KRF-V7020/V6020/V5020 (En/T) 1 KRF-V7020 KRF-V6020 KRF-V5020 Preparation AUDIO VIDEO SURROUND RECEIVER INSTRUCTION MANUAL This instruction manual is for some models. Model availability and features (functions) may differ depending on the country and sales area. Operations KENWOOD CORPORATION B60-4155-00 02 MA (T,E2,Q) OC 9809 Remote Control Compared to standard remote controls, the remote control supplied with this receiver has several operation modes.
Getting started Caution : Read this page carefully to ensure safe operation. KRF-V7020/V6020/V5020 (En/T) Before applying the power 2 Units are designed for operation as follows. U.K. and Europe ............................................... AC 230 V only Russia ............................................................... AC 220 V only For the United Kingdom Preparations Factory fitted moulded mains plug 1. The mains plug contains a fuse.
Getting started KRF-V7020/V6020/V5020 (En/T) Contents Caution : Read the pages marked safe operation. carefully to ensure 3 Before applying the power .................................. 2 Safety precautions ............................................... 2 Unpacking ............................................................ 2 How to use this manual ........................................ 4 Special features ................................................... 4 Names and functions of parts ............
Getting started How to use this manual Special features The manual covers the KRF-V7020, KRF-V6020, and KRF-V5020. Items such as functions, number of jacks, and remote control details differ somewhat between these models. To confirm the functions available on the model you have purchased, refer to the table below.
Names and functions of parts KRF-V7020/V6020/V5020 (En/T) TI.VOL indicator Speaker indicator MUTE indicator S.DIRECT indicator Band indicators SP SP AUTO indicator A B TI.VOL L MUTE RDS EON PTY LS TP TA NEWS R C SW S RS * **** *;** kHz DOWNMIX DSP ST. indicator ST. TUNED TUNED indicator MONITOR indicator DSP indicator 3 STEREO indicator STEREO indicator Display 3 MEMO. indicator AM PRO LOGIC S.DIRECT MEMO.
Names and functions of parts KRF-V7020/V6020/V5020 (En/T) Remote control unit (RC-R0508) 6 1 POWER MACRO 2 Preparations 3 AUDIO VIDEO P. CALL 4 SHIFT TV 8 0 ! @ P. CALL BAND 4 6 ¢ 7 5 REC GUIDE TUNING/SKIP MUTE 6 7 8 Page references such as “RC0” indicate pages in the remote control operation manual (Separate booklet). 1 POWER key @ Use to turn the receiver on and off.
Names and functions of parts KRF-V7020/V6020/V5020 (En/T) Remote control unit (RC-R0710) 2 3 4 5 6 1 2 3 POWER 4 5 6 0 7 8 9 +10 2 6 7 DISC SKIP BAND 1 TUNING ¡ LISTEN MODE TITLE SOUND SUB TITLE PTY MD/TAPE 7 DVD CONT AUTO A/B +100 4 P.CALL ¢ MULTI CONTROL VOL.UP S.DIRECT MENU MUTE ENTER SET UP OSD VOL.
Setting up the system KRF-V7020/V6020/V5020 (En/T) 8 Make connections as shown below. When connecting the related system components, be sure to also refer to the instruction manuals supplied with the components you are connecting. Do not connect the power cord to a wall outlet until all connections are completed. Connecting audio components Shape of AC outlets For U.K.
Setting up the system KRF-V7020/V6020/V5020 (En/T) Connecting video components Even if your DVD player does not have the 6-channel output facility, you can enjoy the 6-channel audio by connecting a multi-channel surround processor to your DVD player. 9 6CH. INPUT VIDEO 1 SUB WOOFER VIDEO 2 Preparations CENTER VIDEO 1 SUB WOOFER REC OUT PLAY IN MONITOR VIDEO 2 CENTER MONITOR PLAY IN FRONT SURROUND DVD 6CH. INPUT FRONT VIDEO 2 / MONITOR VIDEO 1 SURROUND DVD 6CH.
