Owner's Manual
Table Of Contents
- Instruction Manual
- Reset
- Bluetooth PIN (0000)
- Clock Set
- Demo Mode
- Attaching / Removing Faceplate
- Initial Settings
- Table of Contents
- Parts & Controls
- Basic Operation
- Getting Started
- Radio Operation
- USB / iPod / Android Operation
- AUX Input
- Pandora
- iHeartRadio
- SiriusXM
- Bluetooth
- Audio Settings
- Display Settings
- Troubleshooting
- Messages
- Specs
- Installation / Connection
ENGLISH
35
Do the required wiring.
( 36, 37)
Dashboard of
your car
Bend the appropriate tabs to hold the
mounting sleeve firmly in place.
How to remove the unit
1
Detach the faceplate.
2
Fit the catch pin on the extraction keys
into the holes on both sides of the trim
plate, then pull it out.
3
Insert the extraction keys deeply into the
slots on each side, then follow the arrows
as shown on the illustration.
Installing the unit (in-dash mounting)
When installing without the mounting sleeve
1
Remove the mounting sleeve and trim plate from the unit.
2
Align the holes in the unit (on both sides) with the vehicle mounting bracket and
secure the unit with screws (supplied/commercially available).
Use only the specified screws. Using wrong screws might damage the unit.
Hook on the top side
Orientate the trim plate
as illustrated before
fitting.
INSTALLATION/CONNECTION
Part list for installation
(A)
Faceplate
(C)
Mounting sleeve
(B)
Trim plate
(D)
Wiring harness
(E)
Extraction key
(F)
Screws (supplied for )
For
For /
/
For
For /
/
JS_KWD_KMM_BT518HD_KN_EN_5.indd 35 11/3/2016 2:08:58 PM