KMM-BT518HD KMR-M318BT KMM-BT318U KMM-BT318 DIGITAL MEDIA RECEIVER INSTRUCTION MANUAL RÉCEPTEUR MULTIMÉDIA NUMÉRIQUE MODE D’EMPLOI RECEPTOR DE MEDIOS DIGITALES MANUAL DE INSTRUCCIONES For your records Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your Kenwood dealer for information or service on the product.
FCC WARNING This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. FCC NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
IC (Industry Canada) Notice This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device.
SOFTWARE LICENSE AGREEMENT Article 3 The software embedded in the Product (hereinafter the "Licensed Software") provided by Licensor is copyrighted to or sublicensable by the Licensor, and this Agreement provides for the terms and conditions which Users shall follow in order to use the Licensed Software. 1. The User shall use the Licensed Software by agreeing with the terms of this Software License Agreement.
Article 8 Termination In case the User falls under any of the events described in the following items, the Licensor may immediately terminate this Agreement or claim that the User compensates for the damage incurred by the Licensor due to such event: (1) when the User violated any provision of this Agreement; or (2) when a petition has been filed against the User for an attachment, provisional attachment, provisional disposition or any other compulsory execution.
CONTENTS BEFORE USE BEFORE USE BASICS GETTING STARTED 2 3 4 1 Select the display language and cancel the demonstration 2 Set the clock and date 3 Set the initial settings 6 ) RADIO (for / / 7 9 11 ) USB/iPod/ANDROID AUX Pandora® (for / / iHeartRadio® (for / / ) 13 ) 14 17 24 27 28 30 SiriusXM® Radio (for / 12 ) / BLUETOOTH® AUDIO SETTINGS DISPLAY SETTINGS TROUBLESHOOTING REFERENCES Maintenance More information SPECIFICATIONS INSTALLATION/ CONNECTION 2 • To ensure proper use, please r
BASICS Faceplate Lights up when Bluetooth connection is established. ( 17) Display window Remote control (RC-406) (supplied for ) Remote sensor (Do not expose to bright sunlight.) Pull out the insulation sheet when using for the first time. Detach button : USB cable from the rear of the unit. Volume knob Attach Detach Flashes when the unit enters searching status. How to reset / : Can be remotely controlled with an optionally purchased remote control.
GETTING STARTED 1 Select the display language and cancel the demonstration When you turn on the power for the first time (or [FACTORY RESET] is set to [YES], 5), the display shows: “SEL LANGUAGE” “PRESS” “VOLUME KNOB” 1 Turn the volume knob to select [ENG] (English) or [SPA] (Spanish), then press the knob. [ENG] is selected for the initial setup. (For / / ) Then, the display shows: “CANCEL DEMO” “PRESS” “VOLUME KNOB”. 2 Press the volume knob. [YES] is selected for the initial setup.
GETTING STARTED Register the marine remote ID (for SYSTEM KEY BEEP ON: Activates the keypress tone. ; OFF: Deactivates. SOURCE SELECT PANDORA SRC (For / / ) ON: Enables PANDORA FRONT/PANDORA REAR/PANDORA in source selection. ; OFF: Disables. ( 12) IHEART SRC (For / / ) ON: Enables IHEARTRADIO-F/ IHEARTRADIO-R/ IHEARTRADIO in source selection. ; OFF: Disables. ( 13) BUILT-IN AUX ON: Enables AUX in source selection. ; OFF: Disables.
HD Radio™ tuner (for ) You can tune in to both conventional and HD Radio broadcasts. • To find HD Radio stations in your area, visit . Select an HD Radio multicast channel Many HD Radio stations offer more than one channel programming. This service is called multicasting. While receiving HD Radio multicast channels.... Press S / T to select your desired channel (HD1 to HD8). “LINKING” appears while linking to a multicast channel.
HD Radio™ tuner (for RADIO (for ) / / ) 3 Press the volume knob to display the information related to the message. 4 Press again to exit. • “NO LIST” appears when the list is empty. • This feature can store up to four messages in the list. • To clear the message list, set [FACTORY RESET] to [YES]. ( 5) Other settings Search for a station 1 Press the volume knob to enter [FUNCTION]. 2 Turn the volume knob to select an item (see the following table), then press the knob.
