Owner's Manual
Table Of Contents
- Instruction Manual
- Reset
- Bluetooth PIN (0000)
- Clock Set
- Demo Mode
- Attaching / Removing Faceplate
- Initial Settings
- Table of Contents
- Parts & Controls
- Basic Operation
- Getting Started
- Radio Operation
- USB / iPod / Android Operation
- AUX Input
- Pandora
- iHeartRadio
- SiriusXM
- Bluetooth
- Audio Settings
- Display Settings
- Troubleshooting
- Messages
- Specs
- Installation / Connection
ENGLISH
25
AUDIO SETTINGS
SPEAKER SIZE
The frequency and slope settings are automatically set for the crossover of the
selected speaker.
FRONT SIZE 3.5"
/
4"
/
4.75"
/
5"
/
6.5"
/
6.75"
/
7"
/
4×6
/
5×7
/
6×8
/
6×9
/
7×10
: Selects according to the connected speaker size for
optimum performance.
TWEETER SMALL
/
MIDDLE
/
LARGE
:Selects according to the size
range of the connected tweeter for optimum performance.;
NONE
:Not connected.
REAR 3.5"
/
4"
/
4.75"
/
5"
/
6.5"
/
6.75"
/
7"
/
4×6
/
5×7
/
6×8
/
6×9
/
7×10
: Selects
according to the connected speaker size for optimum performance.;
NONE
:Not
connected.
SUBWOOFER 6.5"
/
8"
/
10"
/
12"
/
15" OVER
: Selects according to the connected speaker size
for optimum performance.;
NONE
:Not connected.
X ' OVER
TWEETER FRQ
1KHZ
/
1.6KHZ
/
2.5KHZ
/
4KHZ
/
5KHZ
/
6.3KHZ
/
8KHZ
/
10KHZ
/
12.5KHZ: Adjusts the crossover frequency for the
tweeter speaker.
GAIN LEFT
–8
to
0
:Adjusts the output volume of the left tweeter.
GAIN RIGHT –8
to
0
:Adjusts the output volume of the right tweeter.
FRONT HPF F - HPF FRQ 30HZ
/
40HZ
/
50HZ
/
60HZ
/
70HZ
/
80HZ
/
90HZ
/
100HZ
/
120HZ
/
150HZ
/
180HZ
/
220HZ
/
250HZ: Adjusts the crossover
frequency for the selected speakers (high pass filter).
;
THROUGH
: All signals are sent to the selected speakers.
F - HPF SLOPE –6DB
/
–12DB
/
–18DB
/
–24DB: Adjusts the crossover slope.
(Selectable only if a setting other than
[THROUGH]
is selected
for
[F - HPF FRQ]
.)
F - HPF GAIN –8
to
0
:Adjusts the output volume of the selected speaker.
REAR HPF R - HPF FRQ
(Refer
FRONT HPF
settings.)
R - HPF SLOPE
R - HPF GAIN
SUBWOOFER
LPF
SW LPF FRQ
30HZ
/
40HZ
/
50HZ
/
60HZ
/
70HZ
/
80HZ
/
90HZ
/
100HZ
/
120HZ
/
150HZ
/
180HZ
/
220HZ
/
250HZ
: Adjusts the crossover frequency for the
subwoofer (low pass filter).;
THROUGH
: All
signals are sent to the subwoofer.
SW LPF SLOPE –6DB
/
–12DB
/
–18DB
/
–24DB: Adjusts the
crossover slope.
(Selectable only if a setting other than [THROUGH]
is selected for
[SW LPF FRQ]
.)
SW LPF PHASE REVERSE
(180°)/
NORMAL
(0°): Selects the
phase of the subwoofer output to be in line with
the speaker output for optimum performance.
SW LPF GAIN –8
to
0
:Adjusts the output volume of the
subwoofer.
DTA SETTINGS
For settings,
26, Digital Time Alignment settings
.
CAR SETTINGS
•
The following item is selectable only if
[SUBWOOFER SET]
is set to
[ON]
( 24)
:
–
[SUB-W LEVEL]
–
[SUBWOOFER]
of
[SPEAKER SIZE]
–
[SUBWOOFER LPF]
of
[X’OVER]
–
[SUBWOOFER]
of
[DISTANCE]
and
[GAIN]
in
[DTA SETTINGS]
•
The following item is selectable only if a setting other than
[NONE]
is selected for
[TWEETER]
,
[REAR]
and
[SUBWOOFER]
of
[SPEAKER SIZE]
:
–
[TWEETER]
,
[REAR HPF]
,
[SUBWOOFER LPF]
of
[X’OVER]
JS_KWD_KMM_BT518HD_KN_EN_5.indd 25 11/3/2016 2:08:53 PM