Setting up the system KRF-V7020/V6020/V5020 (En/T) 10 Connecting the system control Connecting system control cords after connecting a KENWOOD audio component system lets you take advantage of convenient system control operations. There are two KENWOOD system control modes. Make connections according to the groups of terminal symbols shown below. ƒ Preparations Mode : lets you combine f, ƒ, and Mode : for terminals only F terminals This unit is compatible with both [XS8] and [SL16] modes.
Setting up the system KRF-V7020/V6020/V5020 (En/T) Connecting the speakers 11 2 Loosen. 3 Insert. 4 Secure. 1 Strip coating. 2 Push lever. 3 Insert cord. 4 Return lever. Preparations 1 Strip coating. • Never short circuit the + and – speaker cords. • If the left and right speakers are connected inversely or the speaker cords are connected with reversed polarity, the sound will be unnatural with ambiguous acoustic imaging. Be sure to connect the speakers correctly.
Setting up the system KRF-V7020/V6020/V5020 (En/T) Preparing the remote control (RC-R0508) 12 Speaker placement Loading the batteries 2 Insert the batteries. 1 Remove the cover. Center speaker Preparations Subwoofer Front speaker Surround speaker 3 Close the cover. Listening position Front speakers : Place to the front left and right of the listening position. Front speakers are required for all surround modes. Center speaker : Place front and center.
Setting up the system Preparing for surround sound KRF-V7020/V6020/V5020 (En/T) Preparing the remote control (RC-R0710) Loading the batteries 2 Insert the batteries. 13 To enable you to obtain optimum enjoyment from the receiver’s listening modes, make sure to complete the speaker settings as described below. SETUP MULTI CONTROL Preparations 1 Remove the cover. Speaker settings 3 Close the cover.
Preparing for surround sound Normal playback KRF-V7020/V6020/V5020 (En/T) 14 Preparing for playback 3 Adjust the volume levels for the speakers. Sit in your normal listening position and listen to the test tone. Adjust the volume levels for the speakers until all speakers seem to be equally loud. Some preparatory steps are needed before starting playback.
Normal playback KRF-V7020/V6020/V5020 (En/T) Adjusting the sound Listening to a source component VOLUME CONTROL INPUT SELECTOR VIDEO 15 VOLUME CONTROL SOURCE DIRECT BASS BOOST SOUND MULTI CONTROL PHONES SPEAKERS A/B SPEAKERS, MUTE (KRF-V5020) AUDIO VOLUME VIDEO VOLUME Input selector keys RC-R0508 RC-R0710 VOLUME MUTE VOLUME TUNING/SKIP MUTE SOUND MULTI CONTROL SOUND 1 Use the input selector (INPUT SELECTOR (AUDIO, VIDEO)) RC-R0508 RC-R0710 The input sources change as shown below: Selecting
Normal playback Recording KRF-V7020/V6020/V5020 (En/T) Recording audio 16 VIDEO 2 / MONITOR Muting the sound MUTE lets you mute the sound of the speakers. Press the MUTE key. SP A R L MUTE SW Blinks CD INPUT SELECTOR • On the KRF-V5020, this selection can be made using the control on the receiver as well. To cancel Press the MUTE key again so that the “MUTE” indicator goes off. • Muting can also be cancelled by adjusting the volume.
Listening to radio broadcasts KRF-V7020/V6020/V5020 (En/T) Tuning (non-RDS) radio stations Using RDS (Radio Data System) Radio stations can be classified into RDS (Radio Data System) stations and other stations. To listen to or store RDS stations in the preset memory, see the section entitled, "Using RDS". AUTO BAND 17 RDS is a system that transmits useful information (in the form of digital data) for FM broadcasts along with the broadcast signal.
Listening to radio broadcasts KRF-V7020/V6020/V5020 (En/T) 18 Using the DISPLAY key Presetting RDS stations (RDS AUTO MEMORY) This function automatically stores up to 30 RDS stations in the preset memory. In order to use the EON and PTY functions, the RDS stations must be stored in the preset memory using the RDS AUTO MEMORY function. MEMORY BAND DISPLAY INPUT SELECTOR DISPLAY 1 Use the input selector to select the tuner. 2 Use the BAND key to set the broadcast band to “FM”.
