User's Manual

Preparations

Basic section

Application section

Knowledge section

Option settings for external recording

Setting D.EQ RecMode (digital equalizer recording mode)

1 Press the MODE key, turn the INPUT SEL./

MULTI CONTROL knob to select “D.EQ

RecMode”. Then press the SET key.

2 Turn the INPUT SEL./MULTI CONTROL

knob to select “D.EQ ON” or "D.EQ OFF".

Then press the SET key.

"DIGITAL EQ REC": The sound is recorded with

the MANUAL EQ settings. ª

Switching as shown below is done each time the

knob is turned.

"D.EQ ON" :

The digital equalizer effect is reflected

in the recorded sound.

"D.EQ OFF" : The digital equalizer effect is not re-

flected in the recorded sound. (Initial

setting)

÷ The settings for D-Bass, TONE, and ROOM

EQ do not influence the recording.

In order to prevent clipping of the digital signal, record-

ing is done with a slightly lower volume. It is possible to

adjust the recording level so that no clipping is done,

while looking at the level meter. (Setting the record-

ing level)

Setting the recording level

1 Set the recording pause condition.

2 Press the MODE key, turn the INPUT SEL./

MULTI CONTROL knob to select “REC

LEVEL”. Then press the SET key.

3 Turn the INPUT SEL./MULTI CONTROL

knob to adjust the recording level. Then

press the SET key.

The level can be adjusted in the range from -8 to +6.

The actual recording level can be confirmed at the level

meter.

*5613/46-51/EN 06.1.6, 0:54 PM51