Owner's Manual

24
ENGLISH
BLUETOOTH®
Settings to use KENWOOD Remote application
KENWOOD Remote application is designed to control the KENWOOD
car receiver’s operations from the iPhone/iPod (via Bluetooth or via USB
input terminal) or Android smartphone (via Bluetooth).
Preparation:
Install the latest version of KENWOOD Remote application on your device
before connecting. For more information, visit
<www.kenwood.com/cs/ce/>.
1 Press the volume knob to enter [FUNCTION] .
2 Turn the volume knob to select an item (see the following table),
then press the knob.
3 Repeat step 2 until the desired item is selected or activated.
4 Press and hold to exit.
To return to the previous setting item, press
.
Default:
XX
REMOTE APP
SELECT
Select the device (IOS or ANDROID) to use the application.
IOS YES :Selects iPhone/iPod to use the application via Bluetooth or connected via
USB input terminal.;
NO :Cancels.
If IOS is selected, select iPod BT source (or iPod FRONT/iPod REAR/iPod USB
if your iPhone/iPod is connected via USB input terminal) to activate the
application.
• The connectivity of the application will be interrupted or disconnected if:
– You change from iPod BT source to any playback source connected via the
USB input terminal.
– You change from iPod FRONT/iPod REAR/iPod USB source to iPod BT
source.
ANDROID YES :Selects Android smartphone to use the application via Bluetooth.;
NO : Cancels.
ANDROID LIST *:Selects the Android smartphone to use from the list.
* Displayed only when [ANDROID] of [SELECT] is set to [YES] .
STATUS Shows the status of the selected device.
IOS CONNECTED : You are able to use the application using the iPhone/iPod
connected via Bluetooth or USB input terminal.
IOS NOT CONNECTED : No IOS device is connected to use the application.
ANDROID CONNECTED : You are able to use the application using the Android
smartphone connected via Bluetooth.
ANDROID NOT CONNECTED : No Android device is connected to use the
application.
Listen to iPhone/iPod via Bluetooth
You can listen to the songs on the iPhone/iPod via Bluetooth on this unit.
Press repeatedly to select iPodBT.
• You can operate the iPod/iPhone in the same way as iPod/iPhone via
USB input terminal.
( 9)
• If you plug in an iPhone/iPod to the USB input terminal while listening
to iPodBT source, the source automatically change to iPod FRONT/
iPod REAR/iPodUSB. Press
to select iPodBT if the device is still
connected via Bluetooth.
Internet radio via Bluetooth
You can listen to internet radio (Pandora, iHeartRadio and Spotify) on the
iPhone/iPod/Android device via Bluetooth on this unit.
• Make sure the USB input terminal is not connected to any device.
Listen to Pandora (except for )
Preparation:
Select
[ON] for [PANDORA SRC] in [SOURCE SELECT] . ( 5)
1 Open the Pandora application on your device.
2 Connect your device via Bluetooth connection. ( 18)
3 Press repeatedly to select PANDORA (for iPhone/iPod) or
PANDORA BT (for Android device).
The source switches and broadcast starts automatically.
• You can operate Pandora in the same way as Pandora via USB input
terminal.
( 12)
JS_KWD_KMM_BT522HD_KN_EN_9.indd 24 7/7/2017 11:24:56 AM