Listening to radio broadcasts KRF-V7020/V6020/V5020 (En/T) Presetting radio stations manually The RDS auto memory function assigns preset numbers to RDS stations starting from preset number "1". Therefore, be sure to execute the RDS auto memory function before using the following operations to manually store AM stations and other FM stations, and RDS stations. “Presetting RDS stations (RDS AUTO MEMORY)”. * MEMORY 2 Enter the number of the preset you want to receive (up to 19 "30").
Listening to radio broadcasts KRF-V7020/V6020/V5020 (En/T) 20 Tuning by program type (PTY search) This function lets you set the tuner to automatically search for stations which are currently broadcasting the type of program (genre) you want to listen to. Under certain receiving conditions, it may take more than 1 minute to complete the search. PTY “NO PROG” is displayed if this operation is attempted before performing the RDS Auto Memory operation. 3 Press the PTY key to start searching.
Listening to radio broadcasts KRF-V7020/V6020/V5020 (En/T) 21 1 Complete steps 1~3 of "Presetting RDS stations (RDS * AUTO MEMORY)". Skip this step if you have already completed the RDS AUTO MEMORY procedure. • The EON function will not work if all 30 FM preset stations were stored manually using the procedure shown in “Presetting radio stations manually”. Be sure to use the RDS automatic memory function. of your choice.
Ambience effects KRF-V7020/V6020/V5020 (En/T) 22 This receiver is equipped with listening modes that allow you to enjoy an enhanced sonic ambience with a variety of video sources. In order to obtain the optimum effect from the surround modes, make sure to input the proper speaker settings beforehand. # DSP mode The DSP mode lets you add the atmosphere of a live concert or hall to almost any type of program source.
Ambience effects KRF-V7020/V6020/V5020 (En/T) Surround Play DVD 6-channel playback DOLBY PRO LOGIC and DOLBY 3 STEREO can be used when playing video, DVD, or LD software bearing the mark. DSP modes can be used with any source. 23 Using a DVD player or the like equipped with six (5.1) output channels and the receiver, you can enjoy surround sound playback. When you try to play a disc other than Dolby Digital (AC-3) such as DTS CD, no sound is produced or, noise may be heard.
Ambience effects KRF-V7020/V6020/V5020 (En/T) 24 Convenient functions DISPLAY MULTI CONTROL SUBWOOFER adjustment (RC-R0508 only) It is easy to adjust the volume of the subwoofer using the remote control (RC-R0508). 1 Press the SUBWOOFER key so that “SW” is displayed. SP AB L C R LFE SW LS S RS SOUND sW ) dB AUTO SOUND DIGITAL AUTO PRO LOGIC MEMO. ST. TUNED 2 Use the VOLUME key to adjust the volume. • The adjustable range is -10 dB to +10 dB.
In case of difficulty KRF-V7020/V6020/V5020 (En/T) Resetting the Microcomputer 25 If the microcomputer may malfunction (unit cannot be operated, or shows an erroneous display) if the power cord is unplugged while the power is ON, or due to some other external factor. If this happens, execute the following procedure to reset the microcomputer and return the unit to its normal operating condition. With the power cord plugged in, turn the POWER key OFF.
In case of difficulty KRF-V7020/V6020/V5020 (En/T) Remote control unit 26 Symptom Cause Remedy Remote control operation is not possible. • Batteries are exhausted. • The remote control unit is too far away from the main system, controlling angle is too large, or there is an obstacle between the receiver and the remote. • The audio cords and system control cords are not connected properly. • No software is loaded in the source component.
Specifications Caution : Read this page carefully to ensure safe operation. KRF-V7020/V6020/V5020 (En/T) AUDIO section VIDEO section Rated power output during STEREO operation KRF-V7020 (DIN) 1 kHz, 0.7% at 4 Ω .......................................... 100 W + 100 W KRF-V6020, KRF-V5020 (DIN) 1 kHz, 0.7% at 4 Ω ............................................... 80 W + 80 W Effective power output during SURROUND operation KRF-V7020 FRONT (1kHz, 0.7% T.H.D. at 4 Ω one channel driven) .......................
For your records Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your dealer for information or service on this product.