CD-RECEIVER KDC-BT50U KDC-5047U KMR-440U INSTRUCTION MANUAL The latest version of the Instruction Manual can be downloaded from www.kenwood.com/cs/ce/. Before reading this manual, please access this site to check whether your manual is the latest one.
Contents Before use 3 Bluetooth Audio Operation Basic Operations 4 Before Use Basic Operation General opreration 6 Bluetooth Setup Removing the Faceplate Muting the audio upon reception of phone call Audio Adjustments 7 Audio Control Audio Preset Memory Audio Preset Recall Music disc/Audio file Operation 9 Music Search Music Search for iPod Alphabet Search Skip Search Direct Search Related Search My Playlist for iPod Basic Operation of Disc Changer (Optional) Tuner Operation 13 15 Functio
Before use 2WARNING To prevent injury or fire, take the following precautions: • To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit. Before using this unit for the first time This unit is initially set on the Demonstration mode. When using this unit for the first time, cancel the Demonstration mode. Refer to (page 4). How to reset your unit • If the unit fails to operate properly, press the Reset button.
Basic Operations [ ] [SRC] [ ] [FNC] KDC-BT50U Release Microphone [0] Disc slot KDC-5047U KDC-5047U Control [ENTER] [FAVORITE] KMR-440U KMR-440U [DISP] [AUDIO] Knob KDC-BT50U [ ] USB Terminal Auxiliary input KDC-BT50U [ ] Before Using Common Operation Exit Demonstration Mode Turn off the demonstration mode when you use it for the first time after installation. Power and source selection Turns the power ON by pressing the [SRC] button. When the power is ON, select a source.
display. Auxiliary input Portable audio device can be connected with the stereo mini-plug (3.5 mm ø). • For the playable audio files, devices, iPod, see (page 34). Listening to Radio Selecting a Tuner source 1 Press the [SRC] button. 2 Turn the Control knob to select “TUNER”, and then press the [ENTER] button. Playing Music (CD/USB/iPod) Playing Disc Insert the disc in the Disc slot. When inserted, the source is switched automatically and a song starts playing.
General opreration Removing the Faceplate The faceplate of the unit can be detached and taken with you, helping to deter theft. Detaching the Faceplate Press the Release button. Function of KDC-5047U/ KMR-440U Muting the audio upon reception of phone call The audio system automatically mutes when a call comes in. When a call comes in “CALL” is displayed. The audio system pauses. Listening to the audio during a call Press the [SRC] button. The “CALL” display disappears and the audio system comes back ON.
Audio Adjustments Audio Control You can adjust following Audio Control items; Display “SubWoofer” “Bass Boost” “System Q” Audio item Subwoofer output Bass Boost Preset Equalizer curve “Bass Adjust” “Bass Center FRQ” Bass Center Frequency “Bass Level” Bass level “Bass Q Factor” Bass Q Factor “Bass EXT” Bass Extend “Middle Adjust” “Middle Center Middle Center FRQ” Frequency “Middle Level” Middle level “Middle Q Factor” Middle Q Factor “Treble Adjust” “Treble Center FRQ” Treble Center Frequency “Treble Level
Audio Adjustments Audio Preset Memory Audio Preset Recall Registering the value setup by Audio Control. Recalling the sound setup registered by
Music disc/Audio file Operation Function of Audio file/ Internal CD source Function of iPod source Music Search Music Search for iPod Selecting the music you want to listen to from the device or media being played now. Searching for the song (in iPod) you want to play. 1 Enter Music Search mode Press the [ ] button. “MUSICSEARCH” is displayed.
Music disc/Audio file Operation Function of iPod source Function of iPod source/ Music Editor media Alphabet Search Skip Search You can select an alphabetic character from the list in the browse item (artist, album, etc.) currently selected. The number of songs to be skipped is determined by the ratio of the total number of songs in the list which is selected. 1 Enter Music Search mode 1 Enter Music Search mode Press the [ ] button. “MUSICSEARCH” is displayed. Press the [ ] button.
Function of iPod source Function of iPod source Direct Search Related Search Searching for music by selecting a browse item and an alphabetic character(s). Browsing for music of the same artist or genre as the one being played. 1 Enter Music Search mode 1 Enter Music Search mode Press the [ ] button. “MUSICSEARCH” is displayed. Press the [ ] button. “MUSICSEARCH” is displayed. 2 Enter Search select mode 2 Enter Search select mode Press the [ ] button.
