Owner's Manual

22
BLUETOOTH — Audio
ENGLISH
BLUETOOTH®
Bluetooth test mode
You can check the connectivity of the supported
profile between the Bluetooth device and the unit.
• Make sure there is no Bluetooth device paired.
1 Press and hold .
“PLEASE PAIR YOUR PHONE PIN 0000” appears.
2 Search and select this unit model name
(KMM-BT51*HD/KMM-BT31*U/KMM-BT31*/
KMR-M31*BT) on the Bluetooth device.
3 Operate the Bluetooth device to confirm
pairing.
“TESTING” flashes on the display.
The connectivity result (OK or NG) appears after
the test.
PAIRING: Pairing status
HF CNT: Hands-Free Profile (HFP) compatibility
AUD CNT: Advanced Audio Distribution Profile
(A2DP) compatibility
PB DL: Phonebook Access profile (PBAP)
compatibility
To cancel test mode, press and hold
to turn
off the unit.
Audio player via Bluetooth
1
Press repeatedly (or press SRC on the remote control) to select BTAUDIO.
2 Operate the Bluetooth audio player to start playback.
To On the faceplate On the remote control
Playback/pause
Press
. Press
.
Select group or folder
Press J / K.
Press
/ .
Reverse/Forward skip
Press S/T. Press S/
.
Reverse/Fast-forward
Press and hold S/T. Press and hold S/
.
Repeat play Press
repeatedly.
ALL REPEAT , FILE REPEAT , REPEAT OFF
( Not available )
Random play Press and hold
to select
ALL RANDOM .
• Press
to select RANDOM OFF .
( Not available )
Select a file from a
folder/list
Refer to “Select a file from a folder/
list” on page 10.
( Not available )
Switch between
connected Bluetooth
audio device
Press 5.*
( Not available )
*
Pressing the “Play” key on the connected device itself also causes switching of sound output from the device.
Operations and display indications may differ according to their availability on the connected
device.
While in BT AUDIO source, you
can connect to five Bluetooth
audio devices and switch
between these five devices.
JS_KWD_KMM_BT518HD_KN_EN_5.indd 22 11/3/2016 2:08:53 PM