KMM-BT308U KMM-BT308 KMR-M308BT DIGITAL MEDIA RECEIVER INSTRUCTION MANUAL RÉCEPTEUR MULTIMÉDIA NUMÉRIQUE MODE D’EMPLOI RECEPTOR DE MEDIOS DIGITALES MANUAL DE INSTRUCCIONES Take the time to read through this instruction manual. Familiarity with installation and operation procedures will help you obtain the best performance from your new Digital Media Receiver.
CONTENTS BEFORE USE BEFORE USE 2 BASICS 3 GETTING STARTED 4 RADIO 5 USB / iPod 6 AUX 8 Pandora® (for KMM-BT308U / KMR-M308BT ) 8 iHeartRadio® (for KMM-BT308U / KMR-M308BT ) 9 SiriusXM® Radio (for KMR-M308BT ) 10 BLUETOOTH® 11 DISPLAY SETTINGS 16 AUDIO SETTINGS 17 MORE INFORMATION 18 TROUBLESHOOTING 19 SPECIFICATIONS 21 INSTALLATION / CONNECTION Warning Do not operate any function that takes your attention away from safe driving.
BASICS Faceplate Remote control (RC-406) Attach Volume knob (turn/press) (for KMM-BT308U / KMM-BT308 ) Remote sensor (Do not expose to bright sunlight.) Display window Detach Detach button Pull out the insulation sheet when using for the first time. How to reset KMM-BT308 How to replace the battery Your preset adjustments will also be erased. To Do this (on the faceplate) Do this (on the remote control) Turn on the power Press B SRC. • Press and hold to turn off the power.
GETTING STARTED 3 Set the initial settings 1 Press B SRC to enter STANDBY. 2 Press the volume knob to enter [FUNCTION]. 3 Turn the volume knob to make a selection (see the following table), then press 1 Cancel the demonstration When you turn on the power (or after you reset the unit), the display shows: “CANCEL DEMO” “PRESS” “VOLUME KNOB” 1 Press the volume knob. [YES] is selected for the initial setup. 2 Press the volume knob again. “DEMO OFF” appears.
RADIO Other settings 1 Press the volume knob to enter [FUNCTION]. 2 Turn the volume knob to make a selection (see the following table), then press the knob. 3 Press and hold to exit. To return to the previous setting item or hierarchy, press . Default: XX Search for a station 1 Press B SRC to select TUNER. 2 Press BAND repeatedly (or press *AM– / #FM+ on RC-406) to select FM1/ FM2/ FM3/ AM. 3 Press S / T (or press S / T (+) on RC-406) to search for a station.
USB / iPod Start playback The source changes automatically and playback starts. USB USB input terminal CA-U1EX (max.: 500 mA) (optional accessory) iPod/iPhone USB input terminal To Do this Pause or resume playback Press 6 IW (or press ENT IW on RC-406). Select a file Press S / T (or press S / T (+) on RC-406). Select a folder *3 Press Reverse/ Fast-forward Press and hold S / T (or press and hold S / T (+) on RC-406). (or press *AM– / #FM+ on RC-406). Repeat play *4 Press 4 repeatedly.
USB / iPod Select a file from a list For iPod: Applicable only when [MODE OFF] is selected. ( 6) 1 Press . 2 Turn the volume knob to make a selection, then press the knob. • MP3/WMA/AAC/WAV/FLAC file: Select the desired folder, then a file. • iPod or KME Light/ KMC file: Select the desired file from the list (PLAYLISTS, ARTISTS, ALBUMS, SONGS, PODCASTS*, GENRES, COMPOSERS*). * Only for iPod. • To return to the root folder (or first file), press number button 5 iPod.
AUX Pandora® (for KMM-BT308U / KMR-M308BT ) Preparation: Select [ON] for [BUILT-IN AUX]. ( 4) Preparation: Install the latest version of the Pandora application onto your device (iPhone/ iPod touch), then create an account and log in to Pandora. • Select [ON] for [PANDORA SRC]. ( 4) To Do this Pause or resume playback Press 6 IW (or press ENT IW on RC-406). Start listening 1 Open the Pandora application on Skip a track Start listening 1 Connect a portable audio player (commercially available).
iHeartRadio® (for KMM-BT308U / KMR-M308BT ) Preparation: Install the latest version of iHeart Link for KENWOOD application onto your device (iPhone/ iPod touch), then create an account and log in to iHeartRadio. • Select [ON] for [IHEART SRC]. ( 4) Start listening 1 Open the iHeart Link application on your device. 2 Connect your device to the USB input terminal. USB input terminal KCA-iP102 (optional accessory) or accessory cable of the iPod/iPhone* 3 Press B SRC to select IHEARTRADIO.