RADIO (for / / ) Other settings CLOCK 1 Press the volume knob to enter [FUNCTION]. 2 Turn the volume knob to select an item (see the following table), then TIME SYNC ON: Synchronizes the unit’s time to the Radio Broadcast Data System/Radio Data System station time. ; OFF: Cancels. press the knob. 3 Repeat step 2 until the desired item is selected/activated or follow the instructions stated on the selected item. 4 Press and hold to exit. To return to the previous setting item, press .
USB/iPod/ANDROID Start playback The source changes automatically and playback starts. USB input terminal USB CA-U1EX (max.: 500 mA) (optional accessory) Selectable source: • : USB FRONT/USB REAR/iPod FRONT/iPod REAR/ANDROID FRONT/ ANDROID REAR • / / : USB/iPod USB/ANDROID iPod/iPhone : You can also connect to the USB cable from the rear of the unit.
USB/iPod/ANDROID Select control mode While in iPod FRONT/iPod REAR/iPod USB source, press 5 repeatedly. MODE ON : Control iPod using the iPod itself. However, you can still play/ pause, file skip, fast-forward or reverse from this unit. MODE OFF : Control iPod from this unit. While in ANDROID FRONT/ANDROID REAR/ANDROID source, press 5 repeatedly. BROWSE MODE : Control Android device from this unit via KENWOOD MUSIC PLAY application installed in the Android device.
USB/iPod/ANDROID Direct Music Search (using the remote control) 1 Press DIRECT. 2 Press the number buttons to enter a file number. 3 Press to search for music. or DIRECT. • To cancel, press • Not available if Random Play is selected. • Not applicable for iPod FRONT, iPod REAR, iPod USB, ANDROID FRONT, ANDROID REAR and ANDROID source. AUX Preparation: Select [ON] for [BUILT-IN AUX] for [SOURCE SELECT]. ( 5) Start listening 1 Connect a portable audio player (commercially available).
Pandora® (for / / ) Preparation: Install the latest version of the Pandora application on your device (iPhone/ iPod touch), then create an account and log in to Pandora. • Select [ON] for [PANDORA SRC] in [SOURCE SELECT]. ( 5) 1 Press . 2 Turn the volume knob to select [NEW STATION], then press the knob. Start listening 3 Turn the volume knob to select [FROM ARTIST] or [FROM TRACK], then press the knob. A new station is created based on the artist or current song.
Pandora® (for / / ) Delete a station While listening to PANDORA... 1 Press . 2 Turn the volume knob to select [STATION DEL], then press the knob. 3 Turn the volume knob to select [SORT BY DATE] or [SORT BY A-Z], then press the knob. 4 Turn the volume knob to select the desired station to delete, then press the knob. 5 Turn the volume knob to select [YES], then press the knob. 6 Press and hold to exit. .
iHeartRadio® (for / / ) Search and store a station 1 Press . 2 Turn the volume knob to select a category, then SiriusXM® Radio (for / / ) Only SiriusXM® brings you more of what you love to listen to, all in one place. Get over 140 channels, including commercial-free music plus the best sports, news, talk, comedy and entertainment. Welcome to the world of satellite radio. A SiriusXM Vehicle Tuner and Subscription are required. For more information, visit . press the knob.
SiriusXM® Radio (for / / 4 Turn the volume knob to select a category, then press the knob. If “ALL CHANNELS” is selected, all the available channels will be shown. 5 Turn the volume knob to select a channel, then press the knob. (or) Press S / T to search for a channel manually. • Pressing and holding S / T changes the channel rapidly. If a locked channel or a mature channel is selected, a pass code input screen appears. Enter the pass code to receive the channel.
SiriusXM® Radio (for / / When you select a SmartFavorite channel, you can rewind and replay up to 30 minutes of any of the missed news, talk, sports or music content. • Playback starts from the beginning of the song if [TUNE START] is set to [ON] (see the following table) for most music channels stored as a SmartFavorite. Press one of the number buttons (1 to 6) to select a stored channel.
BLUETOOTH® BLUETOOTH — Connection Pair and connect a Bluetooth device for the first time 1 Press to turn on the unit.
BLUETOOTH® Connect with a remote device by One-touch (NFC) (for / BLUETOOTH — Mobile phone ) Near Field Communication (NFC) enables short-range wireless communication between the unit and remote devices such as smartphones. By holding an NFC-compatible remote device near to the N-Mark on the unit (volume knob), the unit and remote device proceed to complete pairing and established the BLUETOOTH connection automatically. 1 Activate the NFC function on the remote device.
