KDC-BT365U KDC-BT265U KDC-X300 KDC-MP365BT KMR-D365BT CD-RECEIVER INSTRUCTION MANUAL AMPLI-TUNER LECTEUR DE CD MODE D’EMPLOI REPRODUCTOR DE DISCOS COMPACTOS RECEPTOR DE FM/AM MANUAL DE INSTRUCCIONES For your records Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your Kenwood dealer for information or service on the product.
CAUTION Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. In compliance with Federal Regulations, following are reproductions of labels on, or inside the product relating to laser product safety. JVC KENWOOD Corporation 2967-3, ISHIKAWA-MACHI, HACHIOJI-SHI, TOKYO, JAPAN THIS PRODUCT COMPLIES WITH DHHS RULES 21CFR SUBCHAPTER J IN EFFECT AT DATE OF MANUFACTURE.
IC (Industry Canada) Notice This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. The term “IC: ” before the certification/ registration number only signifies that the Industry Canada technical specification were met.
SOFTWARE LICENSE AGREEMENT The software embedded in the Product (hereinafter the "Licensed Software") provided by Licensor is copyrighted to or sublicensable by the Licensor, and this Agreement provides for the terms and conditions which Users shall follow in order to use the Licensed Software. The User shall use the Licensed Software by agreeing with the terms of this Software License Agreement.
Article 8 Termination In case the User falls under any of the events described in the following items, the Licensor may immediately terminate this Agreement or claim that the User compensates for the damage incurred by the Licensor due to such event: (1) when the User violated any provision of this Agreement; or (2) when a petition has been filed against the User for an attachment, provisional attachment, provisional disposition or any other compulsory execution.
CONTENTS BEFORE USE BEFORE USE 2 IMPORTANT BASICS 3 GETTING STARTED 4 • To ensure proper use, please read through this manual before using this product. It is especially important that you read and observe Warning and Caution in this manual. • Please keep the manual in a safe and accessible place for future reference.
BASICS Faceplate Remote control (RC-406) Display window Remote sensor (Do not expose to bright sunlight.) Volume knob Loading slot / / : Lights up when Bluetooth connection is established. ( 15) Detach button Attach / / : Flashes when the unit enters searching status. Detach How to reset Pull out the insulation sheet when using for the first time. : Can be remotely controlled with an optionally purchased remote control. : Remote control functions are not available.
GETTING STARTED 1 Select the display language and cancel the demonstration When you turn on the power for the first time (or [FACTORY RESET] is set to [YES], 5), the display shows: “SEL LANGUAGE” “PRESS” “VOLUME KNOB” 1 Turn the volume knob to select [ENG] (English) or [SPA] (Spanish), then press the knob. [ENG] is selected for the initial setup. (For / / / ) Then, the display shows: “CANCEL DEMO” “PRESS” “VOLUME KNOB”. 2 Press the volume knob. [YES] is selected for the initial setup.
GETTING STARTED DISPLAY EASY MENU REM SETTING* (for (For / / ) ON: Both display and button illumination change to white color when entering [FUNCTION]. ; OFF: Both display and button illumination remain as [COLOR SELECT] color. ( 23) REMOTE ID SET Remote control ID list is displayed. YES: Indicates that this ID is already registered. ; NO: Indicates that this ID is available. Turn the volume knob to select an available ID (REM ID1/ ID2/ ID3), then press the knob to register.
RADIO Other settings 1 Press the volume knob to enter [FUNCTION]. 2 Turn the volume knob to select an item (see the following table), then press the knob. 3 Repeat step 2 until the desired item is selected or activated. 4 Press and hold to exit. To return to the previous setting item, press Search for a station repeatedly to select TUNER. 1 Press 2 Press repeatedly (or press / Default: XX on RC-406) to select FM1/ FM2/ FM3/ AM. 3 Press S / T (or press S / . on RC-406) to search for a station.
RADIO AUX CLOCK Preparation: Select [ON] for [BUILT-IN AUX]. ( 5) TIME SYNC ON: Synchronizes the unit’s time to the Radio Broadcast Data System/ Radio Data System station time. ; OFF: Cancels.
