User's Manual

Stopping/pausing recording
• Operation is possible with either the main unit or the remote controller.
• Erasing a recording
• To pause recording
• Press the [PAUSE] button.
If five minutes elapse
in pause mode, the
rotating head moves away from the tape
to protect the tape. (The REC indicator
blinks.1
• To stop without recording
an END-ID (See page 26)
• Press the [STOP/EJECT] button or press
the remote controller's [STOP] button .
• To stop after recording an
END-ID (See page 26)
• During recording, press the [FF/CUE] but-
ton for at least
two seconds. (After the
EN D-I D is recorded for nine seconds, the
unit enters stop mode.1
• To erase a tape, set the unit to record mode
with nothing connected to the [DIGITAL I/O] jack.
•
Do not attach the separately sold AID converter unit.
20 DX-7