Music disc/Audio file Operation Function of iPod source My Playlist for iPod 3 Turn the Control knob to select “One” or “All”, and then press the [ENTER] button. Selecting “All” deletes all songs. You can register your favorite songs to make a playlist. You can register up to ten songs in the playlist. 4 Turn the Control knob to select “YES”, and then Registering a song in the playlist ⁄ 1 Play the song you want to register Push the Control knob towards up, down, right, and left.
Tuner Operation Station Preset Memory Preset Tuning Putting a station in the memory. Recalling the stations in the memory. 1 Select the frequency to put in the memory 1 Enter Preset Tuning mode Push the Control knob towards right or left. 2 Enter Preset Memory mode Press the [ ] button. 3 Preset the station Turn the Control knob to select preset number (“P1” – “P6”), and then press the [ENTER] button for at least 2 seconds. Press the [ ] button.
Tuner Operation PTY (Program Type) Program Type Preset Selecting the Program Type below and searching for a station; Putting the Program Type in the Preset button memory and quick recall.
Favorite Control Favorite Preset Memory Favorite Preset Recall You can register frequently used items such as broadcast stations, iPod Playlist or Artists, Function setting items, or Audio control items. Retrieving an item registered to Favorite.
Function setting Configure the functions of this unit using the following procedure: Function item 1 Search for the item to set Example: No. Function name: “Display of each function on this unit” ➤ “Setting value 1”*, “Setting value 2”... Provides a functional overview of the function item. The source that displays this function can be found according to the numbers (00) in (page 20). Pick up the item to set according to (page 16).
Display Control Display & Illumination Settings 08 Display Type Selection: “Display Control” ➤ 5 types Sets the display pattern. Display type Display information Type A Displays 2 lines of text. Type B Displays a line of text. Type C Displays the status. Type D Displays the clock. Type E Displays the spectrum analyzer. 16 Faceplate Color Settting: “Color SEL” Sets the faceplate illumination color. Refer to (page 23). Function of KDC-BT50U/ KDC-5047U.
Function setting Tuner Settings iPod Settings 24 Local Seek: “Local Seek” ➤ “ON”, “OFF” Only stations whose reception is good are searched in auto seek tuning. 25 Seek Mode: “Seek Mode” ➤ “Auto1”, ”Auto2”, ”Manual” Selects the tuning mode of the radio. 32 Skip Search: “Skip Search” ➤ “0.5%”, “1%”, “5%”, “10%” Sets the ratio of skip performed with (page 10). 33 My Playlist Delete: “My Playlist Delete” Deletes the songs registered in My Playlist.
41 42 43 44 45 60MIN: Turns the power OFF after 60 minutes. Function of the KDC-BT50U/ KDC-5047U. Built in AUX: “Built-in AUX” ➤ “ON”, “OFF” Sets whether to display AUX during source selection. CD Read: “CD Read” ➤ “1”, ”2” Sets the method for reading CD. When unable to play special format CD, set this function to “2” to force playing. Note that some music CDs may be unplayable even when set to “2”. In addition, audio files cannot be played when set to “2”. Normally, keep this set to “1”.
Function setting 58 Setting the Time Interval for Automatic Answer: “Auto Answer” ➤ ”OFF”, “0SEC” – “8SEC” – “99SEC” This function automatically answers (responds to) a call after lapse of the preset time interval for automatic answer. “OFF” : Does not answer the phone call automatically. “0” : Automatically answers the phone call at once. “1s” – “99s” : Automatically answers the phone call after lapse of 1 – 99 seconds.
Function items that appear during playback of a CD, audio file, or iPod Function item list “Audio Control” “Play Mode” “Hands Mode” (iPod) “Track Scan” (CD)/ “File Scan” (Audio file) “Disc Random” (CD)/ “Folder Random” (Audio file/ iPod) “All Random” (iPod) “Track Repeat” (CD)/ “File Repeat” (Audio file/ iPod) “Disc Repeat” (CD changer)/ “Folder Repeat” (Audio file) “MGZN Random” (Disc changer) “Settings” “Skip Search” (iPod/ Music Editor media) “My Playlist Delete” (iPod) “RDS Settings” “News Interrupt” “A
Display Settings Selecting Display Type Selecting Text Display Shown below are examples of display types. Changes displayed information on each of the following sources: Display Type A Type B Type C Type D Type E Display Type Displays 2 lines of text. Displays a line of text. Displays the status (ON/OFF indicator for each function). Displays the clock. Displays the spectrum analyzer. 1 Enter Display control mode KDC-5047U KMR-440U Press the [DISP] button. KDC-BT50U 1) Press the [FNC] button.