CD / USB / iPod / ANDROID Start playback The source changes automatically and playback starts. M Eject disc Label side USB input terminal USB CA-U1EX (max.: 500 mA) (optional accessory) To On the faceplate On the remote control Playback / pause Press Press Reverse / Fast-forward*4 Press and hold S / T. Press and hold S / Select a track/file Press S / T. Press S / Select a folder*5 Press J / K. Press Repeat play*6 Press repeatedly.
CD / USB / iPod / ANDROID Select control mode While in IPOD source, press 5 repeatedly. MODE ON : Control iPod using the iPod itself. However, you can still play/pause, file skip, fast-forward or reverse from this unit. MODE OFF : Control iPod from this unit. While in ANDROID source, press 5 repeatedly. BROWSE MODE : Control Android device from this unit via KENWOOD MUSIC PLAY application installed in the Android device.
CD / USB / iPod / ANDROID Pandora® (for Direct Music Search (using RC-406) 1 Press DIRECT. 2 Press the number buttons to enter a track/file Preparation: Install the latest version of the Pandora application on your device (iPhone/ iPod touch), then create an account and log in to Pandora. • Select [ON] for [PANDORA SRC]. ( 5) / / / ) number. Start listening 1 Open the Pandora application on your device. 2 Connect your device to the USB input terminal. 3 Press to search for music. or DIRECT.
Pandora® (for / / / iHeartRadio® (for ) Search for a registered station . 1 Press 2 Turn the volume knob to select an item, then press the knob. [SORT BY DATE]: According to the registered date [SORT BY A-Z]: Alphabetical order 3 Turn the volume knob to select the desired station, then press the knob. To cancel, press and hold . (or using RC-406) . Press J / K to search for a station, then press Delete a station While listening to PANDORA... 1 Press the volume knob to enter [FUNCTION].
iHeartRadio® (for / / / ) Search and store a station . 1 Press 2 Turn the volume knob to select a category, SiriusXM® Radio (for ) Only SiriusXM® brings you more of what you love to listen to, all in one place. Get over 140 channels, including commercial-free music plus the best sports, news, talk, comedy and entertainment. Welcome to the world of satellite radio. A SiriusXM Vehicle Tuner and Subscription are required. For more information, visit www.siriusxm.com. then press the knob.
SiriusXM® Radio (for ) 5 Turn the volume knob to select a channel, then press the knob. (or) Press S / T to search for a channel manually. • Pressing and holding S / T changes the channel rapidly. If a locked channel or a mature channel is selected, a pass code input screen appears. Enter the pass code to receive the channel. ( 14) .
SiriusXM® Radio (for ) Default: XX TuneScan™ You can get a short preview of the songs that you have missed on each of your SmartFavorite music channels or currently tuned music channel. Press and hold to start scanning the first 6 seconds of the recorded music contents. • To listen to the current song, press the volume knob to stop scanning. The unit continues playing the current song. • To select the previous/next song, press S / T. • To cancel scanning, press and hold the volume knob.
BLUETOOTH® BLUETOOTH — Connection Supported Bluetooth profiles – Hands-Free Profile (HFP) – Advanced Audio Distribution Profile (A2DP) – Audio/Video Remote Control Profile (AVRCP) – Serial Port Profile (SPP) – Phonebook Access Profile (PBAP) Supported Bluetooth codecs – Sub Band Codec (SBC) – Advanced Audio Coding (AAC) Connect the microphone Pair and connect a Bluetooth device for the first time to turn on the unit.
BLUETOOTH® BLUETOOTH — Mobile phone To On the faceplate On the remote control Answer a call Press or the volume knob or one of the number buttons (1 to 6). Press . Reject a call Press . Press . End a call Press . Press . Press . First incoming call... While talking on the first incoming call... Receive a call When there is an incoming call: • / / : ZONE 2 illuminates in green color and flashes. • The unit answers the call automatically if [AUTO ANSWER] is set to a selected time.
