Owner's Manual

ENGLISH
17
BLUETOOTH®
Improve the voice quality
While talking on the phone...
1 Press the volume knob to enter [ FUNCTION ].
2 Turn the volume knob to select an item (see the following
table), then press the knob.
3 Repeat step 2 until the desired item is selected or activated.
4 Press and hold to exit.
To return to the previous setting item, press
.
Default:
XX
MIC GAIN –10 — +10 ( –4 ):The sensitivity of the microphone increases as
the number increased.
NR LEVEL –5 — +5 ( 0 ):Adjust the noise reduction level until the least noise is
being heard during a phone conversation.
ECHO CANCEL –5 — +5 ( 0 ):Adjust the echo cancellation delay time until the least
echo is being heard during a phone conversation.
Make the settings for receiving a call
1
Press to enter Bluetooth mode.
2 Turn the volume knob to select an item (see the following
table), then press the knob.
3 Repeat step 2 until the desired item is selected or activated.
4 Press and hold to exit.
To return to the previous setting item, press
.
Default: XX
SETTINGS
AUTO ANSWER
1 — 30 :The unit answers incoming call automatically in the selected time
(in seconds).;
OFF :Cancels.
BATT/SIGNAL*
(For / / )
AUTO :Shows the strength of the battery and signal when the unit detects a
Bluetooth device and the Bluetooth device is connected.;
OFF :Cancels. Clock
time is shown.
*
Functionality depends on the type of the phone used.
Make a call
You can make a call from the call history, phonebook, or dialing the number.
Call by voice is also possible if your mobile phone has the feature.
1 Press to enter Bluetooth mode.
2 Turn the volume knob to select an item (see the following table), then
press the knob.
3 Repeat step 2 until the desired item is selected/activated or follow the
instructions stated on the selected item.
4 Press and hold to exit.
To return to the previous setting item, press
.
CALL HISTORY (Applicable only if the phone supports PBAP)
1 Press the volume knob to select a name or a phone number.
•
/ / : “INCOMING”,
“OUTGOING”, or “MISSED” is shown on the lower part of the display to
indicate the previous call status.
/ : “I” indicates call received, “O”
indicates call made, “M” indicates call missed.
• Press
DISP to change the display category (NUMBER or NAME).
• “NO DATA” appears if there is no recorded call history.
2 Press the volume knob to call.
JS_KWD_KDC_BT365U_KN_EN_9.indd 17 18/9/2015 4:17:59 PM