SiriusXM® Radio (for KMR-M308BT ) Preparation: 1 Connect the optional SiriusXM Vehicle Tuner (commercially available). Antenna Expansion port on the rear panel SiriusXM Vehicle Tuner 2 Activate the subscription through www.siriusxm.com/activatenow or call 1-866-635-2349. The Radio ID is required to activate the SiriusXM Vehicle Tuner.
SiriusXM® Radio SiriusXM settings 1 Press the volume knob to enter [FUNCTION]. 2 Turn the volume knob to select [SIRIUS XM], then press the knob. 3 Turn the volume knob to make a selection (see the following table), then press the knob. 4 Press and hold to exit. To return to the previous setting item or hierarchy, press .
BLUETOOTH® Pair a Bluetooth device When connecting a Bluetooth device to the unit for the first time, perform pairing between the unit and the device. Once the pairing is completed, the Bluetooth device will remain registered in the unit even if you reset the unit. • Up to five devices can be registered (paired) in total. • A maximum of two Bluetooth phones and one Bluetooth audio device can be connected at any time. • This unit supports Secure Simple Pairing (SSP).
BLUETOOTH® To Do this Switch between hands-free and private talk modes Press 6 IW during a call. • Operations may vary according to the connected Bluetooth device. Adjust the phone volume Turn the volume knob during a call. Phone volume: [00] to [35] (Default: [15]) • This adjustment will not affect the volume of the other sources. Switch between two connected phones Press repeatedly. • Not applicable during a call. Improve the sound quality during a call While talking on the phone...
BLUETOOTH® PHONE BOOK NUMBER DIAL 1 Turn the volume knob to select a name, then press the knob. 2 Turn the volume knob to select a phone number, then press the knob to call. • If the phone supports PBAP, the phonebook of the connected phone is automatically transferred to the unit when pairing. If the phone does not support PBAP, “TRANSFER PB” appears. Transfer the phonebook manually.
BLUETOOTH® Store a contact in memory You can store up to 6 contacts. 1 Press to enter Bluetooth mode. 2 Turn the volume knob to select [CALL HISTORY], [PHONE BOOK], or [NUMBER DIAL], then press the knob. 3 Turn the volume knob to select a contact or enter a phone number. If a contact is selected, press the volume knob to show the phone number. 4 Press and hold one of the number buttons (1 to 6). “STORED” appears when the contact is stored.
DISPLAY SETTINGS BLUETOOTH® Internet radio via Bluetooth (for KMM-BT308U / KMR-M308BT ) Listen to Pandora Preparation: Select [ON] for [PANDORA SRC]. ( 4) You can listen to Pandora on your smart phone (Android OS) through Bluetooth on this unit. 1 Open the Pandora application on your device. 2 Connect to Bluetooth audio player. ( 11) 3 Press B SRC to select PANDORA. The source switches and broadcast starts automatically. • You can operate Pandora in the same way as Pandora for iPod/iPhone.
AUDIO SETTINGS While listening to any source... 1 Press the volume knob to enter [FUNCTION]. 2 Turn the volume knob to select [AUDIO CONTROL], then press the knob. 3 Turn the volume knob to make a selection (see the following table), then press the knob. Repeat step 3 until the desired item is selected or activated. 4 Press and hold to exit. (or using RC-406) 1 Press AUD to enter [AUDIO CONTROL]. 2 Press J / K to make a selection, then press ENT IW.
MORE INFORMATION General About iPod/iPhone About Bluetooth Detailed information and notes about the playable audio files are stated in an online manual on the following web site: www.kenwood.com/cs/ce/audiofile/ Made for - iPod touch (1st, 2nd, 3rd, 4th, and 5th generation) - iPod classic - iPod nano (3rd, 4th, 5th, 6th, and 7th generation) - iPhone, iPhone 3G, 3GS, 4, 4S, 5 • For the latest compatible list and software versions of iPhone/iPod, see: www.kenwood.