BLUETOOTH® Default: XX Improve the voice quality While talking on the phone... 1 Press the volume knob to enter [FUNCTION]. 2 Turn the volume knob to select an item (see the following table), then press the knob. 3 Repeat step 2 until the desired item is selected or activated. 4 Press and hold to exit. . To return to the previous setting item, press Default: XX MIC GAIN –10 — +10 (–4): The sensitivity of the microphone increases as the number increased.
BLUETOOTH® PHONE BOOK (Applicable only if the phone supports PBAP) 1 Turn the volume knob quickly to enter alphabet search mode (if the phonebook contains many contacts). The first menu (ABCDEFGHIJK) appears. • To go to the other menu (LMNOPQRSTUV or WXYZ1 ), press J / K. • To select the desired first letter, turn the volume knob or press S / T, then press the knob. Select “1” to search with numbers and select “ ” to search with symbols. 2 Turn the volume knob to select a name, then press the knob.
BLUETOOTH® Other settings 1 Press the volume knob to enter [FUNCTION]. 2 Turn the volume knob to select an item (see the following table), then press the knob. 3 Repeat step 2 until the desired item is selected/activated or follow the instructions stated on the selected item. to exit. To return to the previous setting item, press 4 Press and hold . BT MODE AUDIO SELECT DEVICE DELETE You can check the connectivity of the supported profile between the Bluetooth device and the unit.
BLUETOOTH® BLUETOOTH — Audio Internet radio via Bluetooth (for / / / ) Listen to Pandora You can listen to Pandora on the Android device via Bluetooth on this unit. Preparation: Select [ON] for [PANDORA SRC]. ( 5) 1 Open the Pandora application on your device. 2 Connect your Bluetooth audio player via Bluetooth connection. ( 15) 3 Press repeatedly to select PANDORA. The source switches and broadcast starts automatically. You can operate Pandora in the same way as Pandora for iPod/iPhone.
AUDIO SETTINGS While listening to any source... 1 Press the volume knob to enter [FUNCTION]. 2 Turn the volume knob to select [AUDIO CONTROL], then press the knob. 3 Turn the volume knob to select an item (see the following table), then press the knob. 4 Repeat step 3 until the desired item is selected or activated. 5 Press and hold to exit. (or using RC-406) 1 Press AUD to enter [AUDIO CONTROL]. 2 Press J / K to select an item, then press .
AUDIO SETTINGS DISPLAY SETTINGS X ' OVER (For TWEETER FRONT HPF FRQ 1KHZ/ 1.6KHZ/ 2.5KHZ/ 4KHZ/ 5KHZ/ 6.3KHZ/ 8KHZ/ 10KHZ/ 12.5KHZ: Adjusts the crossover frequency for the tweeter speaker. GAIN LEFT –8 to 0: Adjusts the output volume of the left tweeter. GAIN RIGHT –8 to 0: Adjusts the output volume of the right tweeter. F - HPF FRQ 30HZ/ 40HZ/ 50HZ/ 60HZ/ 70HZ/ 80HZ/ 90HZ/ 100HZ/ 120HZ/ 150HZ/ 180HZ/ 220HZ/ 250HZ: Adjusts the crossover frequency for the selected speakers (high pass filter).
TROUBLESHOOTING Default: XX BRIGHTNESS TEXT SCROLL Dim the display illumination (and button illumination*1). ON: Dimmer is turned on. ; OFF: Cancels. DIMMER TIME: Set the dimmer on and off time. 1 Turn the volume knob to adjust the [ON] time, then press the knob. 2 Turn the volume knob to adjust the [OFF] time, then press the knob. (Default: [ON]: 6:00 PM; [OFF]: 6:00 AM) (For / / ) 1 Select a zone. ( 22) 2 0 — 31: Select your preferred brightness level for display illumination and button illumination.
