Owner's Manual
Table Of Contents
- Instruction Manual
- Reset
- Bluetooth PIN (0000)
- Clock Set
- Demo Mode
- Initial Settings
- Attaching / Removing Faceplate
- Table of Contents
- Parts & Controls
- Basic Operation
- Getting Started
- Radio Operation
- USB / iPod / Android Operation
- AUX Input
- Pandora
- iHeartRadio
- Spotify
- SiriusXM (for KMM-BT322U)
- Bluetooth
- Audio Settings
- Display Settings
- Troubleshooting
- Messages
- Specs
- Installation / Connection
- Warranty
20
ENGLISH
BLUETOOTH®
To On the faceplate On the remote control
While talking on the first incoming call...
Answer another incoming
call and hold the current
call
Press
. Press .
Reject another incoming
call
Press
.
Press
.
While having two active calls...
End current call and
activate held call
Press
.
Press
.
Swap between the current
call and held call
Press
. Press .
Adjust the phone volume
[00]
to
[35]
(Default:
[15]
)
Turn the volume knob
during a call.
Press
or
.
• This adjustment will not affect the volume of the
other sources.
Switch between hands-free
and private talk modes
Press
during a call.
• Operations may vary
according to the connected
Bluetooth device.
( Not available )
Improve the voice quality
While talking on the phone...
1 Press the volume knob to enter
[FUNCTION]
.
2 Turn the volume knob to select an item (see the following table), then press the
knob.
3 Repeat step 2 until the desired item is selected or activated.
4 Press and hold to exit.
To return to the previous setting item, press
.
Default:
XX
MIC GAIN –10
to
+10
(
–4
):The sensitivity of the microphone
increases as the number increased.
NR LEVEL –5
to
+5
(
0
):Adjust the noise reduction level
until the least noise is being heard during a phone
conversation.
ECHO CANCEL –5
to
+5
(
0
):Adjust the echo cancellation delay time
until the least echo is being heard during a phone
conversation.
Make the settings for receiving a call
1
Press to enter Bluetooth mode.
2 Turn the volume knob to select an item (see the
following table), then press the knob.
3 Repeat step 2 until the desired item is selected or
activated.
4 Press and hold to exit.
To return to the previous setting item, press
.
Default:
XX
SETTINGS
AUTO ANSWER
1
to
30
:The unit answers incoming call automatically
in the selected time (in seconds).;
OFF
:Cancels.
BATT/SIGNAL*
(For / /
/ )
AUTO
:Shows the strength of the battery and signal
when the unit detects a Bluetooth device and the
Bluetooth device is connected.;
OFF
:Cancels.
*
Functionality depends on the type of the phone used.
JS_KWD_KMM_BT522HD_KN_EN_9.indd 20 7/7/2017 11:24:55 AM