Owner's Manual
Table Of Contents
- Instruction Manual
- Reset
- Bluetooth PIN (0000)
- Clock Set
- Demo Mode
- Attaching / Removing Faceplate
- Initial Settings
- Table of Contents
- Parts & Controls
- Basic Operation
- Getting Started
- Radio Operation
- USB / iPod / Android Operation
- AUX Input
- Pandora
- iHeartRadio
- SiriusXM
- Bluetooth
- Audio Settings
- Display Settings
- Troubleshooting
- Messages
- Specs
- Installation / Connection
ENGLISH
7
RADIO
(for / / )
Search for a station
1
Press repeatedly to select TUNER.
2 Press repeatedly (or press / on
the remote control) to select FM1/FM2/FM3/AM.
3 Press S/T (or press S/ on the remote
control) to search for a station.
• To change the searching method for S/T: Press
repeatedly.
AUTO1 : Automatically search for a station.
AUTO2 : Search for a preset station.
MANUAL : Manually search for a station.
• To store a station: Press and hold one of the number
buttons (1to6).
• To select a stored station: Press one of the number buttons
(1to6) (or press one of the number buttons (1to6) on the
remote control).
Direct Access Tuning
(using the remote control)
1 Press DIRECT to enter Direct Access Tuning.
2 Press the number buttons to enter a frequency.
3 Press to search for a station.
• To cancel, press
or DIRECT.
• If no operation is done for 10seconds after step
2, Direct
Access Tuning is automatically canceled.
HD Radio™ tuner
(for )
3 Press the volume knob to display the information related to the message.
4 Press again to exit.
• “NO LIST” appears when the list is empty.
• This feature can store up to four messages in the list.
• To clear the message list, set
[FACTORY RESET]
to
[YES]
.
( 5)
Other settings
1
Press the volume knob to enter
[FUNCTION]
.
2 Turn the volume knob to select an item (see the following table), then press
the knob.
3 Repeat step 2 until the desired item is selected or activated.
4 Press and hold to exit.
To return to the previous setting item, press
.
Default:
XX
TUNER SETTING
IF BAND
AUTO
:Increases the tuner selectivity to reduce interference noises from adjacent
FM stations. (Stereo effect may be lost.);
WIDE
:Subjects to interference noises from
adjacent FM stations, but sound quality will not be degraded and the stereo effect will
remain.
AUTO MEMORY YES
:Automatically starts memorizing 6 stations with good reception.;
NO
:Cancels.
•
Selectable only if
[NORMAL]
is selected for
[PRESET TYPE]
.
( 4)
RECEIVE MODE
Sets the receive mode of the HD Radio receiver.
AUTO
:Automatically tunes to analog broadcast when there is no digital broadcast.;
DIGITAL
:Tunes in to digital broadcast only.;
ANALOG
:Tunes in to analog broadcast
only.
CLOCK
TIME SYNC
ON
:Synchronizes the unit’s time to the Radio Broadcast Data System station time.;
OFF
:Cancels.
JS_KWD_KMM_BT518HD_KN_EN_5.indd 7 11/3/2016 2:08:49 PM