Owner's Manual

18
ENGLISH
BLUETOOTH — Mobile phone
Receive a call
When there is an incoming call:
• ZONE 2 illuminates in green color and flashes.
• The unit answers the call automatically if
[AUTO ANSWER] is set to a selected time.
( 19)
During a call:
• ZONE 1 illuminates according to the settings made for
[DISPLAY] ( 27) and ZONE
2 illuminates in green color.
• If you turn off the unit or detach the faceplate, the Bluetooth connection is
disconnected.
The following operations may differ or not available depending on the connected
phone.
To On the faceplate On the remote control
First incoming call...
Answer a call
Press
or the volume knob
or one of the number buttons
(1 to 6).
Press
.
Reject a call
Press
.
Press
.
End a call
Press
.
Press
.
BLUETOOTH®
Connect with a remote device by One-touch (NFC)
(for / )
Near Field Communication (NFC) enables short-range wireless
communication between the unit and remote devices such as
smartphones.
By holding an NFC-compatible remote device near to the
N-Mark on the unit (volume knob), the unit and remote device
proceed to complete pairing and established the BLUETOOTH
connection automatically.
1 Activate the NFC function on the remote device.
Refer to the instruction manual of the remote device for
more information.
2 Hold the remote device near to the N-Mark on the unit
(volume knob).
The device vibrates when pairing is completed.
• To disconnect, hold the remote device near to the N-Mark on
the unit (volume knob) again.
• This unit only can recognize and connect to one NFC-
compatible device at a time.
JS_KWD_KMM_BT518HD_KN_EN_5.indd 18 11/3/2016 2:08:52 PM