Marine iPod/USB Receiver KMR-700U INSTRUCTION MANUAL © B64-4412-00/00 (MW) B64-4412-00_00_KMR-700U_M_en.indd 1 09.5.
Contents Before use Getting Started 3 4 Connecting iPod or USB device Removing iPod or USB device Clock & Date Adjustment Basic Operation 6 General functions Tuner functions iPod & USB device play functions 8 Display Settings 9 Display Type Selection Display Side Selection Text Display Selection Auxiliary Input Display Setting 11 12 Drive Search Music Search Music Search for iPod Searching for Music by Initial Related Search Audio Adjustments Backup memory delete 2 | Operation of Bluetooth u
Before use 2WARNING To prevent injury or fire, take the following precautions: • To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit. ¤ CAUTION • This unit, except for the panel, and Hideaway Unit are not provided with waterproof feature. Install this unit, except for the panel, and the hideaway unit to the water-free place. Water may get inside the unit when the panel is open.
Getting Started Connecti Conn Co ting i iiP Pod d or U US SB d SB deviice ⁄ 1 Press the Release button. • Be sure to use the cushion bag which protects iPod or USB device against shock. • Do not overload the opened faceplate. If you do so, the faceplate may be damaged. Release button 6 Close the faceplate. Pull the faceplate open, while supporting it with your hand. 2 Remove the terminal cover.
Clock Cloc Cl k & Datte A Adj djusttmentt dj 11 Select the “Date Mode” display Turn the [VOL] knob. 12 Enter Date format mode Press the [ENTER] button for at least 1 second.. The date is displayed. 13 Select Date format Turn the [VOL] knob. Select from 7 types. 1 Turn the power ON Press the [ 14 Exit Menu mode Press the [ ] button twice. ] button. 2 Enter Menu mode Press the [ ] button for at least 1 second. “MENU” is displayed.
Basic Operation [VOL] [ ] [DISP] [2ZONE] [MUTE] [ ] Release [ ] [ ] [ENTER] [ ] [1] [2] [3] General functions Power button: [ ] Power turns ON and OFF each time this button is pressed. [TUN] [iPod] [AUX] [4] [5] [6 ] [ ] Text/Title scroll: [DISP] Scrolls the text display when pressed for at least 1 second. Drop open the faceplate: Release Volume control: [VOL] knob Turn the knob to adjust the volume. Volume mute: [MUTE] Volume returns to the original level, when this button is pressed again.
Tuner functions FM band: [u] Switches between FM1, FM2, and FM3 each time the [u] button is pressed. AM band: [d] Switches to AM. Tuning: [ ]/ [ ] Changes the frequency. ⁄ • Use the “Seek Mode” in
Menu System Set up the following functions. Item “Skip Search” “Beep” “Clock Adjust” “Date Adjust” “Date Mode” “ILM Dimmer” “ILM Effect” Setting Entry Setting overview Sets the ratio of skip performed with . “0.5%”*/ “1%”/ “5%”/ “10%” Setting the operation check sound (beep sound) ON/OFF. “OFF”/ “ON”* — 1 sec. Sets the clock. — 1 sec. Sets the date. — 1 sec. Sets the date display format.
Display Settings Display Type Selection Display Side Selection Shown below are examples of display types. Setup the left side of the display. Display “TYPE [A]” “TYPE [B]” 1 Enter Display setup mode “TYPE [C]” “TYPE [D]” Display Type Displays 4 lines of text. Displays 3 lines of text and the status (ON/OFF indicator for each function). Displays 3 lines of text. Displays 2 lines of text and the status (ON/OFF indicator for each function). 1 Enter Display setup mode Press the [DISP] button.
