Owner's Manual
Table Of Contents
- Instruction Manual
- Reset
- Bluetooth PIN (0000)
- Clock Set
- Demo Mode
- Initial Settings
- Attaching / Removing Faceplate
- Table of Contents
- Parts & Controls
- Basic Operation
- Getting Started
- Radio Operation
- USB / iPod / Android Operation
- AUX Input
- Pandora
- iHeartRadio
- Spotify
- SiriusXM (for KMM-BT322U)
- Bluetooth
- Audio Settings
- Display Settings
- Troubleshooting
- Messages
- Specs
- Installation / Connection
- Warranty
ENGLISH
27
AUDIO SETTINGS
REAR HPF R - HPF FRQ
(Refer
FRONT HPF
settings on page 26.)
R - HPF SLOPE
R - HPF GAIN
SUBWOOFER
LPF
SW LPF FRQ
30HZ
/
40HZ
/
50HZ
/
60HZ
/
70HZ
/
80HZ
/
90HZ
/
100HZ
/
120HZ
/
150HZ
/
180HZ
/
220HZ
/
250HZ
: Adjusts the
crossover frequency for the subwoofer (low pass filter).;
THROUGH
: All signals are sent to the subwoofer.
SW LPF SLOPE –6DB
/
–12DB
/
–18DB
/
–24DB: Adjusts the crossover
slope.
(Selectable only if a setting other than
[THROUGH]
is
selected for
[SW LPF FRQ]
.)
SW LPF PHASE REVERSE
(180°)/
NORMAL
(0°): Selects the phase of the
subwoofer output to be in line with the speaker output
for optimum performance.
SW LPF GAIN –8
to
0
:Adjusts the output volume of the subwoofer.
DTA SETTINGS
For settings,
Digital Time Alignment settings
.
CAR SETTINGS
•
(For / )
The following item is selectable only if
[SWITCH PREOUT]
is set to
[SUB-W]
( 4)
:
–
[SUB-W LEVEL]
,
[SUBWOOFER SET]
–
[SUBWOOFER]
of
[SPEAKER SIZE]
–
[SUBWOOFER LPF]
of
[X ’ OVER]
–
[SUBWOOFER]
of
[DISTANCE]
and
[GAIN]
in
[DTA SETTINGS]
•
The following item is selectable only if
[SUBWOOFER SET]
is set to
[ON]
( 26)
:
–
[SUB-W LEVEL]
–
[SUBWOOFER]
of
[SPEAKER SIZE]
–
[SUBWOOFER LPF]
of
[X ’ OVER]
–
[SUBWOOFER]
of
[DISTANCE]
and
[GAIN]
in
[DTA SETTINGS]
•
The following item is selectable only if a setting other than
[NONE]
is selected for
[TWEETER]
,
[REAR]
and
[SUBWOOFER]
of
[SPEAKER SIZE]
:
–
[TWEETER]
,
[REAR HPF]
,
[SUBWOOFER LPF]
of
[X ’ OVER]
Digital Time Alignment settings
Digital Time Alignment sets the delay time of the speaker output to
create a more suitable environment for your vehicle.
• For more information,
28,Determining the value for [DISTANCE] and [GAIN]
of [DTA SETTINGS]
.
DTA SETTINGS
POSITION
Selects your listening position (reference point).
ALL
:Not compensating;
FRONT RIGHT:
Front right seat;
FRONT LEFT
:Front left seat;
FRONT ALL
:Front seat
DISTANCE 0FT
to
20.01FT
:Fine adjust the distance to compensate. (Before
making an adjustment, select the speaker you want to adjust.)
GAIN –8DB
to
0DB
:Fine adjust the output volume of the selected speaker.
(Before making an adjustment, select the speaker you want to adjust.)
DTA RESET YES
:Resets the settings (
[DISTANCE]
and
[GAIN]
) of the selected
[POSITION]
to default.;
NO
:Cancels.
CAR SETTINGS
Identify your car type and rear speaker location in order to make the
adjustment for
[DTA SETTINGS]
.
CAR TYPE COMPACT
/
FULL SIZE CAR
/
WAGON
/
MINIVAN
/
SUV
/
MINIVAN(LONG)
:Selects the type of vehicle.;
OFF:
Not
compensating.
R-SP LOCATION
Selects the location of the rear speakers in your vehicle to calculate the
furthest distance from the listening position selected (reference point).
•
DOOR
/
REAR DECK
:Selectable only when
[CAR TYPE]
is selected as
[OFF]
,
[COMPACT]
,
[FULL SIZE CAR]
,
[WAGON]
or
[SUV]
.
•
2ND ROW
/
3RD ROW
:Selectable only when
[CAR TYPE]
is selected
as
[MINIVAN]
or
[MINIVAN(LONG)]
.
JS_KWD_KMM_BT522HD_KN_EN_9.indd 27 7/7/2017 11:24:57 AM