Operation Manual

4
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
GETTING STARTED
DISPLAY
EASY MENU
(For )
ON
:Both display and button illumination change to white color when
entering [
FUNCTION ].; OFF :Both display and button illumination remain as
[
COLOR  SELECT ] color. (  8 )
TUNER SETTING
PRESET TYPE
NORMAL :Memorizes one station for each preset button in each band (FM1/
FM2/ FM3/ MW/ LW).;
MIX :Memorizes one station for each preset button,
regardless of the selected band.
SYSTEM
KEY BEEP
ON :Activates the keypress tone.; OFF :Deactivates.
SOURCE SELECT
BUILT-IN AUX
ON :Enables AUX in source selection.; OFF :Disables. (  8 )
P-OFF WAIT Applicable only when the demonstration mode is turned off.
Sets the duration when the unit will automatically turn off (while in standby
mode) to save the battery.
20M : 20minutes; 40M : 40minutes; 60M : 60minutes;
WAIT TIME – – –/ OFF – – – :Cancels
F/W UPDATE
UPDATE SYSTEM
F/W UP xx.xx
YES :Starts upgrading the firmware.; NO :Cancels (upgrading is not
activated).
For details on how to update the firmware, see: www.kenwood.com/cs/ce/
CLOCK
CLOCK DISPLAY
ON :The clock time is shown on the display even when the unit is turned off.;
OFF :Cancels.
ENGLISH Selected language is use as the display langauge for [ FUNCTION ] menu
and Tag information (folder name, file name, song title, artist name, album
name) if applicable.
РУССКИЙ
6 Turn the volume knob to select [ 12H ] or [ 24H ], then press the
knob.
7 Press and hold to exit.
To return to the previous setting item, press .
(For / / / )
While in clock display screen...
Press and hold
to enter clock adjustment mode
directly.
Then, perform step
4 to set the clock.
Set the initial settings
1
Press to enter STANDBY.
2 Press the volume knob to enter [ FUNCTION ].
For
/ / / , pressing
AUD enter [
AUDIO CONTROL ] directly.
3 Turn the volume knob to make a selection (see the following
table), then press the knob.
4 Repeat step 3 until the desired item is selected or activated.
5 Press and hold to exit.
To return to the previous setting item, press .
Default:
XX
AUDIO CONTROL
SWITCH
PREOUT
REAR / SUB-W or REAR / SUBWOOFER : Selects whether rear
speakers or a subwoofer are connected to the line out terminals on
the rear (through an external amplifier).
SP SELECT OFF / 5/4 / 6 × 9/6 / OEM : Selects according to the speaker size
(5inches or 4inches, 6×9inches or 6inches) or OEM speakers for
optimum performance.
3
JS_KWD_KMM_264_EN_EN_4.indd 4JS_KWD_KMM_264_EN_EN_4.indd 4 2/9/2014 11:12:31 AM2/9/2014 11:12:31 AM