Owner's Manual

4
GETTING STARTED
Select the display language and cancel the
demonstration
When you turn on the power for the first time (or [FACTORY RESET] is
set to
[YES] , 5 ), the display shows: “SEL LANGUAGE” “PRESS”
“VOLUME KNOB”
1 Turn the volume knob to select [ENG] (English) or [SPA] (Spanish),
then press the knob.
[ENG] is selected for the initial setup.
Then, (except for
) the display shows: “CANCEL
DEMO”
“PRESS” “VOLUME KNOB”.
2 Press the volume knob.
[YES] is selected for the initial setup.
3 Press the volume knob again.
“DEMO OFF” appears.
Set the clock and date
1
Press the volume knob to enter [FUNCTION] .
2 Turn the volume knob to select [CLOCK] , then press the knob.
To adjust the clock
3 Turn the volume knob to select [CLOCK ADJUST] , then press the knob.
4 Turn the volume knob to make the settings, then press the knob.
Hour
Minute
5 Turn the volume knob to select [CLOCK FORMAT] , then press the
knob.
6 Turn the volume knob to select [12H] or [24H] , then press the knob.
1
2
To set the date
7 Turn the volume knob to select [DATE FORMAT] , then press the knob.
8 Turn the volume knob to select [DD/MM/YY] or [MM/DD/YY] , then press
the knob.
9 Turn the volume knob to select [DATE SET] , then press the knob.
10 Turn the volume knob to make the settings, then press the knob.
Day
Month Year or Month Day Year
11 Press and hold to exit.
To return to the previous setting item, press
.
Set the initial settings
1
Press repeatedly to enter STANDBY.
2 Press the volume knob to enter [FUNCTION] .
3 Turn the volume knob to select an item (see the following table),
then press the knob.
4 Repeat step 3 until the desired item is selected or activated.
5 Press and hold to exit.
To return to the previous setting item, press
.
Default:
XX
AUDIO CONTROL
SWITCH
PREOUT
(For / )
REAR / SUB-W : Selects whether rear speakers or a subwoofer are connected
to the line out terminals on the rear (through an external amplifier).
( 38)
DISPLAY
EASY MENU
(For / / /
)
When entering
[FUNCTION] ...
ON :ZONE 1 illumination changes to white color.;
OFF :ZONE 1 illumination remains as [COLOR SELECT] color. ( 29)
• ZONE 2 illumination changes to light blue color when you enter
[FUNCTION] , irregardless of the [EASY MENU] setting.
• Refer to the illustration on page 28 for zone identification.
3
ENGLISH
JS_KWD_KMM_BT522HD_KN_EN_9.indd 4 7/7/2017 11:24:49 AM