Owner's Manual

ENGLISH
7
RADIO (for / / /
/ )
Search for a station
1
Press repeatedly to select RADIO.
2 Press repeatedly (or press / on the
remote control) to select FM1/FM2/FM3/AM.
3 Press S/T (or press S/ on the remote
control) to search for a station.
• To change the searching method for S/T: Press
repeatedly.
AUTO1 : Automatically search for a station.
AUTO2 : Search for a preset station.
MANUAL : Manually search for a station.
• To store a station: Press and hold one of the number buttons
(1to6).
• To select a stored station: Press one of the number buttons
(1to6) (or press one of the number buttons (1to6) on the
remote control).
Direct Access Tuning (using the remote control)
1 Press DIRECT to enter Direct Access Tuning.
2 Press the number buttons to enter a frequency.
3 Press to search for a station.
• To cancel, press
or DIRECT.
• If no operation is done for 10seconds after step
2, Direct Access
Tuning is automatically canceled.
HD Radio™ tuner (for )
3 Press the volume knob to display the information related to the message.
4 Press again to exit.
• “NO LIST” appears when the list is empty.
• This feature can store up to four messages in the list.
• To clear the message list, set
[FACTORY RESET] to [YES] . ( 5)
Other settings
1
Press the volume knob to enter [FUNCTION] .
2 Turn the volume knob to select an item (see the following table), then
press the knob.
3 Repeat step 2 until the desired item is selected or activated.
4 Press and hold to exit.
To return to the previous setting item, press
.
Default:
XX
TUNER SETTING
IF BAND
AUTO :Increases the tuner selectivity to reduce interference noises from adjacent
FM stations. (Stereo effect may be lost.);
WIDE :Subjects to interference noises
from adjacent FM stations, but sound quality will not be degraded and the stereo
effect will remain.
AUTO MEMORY YES :Automatically starts memorizing 6 stations with good reception.; NO :Cancels.
• Selectable only if [NORMAL] is selected for [PRESET TYPE] . ( 5)
RECEIVE MODE
Sets the receive mode of the HD Radio receiver.
AUTO :Automatically tunes to analog broadcast when there is no digital broadcast.;
DIGITAL :Tunes in to digital broadcast only.; ANALOG :Tunes in to analog
broadcast only.
CLOCK
TIME SYNC
ON :Synchronizes the unit’s time to the Radio Broadcast Data System station time.;
OFF :Cancels.
JS_KWD_KMM_BT522HD_KN_EN_9.indd 7 7/7/2017 11:24:51 AM