In Standby/ Auxiliary input source Information Display Source name “Source Name” Spectrum analyzer & Clock (AUX only) “Speana/Clock” Clock (Standby only) “Clock” Date “Date” Displays the status (Type A display only) “Indicator” Blank “Blank” 1 Enter Display control mode KDC-5047U KMR-440U Press the [DISP] button. KDC-BT50U 1) Press the [FNC] button. 2) Turn the Control knob to select “Display Control”, and then press the [ENTER] button.
Function of KDC-BT50U/ KCA-BT200 (Optional Accessory) Operation of hands-free phoning Before Use 4 Search for the Name • For details on the Bluetooth cell-phone with the hands-free function, see (page 35). • You need to register your cell-phone before using it with this unit. For more details, see (page 28). • If you have registered two or more cell-phones, you need to select one of them.
Calling a number in the call log 1 Enter Bluetooth mode KDC-BT50U Press the [ ] button. KDC-5047U KMR-440U KDC-5047U KMR-440U Press the [ENTER] button. ⁄ • You need to register the preset dial number. Refer to (page 25). Press the [FNC] button for at least 1 second. “BT MODE” is displayed. 2 Select the call log mode Turn the Control knob to select “Incoming Calls”, “Outgoing Calls”, or “Missed Calls”, and then press the [ENTER] button.
Function of KDC-BT50U/ KCA-BT200 (Optional Accessory) Operation of hands-free phoning Call waiting Function of KCA-BT200 (Optional Accessory) Answering Another Incoming Call with the Current Call Suspended 1 Enter Bluetooth mode KDC-BT50U Press the [ ] button. KDC-5047U KMR-440U 1) Press the [FNC] button for at least 1 second. 2) Turn the Control knob to select “Answer”, and then press the [ENTER] button. Answering another Incoming Call after Terminating the Current Call Press the [SRC] button.
Function of KDC-BT50U/ KCA-BT200 (Optional Accessory) Bluetooth Audio Operation Before Use • For details on the Bluetooth Audio player which can be connected, see (page 35). • You need to register your Bluetooth Audio player before using it with this unit. For more details, see (page 28). • You need to select the Bluetooth audio player you wish to connect. Refer to (page 30).
Function of KDC-BT50U/ KCA-BT200 (Optional Accessory) Bluetooth Setup Registering Bluetooth device To make your Bluetooth device (cell-phone) usable with this unit, you need to register it (pairing). You can register up to five Bluetooth devices to this unit. When registering from Bluetooth devices 1 Turn on the this unit. 2 Start registering a unit by operating the Bluetooth device By operating the Bluetooth device, register the hands-free unit (pairing).
name, and then press the [ENTER] button. If “Completed” is displayed, registration is completed. 5 Go through the procedure of (page 28) and complete the registration (pairing). Cancelling Bluetooth mode Press the [FNC] button. ⁄ • If the device name is not in the list, select “Other Phones”. Registering PIN Code By operating the Bluetooth device, specify the PIN code necessary for registering this unit.
Function of KDC-BT50U/ KCA-BT200 (Optional Accessory) Bluetooth Setup Selecting the Bluetooth device You Wish to Connect Deleting a Registered Bluetooth device When two or more Bluetooth devices have already been registered, you need to select the Bluetooth device you wish to use. You can delete a registered Bluetooth device. 1 Enter Bluetooth mode KDC-BT50U Press the [ KDC-BT50U Press the [ ] button. KDC-5047U KMR-440U ] button. KDC-5047U KMR-440U Press the [FNC] button for at least 1 second.
Displaying the Firmware Version Display the version of the firmware of this unit. 1 Enter Bluetooth mode KDC-BT50U Press the [ ] button. KDC-5047U KMR-440U Press the [FNC] button for at least 1 second. “BT MODE” is displayed. 2 Enter Function setting mode Press the [FNC] button. 3 Select Bluetooth Firmware update mode The item can be selected and determined as follows. ”Settings” ➜ “Detailed Settings” ➜ “BT F/W Update” To select the item, turn the Control knob.