BLUETOOTH® To On the faceplate On the remote control Default: XX MIC GAIN –10 to +10 (–4): The sensitivity of the microphone increases as the number increased. NR LEVEL –5 to +5 (0): Adjust the noise reduction level until the least noise is being heard during a phone conversation. ECHO CANCEL –5 to +5 (0): Adjust the echo cancellation delay time until the least echo is being heard during a phone conversation. While talking on the first incoming call...
BLUETOOTH® Make a call You can make a call from the call history, phonebook, or dialing the number. Call by voice is also possible if your mobile phone has the feature. 1 Press to enter Bluetooth mode. “(First device name)” appears. • If two Bluetooth phones are connected, press again to switch to another phone. “(Second device name)” appears. 2 Turn the volume knob to select an item (see the following table), then press the knob.
BLUETOOTH® Make a call using voice recognition 1 Press and hold to activate the voice recognition of the connected phone. 2 Speak the name of the contact you want to call or the voice command to control the phone functions. • Supported Voice Recognition features vary for each phone. Refer to the instruction manual of the connected phone for details. • This unit also supports the intelligent personal assistant function of iPhone.
BLUETOOTH® BLUETOOTH — Audio Bluetooth test mode You can check the connectivity of the supported profile between the Bluetooth device and the unit. • Make sure there is no Bluetooth device paired. 1 Press and hold . “PLEASE PAIR YOUR PHONE PIN 0000” appears. 2 Search and select this unit model name (KMM-BT51*HD/KMM-BT31*U/KMM-BT31*/ KMR-M31*BT) on the Bluetooth device. 3 Operate the Bluetooth device to confirm pairing. “TESTING” flashes on the display.
BLUETOOTH® Settings to use KENWOOD Remote application KENWOOD Remote application is designed to control the KENWOOD car receiver’s operations from the iPhone/iPod (via Bluetooth or via USB input terminal) or Android smartphone (via Bluetooth). Preparation: Install the latest version of KENWOOD Remote application on your device before connecting. For more information, visit . 1 Press the volume knob to enter [FUNCTION].
AUDIO SETTINGS While listening to any source... 1 Press the volume knob to enter [FUNCTION]. 2 Turn the volume knob to select an item (see the following table), then press the knob. 3 Repeat step 2 until the desired item is selected or activated. 4 Press and hold to exit. (or using the remote control) 1 Press AUD to enter [AUDIO CONTROL]. 2 Press J / K to select an item, then press . To return to the previous setting item, press .
AUDIO SETTINGS SPEAKER SIZE FRONT The frequency and slope settings are automatically set for the crossover of the selected speaker. SIZE TWEETER 3.5"/4"/4.75"/5"/6.5"/6.75"/7"/4×6/5×7/6×8/6×9/ 7×10: Selects according to the connected speaker size for optimum performance. SMALL/MIDDLE/LARGE: Selects according to the size range of the connected tweeter for optimum performance. ; NONE: Not connected. REAR 3.5"/4"/4.75"/5"/6.5"/6.
AUDIO SETTINGS Digital Time Alignment settings Digital Time Alignment sets the delay time of the speaker output to create a more suitable environment for your vehicle. • For more information, Determining the value for [DISTANCE] and [GAIN] of [DTA SETTINGS].
DISPLAY SETTINGS Default: XX DISPLAY COLOR SELECT Select color for ALL ZONE, ZONE 1 and ZONE 2 separately. 1 Select a zone. (See the illustration on the left column.) 2 Select a color for the selected zone. VARIABLE SCAN/CUSTOM R/G/B/preset colors* Default: / / : VARIABLE SCAN : CUSTOM R/G/B (R = 9/G = 9/B = 9) To make your own color, select [CUSTOM R/G/B]. The color you have made will be stored in [CUSTOM R/G/B]. 1 Press the volume knob to enter the detailed color adjustment.
TROUBLESHOOTING 28 Remedy Symptom Remedy Make sure the media contains supported audio files. ( 30) “READ ERROR” Copy the files and folders onto the USB device again. If this does not solve the problem, reset the USB device or use another USB device. “NO DEVICE” Connect a USB device, and change the source to USB again. “COPY PRO” A copy-protected file is played. “UNSUPPORTED DEVICE” appears.
