User's Manual

Digital recording
First load a tape into the unit (see page 14).
Operation is possible with either the main unit or the remote controller.
""
LILI
~II .-
11.1111
U'LILI
rl I ST·ID mill •
LI
I
11.11 -,
ULI :J
18 DX-7
Connect the unit (See page
11.)
• Press the [REC] button.
When starting recording from the begin-
ning of the
tape, the unit automatically cre-
ates a 5-second blank section and then
enters record-standby mode.
•
Press the [PLAY/REPEAT] button to start
recording.
You can also start recording by pressing
the [PAUSE] button.
• To stop recording, refer
to page 20.
• Changing the [VOLUME] level during
recording has no effect on the recorded
sound.
• If five seconds elapse after the
[REC] but-
ton is pressed, the rotating head moves
away from the tape
to protect the tape.
(The
REC indicator blinks.)
• A ST-ID
is automatically recorded at the
start of each tune.
(See page 23.)
• When carrying out digital recording from
another DAT deck using a tape recorded
with ST-IDs and SKIP-IDs, the same sub-
codes are recorded on the
new tape.