Display Settings Text Display Selection The following display text appears differently depending on display type setting; In Tuner source Information Frequency Clock Date Display off Display (TypeA,B/ C,D) “Frequency”/ “FREQ” “Clock”/ “Clock” “Date”/ “Date” “Blank”/ “Blank” In iPod/ USB source Information Music title & Artist name Album name & Artist name Folder name File name Play time & Music number Clock Date Display off Display (TypeA,B/ C,D) “Title/Artist”/ “Title” “Album/Artist”/ “Album” “Folder N
Tuner Operation Auto memory entry Frequency Step Setting Putting stations with good reception in the memory automatically. Changing the tuning frequency step. The original setting is FM band 50 kHz, and AM band 9 kHz. 1 Select Auto memory item Select the “Auto Memory” display. For how to select Menu items, refer to
iPod/USB device Operation Drive Search ⁄ Selecting the device inserted in the Multi Card Reader. • Music Search cannot be performed during Random play. 1 Put the playback to pause Press the [1] button. Function of iPod source Music Search for iPod 2 Select a device Press the [u] or [d] button. 3 Restart playback Press the [1] button. ⁄ • This unit is compliant with Multi Card Readers with a maximum of 4 slots.
Function of iPod source Function of iPod source Searching for Music by Initial Related Search You can select an alphabetic character from the list in the browse item (artist, album, etc.) selected now. Browses for music of the same artist or genre as the one being played. 1 Enter Search mode 1 Enter Related Search mode Press the [ ] button. 2 Enter Music search mode Turn the [VOL] knob. Displays the current music name. 3 Start the alphabet search Press the [ ] button for at least 1 second.
Audio Adjustments Audio Control Treble level You can adjust following Audio Control items; Adjustment Item Treble Center Frequency Adjustment Item Rear volume Subwoofer level System Q Bass level Middle level Treble level Balance Fader Display “Rear volume” “Sub-W Level” “User”, “Rock”, “Pops”, “Easy”, “Top40”, “Jazz”, “Game”, “Natural” “Bass Level” “Middle Level” “Treble Level” “Balance” “Fader” Range 0 — 35 –15 — +15 User setting, Rock, Pops, Easy, Top 40, Jazz, Game, Natural –8 — +8 –8 — +8 –8 — +8
4 Adjust the Audio setup item Press the [ ] or [ ] button. 5 Exit Audio Setup mode Press the [ENTER] button. Audio Preset Recall Recalling the sound setup registered by
Audio Adjustments Other Functions Dual zone control Backup memory delete Outputs sounds from different sources to the front and rear channels. Also sets the source for each channel. Initializes the settings of “MENU”, etc. 1 Enter Dual zone control mode Press the [2ZONE] button. 2 Switch Dual Zone ON/OFF Turn the [VOL] knob. To switch the dual zone function to ON, select “2ZONE: ON”. 3 Select the channel to set the source Press [d] button, and then press [ ] or [ ] button.
Favorite Control Favorite Preset Recall Favorite Preset Memory Retrieving an item registered to Favorite. Registering the operation procedure to select your favorite broadcast station or iPod Playlists/ Artists, etc. 1 Display a favorite item Source TUNER iPod Hands-free phone 1st hierarchy 2nd hierarchy 3rd hierarchy PLAYLISTS ARTISTS ALL ARTISTS ALBUMS ARTISTS 1 ARTISTS 2 ALL ALBUMS ARTISTS 3 ALBUM 1 ALBUM 2 COMPOSERS Press the [ ] button. “SEARCH/FAVORITE” is displayed.
Favorite Control Favorite Name Setting Giving a name to Preset Memory registered to Favorite. 1 Enter Search mode (In iPod/USB source only) Press the [ ] button. “SEARCH/FAVORITE” is displayed. 2 Enter Favorite mode Press the [ ] button. Registered favorite items are displayed. 3 Select the number you want to Name set Turn the [VOL] knob. 4 Enter Favorite name set mode Press the [DISP] button for at least 1 second. Select the “FAVORITE NAME SET” display.
Remote control (Optional accessory) setup Remote control ID setup Remote control ID delete When connecting the remote control KCA-RC107MR (Optional accessory) to this unit, you should register the ID for KCA-RC107MR. Delete the ID registered for the remote control KCARC107MR (optional accessory). 1 Enter Remote control setup mode Press the [2ZONE] button for at least 1 second. 2 Select the Remote control ID setup item Turn the [VOL] knob to select “Remote ID Set”, and then press the [ENTER] button.
