of the current tune.
The unit skips to a designated tune by
searching for the tune's
ST-ID recorded
in
the subcode area. If the ST-ID is not
recorded on the tape, therefore, skipping
cannot be carried out.
If pressed again while the "
~ " indicator
is blinking, the unit skips to a tune located
even further in the skip direction.