Function of KDC-BT50U/ KCA-BT200 (Optional Accessory) Bluetooth Setup Function of KCA-BT200 (Optional Accessory) Setting a Voice Command for Category Add a voice tag to the phone number category (type) for voice calling. 1 Enter Bluetooth mode Press the [FNC] button for at least 1 second. “BT MODE” is displayed. 2 Enter Function setting mode Press the [FNC] button. 3 Select Phone Number type edit mode The item can be selected and determined as follows.
Function of KDC-BT50U/ KCA-BT200 (Optional Accessory) SMS (Short Message Service) Displaying the SMS Downloading the SMS The SMS received by the cell-phone is displayed on the receiver. A newly received message is displayed. Download the short message (SMS) received by the cell-phone so that it can be read on this unit. ¤ 1 Enter Bluetooth mode KDC-BT50U • To prevent car accidents, the driver should not read the SMS while driving. Press the [ When a new message arrives “SMS Received” is displayed.
Appendix About Audio file • Playable Audio file AAC-LC (.m4a), MP3 (.mp3), WMA (.wma) • Playable disc media CD-R/RW/ROM • Playable disc file format ISO 9660 Level 1/2, Joliet, Romeo, Long file name. • Playable USB device USB mass storage class • Playable USB device file system FAT16, FAT32 Even if the audio files comply with the standards listed above, the play may be impossible depending on the types or conditions of media or device.
About “KENWOOD Music Editor” • This unit supports the PC application “KENWOOD Music Editor Lite ver1.0” or later. • When you use the audio file with database information added by the “KENWOOD Music Editor Lite ver1.0”, you can search a file by title, album or artist name using the (page 9). • In the Instruction manual, the term “Music Editor media” is used to mean the device that contains audio files with database information added with KENWOOD Music Editor. • “KENWOOD Music Editor Lite ver1.
Troubleshooting Guide Some functions of this unit may be disabled by some settings made on this unit. ! • Cannot set up Display. ▲ 47 Demo Mode of (page 16) is not set to Off. ! • Cannot set up the subwoofer. • Cannot set up the low pass filter. • No output from the subwoofer. ▲ “SubWoofer” of (page 7) is not set to On. ! Cannot set up the subwoofer Phase. ▲ “LPF SubWoofer ADJ” of (page 7) is set to “Through”.
No Music Data/Error 15: • The connected USB device contains no playable audio file. • Media was played that does not have data recorded that the unit can play. Too Long: No Message: No short message in In Box. USB ERROR: No Record: The voice tag is not registered in the phonebook. Memory Full: The number of voice tags reaches the maximum number to be registered in the phonebook. iPod Error: Some trouble may have occurred to the connected USB device.
Specifications FM tuner section Frequency range (50 kHz step) : 87.5 MHz – 108.0 MHz Usable sensitivity (S/N = 26dB) : 0.7 μV/75 Ω Quieting Sensitivity (S/N = 46dB) : 1.6 μV/75 Ω Frequency response (±3.
Auxiliary input Frequency response (±3 dB) : 20 Hz – 20 kHz Input Maximum Voltage : 1200 mV Input Impedance : 10 kΩ General Operating voltage KDC-BT50U : 14.4 V (10.5 – 16V allowable) KDC-5047U/ KMR-440U : 14.4 V (11 – 16V allowable) Maximum Current consumption : 10 A Installation Size (W x H x D) : 182 x 53 x 155 mm Weight : 1.3 kg Specifications subject to change without notice.
This Product is not installed by the manufacturer of a vehicle on the production line, nor by the professional importer of a vehicle into an EU Member State. Information on Disposal of Old Electrical and Electronic Equipment and Batteries (applicable for EU countries that have adopted separate waste collection systems) roducts and batteries with the symbol (crossed-out P wheeled bin) cannot be disposed as household waste.
Declaration of Conformity with regard to the EMC Directive 2004/108/EC Magyar For KDC-BT50U: Declaration of Conformity with regard to the R&TTE Directive 1999/5/EC Svenska Manufacturer: Kenwood Corporation 2967-3 Ishikawa-machi, Hachioji-shi, Tokyo, 192-8525 Japan EU Representative's: Kenwood Electronics Europe BV Amsterdamseweg 37, 1422 AC UITHOORN, The Netherlands • Alulírott, Kenwood, kijelenti, hogy a jelen KDC-BT50U megfelel az 1999/5/EC irányelvben meghatározott alapvető követelményeknek és eg