Operation of Bluetooth unit (Optional accessory) About Bluetooth unit (Optional accessory) Connecting Bluetooth unit KCA-BT200 (optional accessory) to this unit allows you to make a call with hands-free phone or control audio devices via Bluetooth communication. For procedural steps, refer to the description in the Model-C group of the operation manual attached to Bluetooth unit KCA-BT200. Except that the following steps are different from those in the Bluetooth unit KCA-BT200 operation manual.
Appendix Operation on voice dialing call 1 Enter Bluetooth menu mode Press the [MUTE] button for at least 1 second. 2 Select the voice dialing call mode item Turn the [VOL] knob. Select the “Voice Recognize” display. 3 Enter voice dialing call mode Press the [ENTER] button. “Ready?” is displayed. 4 Make voice recognition for the name Press the [ENTER] button and then utter the name. “PB Name?” is displayed. When a beep is heard, utter the name within 2 seconds.
Appendix iPod/iPhone that can be connected to this unit Made for • iPod nano (1st generation) • iPod nano (2nd generation) • iPod nano (3rd generation) • iPod nano (4th generation) • iPod with video • iPod classic • iPod touch (1st generation) • iPod touch (2nd generation) Works with • iPhone • iPhone 3G • Update iPod/iPhone software to the latest version. ⁄ • If you start playback after connecting the iPod, the music that has been played by the iPod is played first.
Accessories/ Installation Procedure Accessories 2WARNING If you connect the ignition wire (red) and the battery wire (yellow) to the negative ground point, you may cause a short circuit, that in turn may start a fire. Always connect those wires to the power source running through the fuse box. 1 ..........1 2 ..........1 3 ..........7 4 ..........2 5 ..........1 6 ..........1 Installation Procedure 1. To prevent a short circuit, remove the key from the ignition and disconnect the - battery. 2.
Connecting Wires to Terminals Clamper (Accessory6) I/F cable (Accessory2) Main unit To Bluetooth unit* To Remote control* KCA-RC107MR (Optional accessory; Maximum of 3 remote controls) *Terminals are provided with covers. Remove the cover from the terminal before connecting it to the cable. REMOTE CONTROL KAB I/F HEAD UNIT PRE OUT ANTENNA Secure the I/F cable (Accessory 2) with a clamper.
Installation Main unit Installation 1 Attach the template (accessory 5) at the 2 Hideaway unit Installation Tapping screw (φ4 x 16 mm) (Accessory4) installation position. Tap holes (main unit mounting hole x 1, screw holes x 7) on the mounting surface based on the template (accessory 5). Mounting surface 91.0 79.0 91.0 79.0 36.0 8.5 36.0 ⁄ 66.0 52.0 • Install the hideaway unit in a place free from water exposure.
Troubleshooting Guide Some functions of this unit may be disabled by some settings made on this unit. ! ! • Cannot set up the subwoofer. • Cannot set up the low pass filter. • No output from the subwoofer. ▲ • of (page 6) is not set to On. • Cannot set up the subwoofer. • Cannot set up the High Pass Filter. • Cannot set up the Fader. • No Audio control effect on AUX. • Cannot set up the subwoofer position of Manual position setting.
The messages shown below display your systems condition. Protect (Blink): The speaker wire has a short-circuit or touches the chassis of the vehicle, and then the protection function is activated. ➪ Wire or insulate the speaker cable properly and press the reset button. If the “Protect” code does not disappear, consult your nearest service center. Unsupported File: An Audio file is played with a format that this unit can’t support. REMO ERROR: Some trouble may have occurred to the connected Remoto control.
Specifications FM tuner section Frequency range 200 kHz space : 87.9 MHz – 107.9 MHz 50 kHz space : 87.5 MHz – 108.0 MHz Usable sensitivity (S/N = 30dB) : 9.3dBf (0.8 μV/75 Ω) Quieting Sensitivity (S/N = 50dB) : 15.2dBf (1.