Owner's Manual

4
GETTING STARTED
Select the display language and cancel the demonstration
When you turn on the power for the first time (or [ FACTORY RESET ] is set to
[
YES ],  5 ), the display shows: “SEL LANGUAGE” “PRESS” “VOLUME
KNOB”
1 Turn the volume knob to select [ ENG ] (English) or [ SPA ] (Spanish),
then press the knob.
[
ENG ] is selected for the initial setup.
(For
/ / / )
Then, the display shows: “CANCEL DEMO”
“PRESS” “VOLUME
KNOB”.
2 Press the volume knob.
[
YES ] is selected for the initial setup.
3 Press the volume knob again.
“DEMO OFF” appears.
Set the clock and date
1
Press the volume knob to enter [ FUNCTION ].
2 Turn the volume knob to select [ CLOCK ], then press the knob.
To adjust the clock
3 Turn the volume knob to select [ CLOCK ADJUST ], then press the knob.
4 Turn the volume knob to make the settings, then press the knob.
Hour
Minute
5 Turn the volume knob to select [ CLOCK FORMAT ], then press the knob.
6 Turn the volume knob to select [ 12H ] or [ 24H ], then press the knob.
1
2
To set the date
7 Turn the volume knob to select [ DATE FORMAT ], then press the knob.
8 Turn the volume knob to select [ DD/MM/YY ] or [ MM/DD/YY ], then press
the knob.
9 Turn the volume knob to select [ DATE SET ], then press the knob.
10 Turn the volume knob to make the settings, then press the knob.
Day
Month Year or Month Day Year
11 Press and hold to exit.
To return to the previous setting item, press
.
Set the initial settings
1
Press repeatedly to enter STANDBY.
2 Press the volume knob to enter [ FUNCTION ].
3 Turn the volume knob to select an item (see the following table),
then press the knob.
4 Repeat step 3 until the desired item is selected or activated.
5 Press and hold to exit.
To return to the previous setting item, press
.
Default:
XX
AUDIO CONTROL
SWITCH
PREOUT
(For / )
REAR / SUB-W : Selects whether rear speakers or a subwoofer are
connected to the line out terminals on the rear (through an external
amplifier).
3
JS_KWD_KDC_BT365U_KN_EN_ff.indd 4 12/10/2015 9:30:17 AM