Owner's Manual
Table Of Contents
- Instruction Manual
- Reset
- Bluetooth PIN (0000)
- Clock Set
- Demo Mode
- Initial Settings
- Attaching / Removing Faceplate
- Table of Contents
- Parts & Controls
- Basic Operation
- Getting Started
- Radio Operation
- USB / iPod / Android Operation
- AUX Input
- Pandora
- iHeartRadio
- Spotify
- SiriusXM (for KMM-BT322U)
- Bluetooth
- Audio Settings
- Display Settings
- Troubleshooting
- Messages
- Specs
- Installation / Connection
- Warranty
ENGLISH
21
BLUETOOTH®
Make a call
You can make a call from the call history, phonebook, or dialing
the number. Call by voice is also possible if your mobile phone has
the feature.
1 Press to enter Bluetooth mode.
“(First device name)” appears.
• If two Bluetooth phones are connected, press again to
switch to another phone.
“(Second device name)” appears.
2 Turn the volume knob to select an item (see the following
table), then press the knob.
3 Repeat step 2 until the desired item is selected/activated or
follow the instructions stated on the selected item.
4 Press and hold to exit.
To return to the previous setting item, press
.
CALL HISTORY
(Applicable only if the phone supports PBAP.)
1
Press the volume knob to select a name or a phone number.
•
/ / /
: “INCOMING”, “OUTGOING”, or “MISSED”
is shown on the lower part of the display to indicate the
previous call status.
•
/ : “I” indicates call
received, “O” indicates call made, “M” indicates call missed.
• Press
DISP
to change the display category (NUMBER or
NAME).
• “NO DATA” appears if there is no recorded call history.
2
Press the volume knob to call.
PHONE BOOK
(Applicable only if the phone supports PBAP.)
1
Turn the volume knob quickly to enter alphabet search mode (if the
phonebook contains many contacts).
The first menu (ABCDEFGHIJK) appears.
• To go to the other menu (LMNOPQRSTUV or WXYZ1
*
), press
/
.
• To select the desired first letter, turn the volume knob or press
S/T
,
then press the knob.
Select “1” to search with numbers and select “
*
” to search with symbols.
2
Turn the volume knob to select a name, then press the knob.
3
Turn the volume knob to select a phone number, then press the knob to call.
•
The phonebook of the connected phone is automatically transferred to the unit
when pairing.
•
Contacts are categorized as: HOME, OFFICE, MOBILE, OTHER, GENERAL or HM
(home), OF (office), MO (mobile), OT (other), GE (general).
•
This unit can display only non-accent letters. (Accent letters such as “Ú” is
shown as “U”.)
NUMBER DIAL
1
Turn the volume knob to select a number (0 to 9) or character ( , #, +).
2
Press
S/T
to move the entry position.
Repeat steps
1
and
2
until you finish entering the phone number.
3
Press the volume knob to call.
(or using the remote control)
1
Press the number buttons (
0
to
9
) to enter the phone number.
2
Press
to call.
VOICE
Speak the name of the contact you want to call or the voice command to control
the phone functions.
( 22, Make a call using voice recognition)
BATT LOW
/
MID
/
FULL
*
:Shows the strength of the battery.
NO SIGNAL
/
LOW
/
MID
/
MAX
*
:Shows the strength of the current received signal.
*
Functionality depends on the type of the phone used.
JS_KWD_KMM_BT522HD_KN_EN_9.indd 21 7/7/2017 11:24:55 AM