Marine iPod/USB Receiver KMR-700U INSTRUCTION MANUAL Take the time to read through this instruction manual. Familiarity with installation and operation procedures will help you obtain the best performance from your new Marine iPod/USB Receiver. For your records Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below.
Contents Before use Getting Started 3 4 Connecting iPod or USB device Removing iPod or USB device Clock & Date Adjustment Basic Operation 6 General functions Tuner functions iPod & USB device play functions 8 Display Settings 9 Display Type Selection Display Side Selection Text Display Selection Auxiliary Input Display Setting 11 12 Drive Search Music Search Music Search for iPod Searching for Music by Initial Related Search Audio Adjustments Satellite Radio tuner control (Optional accessory) 1
Before use 2WARNING To prevent injury or fire, take the following precautions: • To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit. How to reset your unit • If this unit or the connected unit fails to operate properly, press the Reset button. The unit returns to factory settings when the Reset button is pressed. Reset button Cleaning the Unit If the faceplate of this unit is stained, wipe it with a dry soft cloth such as a silicon cloth.
Getting Started Connecti Conn Co ting i iiP Pod d or U US SB d SB deviice ⁄ 1 Press the Release button. • Be sure to use the cushion bag which protects iPod or USB device against shock. • Do not overload the opened faceplate. If you do so, the faceplate may be damaged. Release button 6 Close the faceplate. Pull the faceplate open, while supporting it with your hand. 2 Remove the terminal cover.
Clock Cloc Cl k & Datte A Adj djusttmentt dj 11 Select the “Date Mode” display Turn the [VOL] knob. 12 Enter Date format mode Press the [ENTER] button for at least 1 second.. The date is displayed. 13 Select Date format Turn the [VOL] knob. Select from 7 types. 1 Turn the power ON Press the [ 14 Exit Menu mode Press the [ ] button twice. ] button. 2 Enter Menu mode Press the [ ] button for at least 1 second. “MENU” is displayed.
Basic Operation [VOL] [ ] [DISP] [2ZONE] [MUTE] [ ] Release [ ] [ ] [ENTER] [ ] [1] [2] [3] General functions Power button: [ ] Power turns ON and OFF each time this button is pressed. Volume control: [VOL] knob Turn the knob to adjust the volume. [TUN] [iPod] [AUX] [4] [5] [6 ] [ ] Switching display: [DISP] Changing the information displayed. Refer to (page 9). Text/Title scroll: [DISP] Scrolls the text display when pressed for at least 1 second.
Tuner functions FM band: [u] Switches between FM1, FM2, and FM3 each time the [u] button is pressed. AM band: [d] Switches to AM. Tuning: [ ]/ [ ] Changes the frequency. ⁄ • Use the “Seek Mode” in
Menu System Set up the following functions. Item “Skip Search” “Beep” “Clock Adjust” “Date Adjust” “Date Mode” “ILM Dimmer” “ILM Effect” Setting Entry Setting overview Sets the ratio of skip performed with . “0.5%”*/ “1%”/ “5%”/ “10%” Setting the operation check sound (beep sound) ON/OFF. “OFF”/ “ON”* — 1 sec. Sets the clock. — 1 sec. Sets the date. — 1 sec. Sets the date display format.
Display Settings Display Type Selection Display Side Selection Shown below are examples of display types. Setup the left side of the display. Display “TYPE [A]” “TYPE [B]” 1 Enter Display setup mode “TYPE [C]” “TYPE [D]” Display Type Displays 4 lines of text. Displays 3 lines of text and the status (ON/OFF indicator for each function). Displays 3 lines of text. Displays 2 lines of text and the status (ON/OFF indicator for each function). 1 Enter Display setup mode Press the [DISP] button.
Display Settings Text Display Selection The following display text appears differently depending on display type setting; In Tuner source Information Frequency Clock Date Display off Press the [u] or [d] button. The selected text display part blinks. 5 Select the Display text Display (TypeA,B/ C,D) “Frequency”/ “FREQ” “Clock”/ “Clock” “Date”/ “Date” “Blank”/ “Blank” Tune the [VOL] knob. 6 Exit Display text select mode Press the [DISP] button.