TROUBLESHOOTING “PROTECT” appears and no operations can be done. • Sound cannot be heard. • The unit does not turn on. • Information shown on the display is incorrect. The unit does not work at all. • Adjust the volume to the optimum level. • Check the cords and connections. Check to be sure the terminals of the speaker wires are insulated properly, then reset the unit. If this does not solve the problem, consult your nearest service center. Clean the connectors. ( 2) Reset the unit.
TROUBLESHOOTING “PLEASE LOGIN” “STATION NOT AVAILABLE” “STATION NOT SELECTED” “STREAM ERROR” “THUMB FAILED” “TIMED OUT” “CH LOCKED” Bluetooth® SiriusXM® Radio “CHAN UNSUB” “CH UNAVAIL” “CHECK ANTENNA” “CHECK TUNER” “NO SIGNAL” “SUBSCRIPTION UPDATED – PRESS ENTER TO CONTINUE.” “WRONG CODE” Remedy You haven’t log in. Log in again. Broadcast from the station is over. Echo or noise occurs. Broadcast data is interrupted. Registration of Thumbs Up/Down has failed. The request has resulted in time-out.
USB 1.1, USB 2.0 (Full speed) FAT12/ 16/ 32 DC 5 V 1 A 20 Hz — 20 kHz 105 dB 88 dB 90 dB Compliant with MPEG-1/2 Audio Layer-3 Compliant with Windows Media Audio AAC-LC “.m4a” files Linear-PCM FLAC files Audio USB Standard File System Maximum Supply Current Frequency Response (±1 dB) Signal-to-Noise Ratio (1 kHz) Dynamic Range Channel Separation MP3 Decode WMA Decode AAC Decode WAV Decode FLAC Decode 30 Hz — 15 kHz 64 dB 40 dB 530 kHz — 1 700 kHz (10 kHz space) 29 dBμ (28.
INSTALLATION / CONNECTION Warning • The unit can only be used with a 12 V DC power supply, negative ground. • Disconnect the battery’s negative terminal before wiring and mounting. • Do not connect Battery wire (yellow) and Ignition wire (red) to the car chassis or Ground wire (black) to prevent a short circuit. • Insulate unconnected wires with vinyl tape to prevent a short circuit. • Be sure to ground this unit to the car’s chassis again after installation.
Wiring connection Part list for installation For KMR-M308BT : To the optional SiriusXM Vehicle Tuner (commercially available) ( 10) Fuse (10 A) (A) Faceplate Rear/ subwoofer output Antenna terminal Microphone input jack ( 11) If no connections are made, do not let the wire come out from the tab.
FCC WARNING Informação sobre a eliminação de pilhas This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. Este produto não deve ser eliminado como lixo doméstico geral.
IC (Industry Canada) Notice This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. The term “IC: ” before the certification/ registration number only signifies that the Industry Canada technical specification were met.
• “Made for iPod,” and “Made for iPhone” mean that an electronic accessory has been designed to connect specifically to iPod, or iPhone, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod or iPhone may affect wireless performance.
Units purchased through the U.S.A. military exchangeservice overseas may be serviced under warranty in the continental U.S.A.. subjoctto the following conditions. 1) The original warranty is in effect. 2) Proof of purchase is provided to the servicer. Any and all implied warranties. including warranties of merchantabi lity and fitness lor a particular purpose, shall be limited in duration to the length of this warranty.
This warranty will be honored only in the U.S.A. WHO IS PROTECTED EXCLUSION OF DAMAGES KENWOOD WARRANTY This warranty is enlorceableonly by the original purchaser. KENWOOD'S LIABILITY FOR ANY DEFECTIVE PRODUCT IS LIMITEDTOTHEREPAIRORREPlliCEMENTOFTHEPRODUCT AT OUR OPTION. KENWOOD SHALL NOT BE LIABLEFOR: 1. INSTALLATION DR REMOVAL CHARGES, DAMAGE TO OTHER PROPERTY CAUSED BY ANY DEFECTS IN KENWOOD CAR STEREO COMPONENTS, DAMAGES BASED UPON INCONVENIENCE, LOSS OF USEOF THE PRODUCT: OR 2. ANY OTHER DAMAGES.