Owner's Manual
Table Of Contents
- Instruction Manual
- Reset
- Bluetooth PIN (0000)
- Clock Set
- Demo Mode
- Attaching / Removing Faceplate
- Initial Settings
- Table of Contents
- Parts & Controls
- Basic Operation
- Getting Started
- Radio Operation
- AUX Input
- CD / USB / iPod / Android Operation
- Pandora
- iHeartRadio
- SiriusXM (KMR-D365BT)
- Bluetooth
- Audio Settings
- Display Settings
- Troubleshooting
- Messages
- Specs
- Installation / Connection
ENGLISH
31
Wiring connection
(for )
Fuse (10๎A)
Rear/ front/ subwoofer output
Antenna terminal
Car fuse box
Car fuse box
Battery
Ignition switch
Blue/White
(Power control wire)
Blue
(Antenna control wire)
Red
(Ignition wire)
Yellow
(Battery wire)
Black (Ground wire)
To the metallic body or chassis of the car
To the power control terminal when using the optional power
amplifier
To the antenna control terminal in the vehicle
Brown
(Mute control wire)
Light blue/yellow
(Marine remote control
wire)
White
Gray
Green
Purple
White/Black
Gray/Black
Green/Black
Purple/Black
To connect the Kenwood navigation system, refer your
navigations manual
To front speaker (left)
To rear speaker (left)
To front speaker (right)
To rear speaker (right)
If no connections are made, do not let the wire come out from the tab.
MIC (Microphone input terminal) (
๎
15
)
Expansion port (12 V
500 mA)
To the optional SiriusXM Vehicle Tuner (commercially available) (
๎
12
)
IMPORTANT :
We recommend installing the unit with a commercially
available custom wiring harness specific for your car and leave this job
to professionals for your safety. Consult your car audio dealer.
When connecting to an external amplifier, connect its ground wire to
the carโs chassis to avoid damaging the unit.
To the remote control, KCA-RC55MR
(optional accessory)
To Kenwood Wired Marine Remote Control unit (optional
accessory)
For the latest information on marine accessories please go to:
http://www.kenwoodusa.com/Car_Entertainment/Marine/
JS_KWD_KDC_BT365U_KN_EN_7.indd 31 26/8/2015 9:51:26 AM