Tuner Operation Auto memory entry Putting stations with good reception in the memory automatically. 1 Select Auto memory item Select the “Auto Memory” display. For how to select Menu items, refer to
iPod/USB device Operation Drive Search ⁄ Selecting the device inserted in the Multi Card Reader. • Music Search cannot be performed during Random play or scan play. 1 Put the playback to pause Press the [1] button. Function of iPod source 2 Select a device Press the [u] or [d] button. 3 Restart playback Music Search for iPod Search for the song (in iPod) you want to play. Press the [1] button. ⁄ • This unit is compliant with Multi Card Readers with a maximum of 4 slots.
Function of iPod source Function of iPod source Searching for Music by Initial Related Search You can select an alphabetic character from the list in the browse item (artist, album, etc.) selected now. Browses for music of the same artist or genre as the one being played. 1 Enter Search mode 1 Enter Related Search mode Press the [ ] button. 2 Enter Music search mode Turn the [VOL] knob. Displays the current music name. 3 Start the alphabet search Press the [ ] button for at least 1 second.
Audio Adjustments Audio Control Treble level You can adjust following Audio Control items; Adjustment Item Treble Center Frequency Adjustment Item Rear volume Subwoofer level System Q Bass level Middle level Treble level Balance Fader Display “Rear volume” “Sub-W Level” “User”, “Rock”, “Pops”, “Easy”, “Top40”, “Jazz”, “Game”, “Natural” “Bass Level” “Middle Level” “Treble Level” “Balance” “Fader” Range 0 — 35 –15 — +15 User setting, Rock, Pops, Easy, Top 40, Jazz, Game, Natural –8 — +8 –8 — +8 –8 — +8
4 Adjust the Audio setup item Press the [ ] or [ ] button. 5 Exit Audio Setup mode Press the [ENTER] button for at least 1 second. Audio Preset Recall Recalling the sound setup registered by
Audio Adjustments Other Functions Dual zone control Backup memory delete Connecting USB or iPod to the unit when the dual zone function is set to on, the front and rear channels are switched to the USB/iPod source. Initializes the settings of “MENU”, etc. 1 Enter Dual zone control mode Press the [2ZONE] button. 2 Switch Dual Zone ON/OFF Turn the [VOL] knob. To switch the dual zone function to ON, select “2ZONE: ON”.
Favorite Control Favorite Preset Memory Favorite Preset Recall Registering the operation procedure to select your favorite broadcast station or iPod Playlists/ Artists, etc. Retrieving an item registered to Favorite. 1 Display a favorite item Source TUNER/SIRIUS iPod Setting Item Preset Memory. Refer to (page 7). List selection screen for Playlists/ Artists/ Albums, etc. Refer to (page 12). “ FAV ” is displayed when the operation procedure can be registered.
Favorite Control Favorite Name Setting Giving a name to Preset Memory registered to Favorite. 1 Enter Search mode (In iPod/USB/SIRIUS source only) Press the [ ] button. “SEARCH/FAVORITE” is displayed. 2 Enter Favorite mode Press the [ ] button. Registered favorite items are displayed. 3 Select the number you want to Name set Turn the [VOL] knob. 4 Enter Favorite name set mode Press the [DISP] button for at least 1 second. Select the “Favorite Name Set” display.
Satellite Radio tuner control (Optional accessory) Basic Operation Category and Channel Search Selecting Satellite Radio source Press the [TUN] button. Select the “SIRIUS” display. ⁄ 1 Enter Category and Channel Search mode Press the [ • You need to register to the service provider to receive the service by Satellite Radio. Consult the service provider if “CALL … TO SUBSCRIBE” appears. • The radio may take a little time to start receiving after you select the Satellite Radio source.