TROUBLESHOOTING Remedy • Switch off the developer options on the Android device. • Reconnect the Android device. • If this does not solve the problem, the connected Android device does not support [BROWSE MODE]. ( 31) Playback is intermittent or sound skips. Turn off the power saving mode on the Android device. “ANDROID ERROR”/ “NA DEVICE” • Reconnect the Android device. • Restart the Android device. “ADD ERROR” New station creation is unsuccessful.
TROUBLESHOOTING Bluetooth® Symptom 30 Remedy Echo or noise is heard during a phone conversation. • Adjust the microphone unit’s position. ( 17) • Check the [ECHO CANCEL] setting. ( 19) Phone sound quality is poor. • Reduce the distance between the unit and the Bluetooth device. • Move the car to a place where you can get a better signal reception. Voice calling method is not successful. • Use voice calling method in a more quiet environment.
REFERENCES About iPod/iPhone • Via USB: Made for – iPod touch (5th and 6th generation) – iPod nano (7th generation) – iPhone 4S, 5, 5S, 5C, 6, 6 Plus, 6S, 6S Plus, SE • Via Bluetooth: Made for – iPod touch (5th and 6th generation) – iPhone 4S, 5, 5S, 5C, 6, 6 Plus, 6S, 6S Plus, SE • You cannot operate iPod if “KENWOOD” or “ ” is displayed on iPod. • Depending on the version of the operating system of the iPod/iPhone, some functions may not operate on this unit.
REFERENCES Change the display information Each time you press DISP, the display information changes. • If the information is unavailable or not recorded, “NO TEXT”, “NO INFO”, or other information (eg. station name, playing time) appears.
Usable Sensitivity (S/N = 26 dB) 8.2 dBf (0.71 μV/75 Ω) Quieting Sensitivity 17.2 dBf (2.0 μV/75 Ω) : (S/N = 46 dB) / / : (DIN S/N = 46 dB) HD Radio Broadcast: 75 dB (STEREO) Conventional Broadcast: 64 dB (MONO) Stereo Separation (1 kHz) 40 dB 29 dBμ (28.2 μV) Frequency Response (±3 dB) HD Radio Broadcast: 40 Hz — 15 kHz Signal-to-Noise Ratio HD Radio Broadcast: 70 dB (STEREO) USB Standard USB 1.1, USB 2.
INSTALLATION/CONNECTION SPECIFICATIONS Audio Tone Action Band 1: Band 2: Band 3: Band 4: Band 5: Band 6: Band 7: Band 8: Band 9: Band 10: Band 11: Band 12: Band 13: Warning 62.5 Hz ±9 dB 100 Hz ±9 dB 160 Hz ±9 dB 250 Hz ±9 dB 400 Hz ±9 dB 630 Hz ±9 dB 1 kHz ±9 dB 1.6 kHz ±9 dB 2.5 kHz ±9 dB 4 kHz ±9 dB 6.3 kHz ±9 dB 10 kHz ±9 dB 16 kHz ±9 dB Preout Level/Load (USB) • The unit can only be used with a 12 V DC power supply, negative ground.
INSTALLATION/CONNECTION Installing the unit (in-dash mounting) Part list for installation (A) Faceplate Do the required wiring. ( 36, 37) (B) Trim plate Hook on the top side Dashboard of your car Orientate the trim plate as illustrated before fitting. (C) Mounting sleeve Bend the appropriate tabs to hold the mounting sleeve firmly in place. (D) Wiring harness When installing without the mounting sleeve 1 Remove the mounting sleeve and trim plate from the unit.
INSTALLATION/CONNECTION Wiring connection (for ) IMPORTANT : We recommend installing the unit with a commercially available custom wiring harness specific for your car and leave this job to professionals for your safety. Consult your car audio dealer. When connecting to an external amplifier, connect its ground wire to the car’s chassis to avoid damaging the unit. Output terminals USB cable (DC 5 V 1.5 A) (approx. 1.
INSTALLATION/CONNECTION Wiring connection (for / IMPORTANT : We recommend installing the unit with a commercially available custom wiring harness specific for your car and leave this job to professionals for your safety. Consult your car audio dealer.
• HD Radio Technology manufactured under license from iBiquity Digital Corporation. U.S. and Foreign Patents. HD Radio™ and the HD, HD Radio, and “Arc” logos are proprietary trademarks of iBiquity Digital Corp. • “Made for iPod,” and “Made for iPhone” mean that an electronic accessory has been designed to connect specifically to iPod, or iPhone, respectively, and has been certified by the developer to meet Apple performance standards.