Owner's Manual

36
Wiring connection (for )
Fuse (10A)
Output terminals
Antenna terminal
Car fuse box
Car fuse box
Battery
Ignition switch
Blue/White
(Power control wire/
Antenna control wire)
(12 V
350 mA)
Light blue/yellow
(Steering remote control
wire)
Red (Ignition wire)
Yellow (Battery wire)
Black (Ground wire)
To the metallic body or chassis of the car
To the power control terminal when using the
optional power amplifier or to the antenna
control terminal in the vehicle
Brown
(Mute control wire)
White
Gray
Green
Purple
White/Black
Gray/Black
Green/Black
Purple/Black
To connect the Kenwood navigation system,
refer your navigation manual
To front speaker (left)
To rear speaker (left)
To front speaker (right)
To rear speaker (right)
If no connections are made, do not let the wire come out from the tab.
When connecting to an external amplifier, connect its ground wire to
the car’s chassis to avoid damaging the unit.
IMPORTANT : We recommend installing the unit with a commercially available custom wiring harness specific for
your car and leave this job to professionals for your safety. Consult your car audio dealer.
INSTALLATION/CONNECTION
MIC (Microphone input
terminal)
( 17)
Expansion port (12 V 500mA)
To the optional SiriusXM Vehicle Tuner
(commercially available)
( 14)
To the steering wheel remote control adapter
USB cable (DC 5 V
1.5 A)
(approx. 1.2 m/4 feet)
ENGLISH
JS_KWD_KMM_BT518HD_KN_EN_5.indd 36 11/3/2016 2:08:58 PM