Remote control (Optional accessory) setup Remote control ID setup Remote control ID delete When connecting the remote control KCA-RC107MR (Optional accessory) to this unit, you should register the ID for KCA-RC107MR. Delete the ID registered for the remote control KCARC107MR (optional accessory). 1 Enter Remote control setup mode Press the [2ZONE] button for at least 1 second. 2 Select the Remote control ID setup item Turn the [VOL] knob to select “Remote ID Set”, and then press the [ENTER] button.
Appendix About Audio file • Playable Audio file AAC-LC (.m4a), MP3 (.mp3), WMA (.wma), WAV (.wav) • Playable USB device USB mass storage class • Playable USB device file system FAT16, FAT32 Although the audio files are complied with the standards listed above, the play maybe impossible depending on the types or conditions of media or device. • Playing order of the Audio file In the example of folder/file tree shown below, the files are played in the order from 1 to 0.
Appendix Menu Glossary • AMP Selecting “OFF” turns off the built-in amplifier. Turning off the built-in amplifier improves the quality of the sound from Preout. • ILM Dimmer Reduces the key Illumination brightness. Auto: Dims the illumination in conjunction with the Light switch of the vehicle. Manual: Dims the illumination constantly. OFF: Does not dim the illumination. • DISP Dimmer Reduces the display Illumination brightness.
Accessories/ Installation Procedure Accessories 2WARNING If you connect the ignition wire (red) and the battery wire (yellow) to the negative ground point, you may cause a short circuit, that in turn may start a fire. Always connect those wires to the power source running through the fuse box. 1 ..........1 2 ..........1 3 ..........7 4 ..........2 5 ..........1 6 ..........1 Installation Procedure 1. To prevent a short circuit, remove the key from the ignition and disconnect the - battery. 2.
Connecting Wires to Terminals Clamper (Accessory6) I/F cable (Accessory2) Main unit To Remote control* KCA-RC107MR (Optional accessory; Maximum of 3 remote controls) *Terminals are provided with covers. Remove the cover from the terminal before connecting it to the cable. To SIRIUS unit* REMOTE CONTROL SIRIUS I/F HEAD UNIT PRE OUT ANTENNA Secure the I/F cable (Accessory 2) with a Clamper (Accessory 6).
Installation Main unit Installation 1 Attach the template (accessory 5) at the 2 Hideaway unit Installation Tapping screw (Φ4 x 16 mm) (Accessory4) installation position. Tap holes (main unit mounting hole x 1, screw holes x 7) on the mounting surface based on the template (accessory 5). Mounting surface 91.0 79.0 91.0 79.0 36.0 8.5 36.0 ⁄ 66.0 52.0 • Install the hideaway unit in a place free from water exposure.
Troubleshooting Guide Some functions of this unit may be disabled by some settings made on this unit. ! ! • Cannot set up the subwoofer. • Cannot set up the low pass filter. • No output from the subwoofer. ▲ • of (page 6) is not set to On. • Cannot set up the subwoofer. • Cannot set up the High Pass Filter. • Cannot set up the Fader. • No Audio control effect on AUX. • Cannot set up the subwoofer position of Manual position setting.
The messages shown below display your systems condition. Protect (Blink): The speaker wire has a short-circuit or touches the chassis of the vehicle, and then the protection function is activated. ➪ Wire or insulate the speaker cable properly and press the reset button. If the “Protect” code does not disappear, consult your nearest service center. Unsupported File: An Audio file is played with a format that this unit can’t support. Copy protection: A copy-protected file is played.
Specifications FM tuner section Frequency range : 87.9 MHz – 107.9 MHz Usable sensitivity (S/N = 30dB) : 9.3dBf (0.8 μV/75 Ω) Quieting Sensitivity (S/N = 50dB) : 15.2dBf (1.6 μV/75 Ω) Frequency response (±3 dB) : 30 Hz – 15 kHz Signal to Noise ratio (MONO) : 70 dB Selectivity (±400 kHz) : ≥ 80 dB Stereo separation (1 kHz) : 40 dB AM tuner section Frequency range (10 kHz space) : 530 kHz – 1700 kHz Usable sensitivity (S/N = 20dB) : 28 dBμ (25 μV) USB Interface USB Standard : USB1.1/ 2.