User's Manual

English
|
11
Wide View Guideline Adjustment
(Horizontal Direction)
This item adjusts the left-right positioning of the
guidelines displayed in the wide view.
1 Select “WIDE VIEW GUIDELINE ADJUSTMENT
(Horizontal direction)”.
2 Press the + or – button of the switch unit to
adjust the left-right positioning.
3 After completing the adjustment, press the
view button.
Advances to “WIDE VIEW GUIDELINE
ADJUSTMENT (Vertical direction)”.
Wide View Guideline Adjustment
(Vertical Direction)
This item adjusts the length of the guidelines
displayed in the wide view.
1 Select “WIDE VIEW GUIDELINE ADJUSTMENT
(Vertical direction)”.
2 Press the + or – button of the switch unit to
adjust the length.
3 After completing the adjustment, press the
view button.
Advances to “WIDE VIEW GUIDELINE
ADJUSTMENT (Red Line Position Setting).”
Wide View Guideline Adjustment (Red
Line Position Setting)
This item adjusts the position of the red line
displayed in the wide view. The red line can be used
independently to set the reference line for the vehicle
parking position.
1 Select “WIDE VIEW GUIDELINE ADJUSTMENT
(Red Line Position Setting)”.
2 Press the + or – button of the switch unit to
adjust the position of the red line.
By default, the red line is superimposed with the
yellow line that is closest to the vehicle. Move the
red line until the edge of your vehicle’s bumper.
3 After completing the adjustment, press the
view button.
4 Select [Next].
Advances to “OVERHEAD VIEW GUIDELINE
ADJUSTMENT (Size)”.