TROUBLESHOOTING ANDROID Remedy Symptom Remedy • Make sure KENWOOD MUSIC PLAY APP is installed on the Android device. ( 8) • Reconnect the Android device and select the appropriate control mode. • If this does not solve the problem, the connected Android device does not support [BROWSE MODE]. ( 27) “NO DEVICE” or “READING” keeps flashing. • Switch off the developer options on the Android device. • Reconnect the Android device.
TROUBLESHOOTING Remedy iHeartRadio station cannot be selected. If “Explicit Content” in [Account Settings] is checked in the web version of iHeartRADIO, custom stations become unavailable. “NOT CONNECTED” Link to the application is impossible. “CH LOCKED LOCK CODE?” The selected channel is locked. Enter the correct pass code to unlock. ( 14) “CHAN UNSUB” The selected channel is unsubscribed. Call 1-866-635-2349 in the U.S.A. or 1-877-438-9677 in Canada to subscribe.
TROUBLESHOOTING Bluetooth® Symptom Remedy “DEVICE FULL” The number of registered devices has reached its limit. Retry after deleting an unnecessary device. ( 19, DEVICE DELETE) “N/A VOICE TAG” Make sure the same voice as the registered voice tag is used. “NOT SUPPORT” The connected phone does not support Voice Recognition feature or phonebook transfer. “NO ENTRY” / “NO PAIR” There is no registered device connected/found via Bluetooth. “ERROR” Try the operation again.
REFERENCES Playable files • Playable audio file: MP3 (.mp3), WMA (.wma), AAC (.aac) • Playable disc media: CD-R/CD-RW/CD-ROM • Playable disc file format: ISO 9660 Level 1/2, Joliet, Long file name. • Playable USB device file system: FAT12, FAT16, FAT32 Even when audio files comply with the standards listed above, playback may be impossible depending on the types or conditions of media or device. The AAC (.m4a) file in a USB device or a CD encoded by iTunes cannot be played on this unit.
REFERENCES Change the display information Each time you press DISP, the display information changes. • If the information is unavailable or not recorded, “NO TEXT”, “NO INFO”, or other information (eg. station name, playing time) appears. Source name / / / STANDBY Source name (Date/Clock)*1 Source name TUNER Frequency (Date/Clock)*1 Frequency (For FM Radio Broadcast Data System stations only) Station name (Date/Clock)*1 Radio text (Date/Clock)*1 Radio text+ (R.
INSTALLATION / CONNECTION Warning • The unit can only be used with a 12 V DC power supply, negative ground. • Disconnect the battery’s negative terminal before wiring and mounting. • Do not connect Battery wire (yellow) and Ignition wire (red) to the car chassis or Ground wire (black) to prevent a short circuit. • Insulate unconnected wires with vinyl tape to prevent a short circuit. • Be sure to ground this unit to the car’s chassis again after installation.
Wiring connection (for / / / ) Part list for installation IMPORTANT : We recommend installing the unit with a commercially available custom wiring harness specific for your car and leave this job to professionals for your safety. Consult your car audio dealer. Rear/ front/ subwoofer output Rear/ subwoofer output Antenna terminal When connecting to an external amplifier, connect its ground wire to the car’s chassis to avoid damaging the unit.
Wiring connection (for ) IMPORTANT : We recommend installing the unit with a commercially available custom wiring harness specific for your car and leave this job to professionals for your safety. Consult your car audio dealer. MIC (Microphone input terminal) ( 15) To the remote control, KCA-RC55MR (optional accessory) When connecting to an external amplifier, connect its ground wire to the car’s chassis to avoid damaging the unit.
USB Standard USB 1.1, USB 2.0 Full Speed File System FAT12/ 16/ 32 Maximum Supply Current DC 5 V MP3 Decode Compliant with MPEG-1/2 Audio Layer-3 WMA Decode Compliant with Windows Media Audio 1.5 A Usable Sensitivity (S/N = 26 dB) 8.2 dBf (0.71 μV/75 Ω) Quieting Sensitivity (DIN S/N = 46 dB) 17.2 dBf (2.0 μV/75 Ω) AAC Decode AAC-LC “.
SPECIFICATIONS 50 W × 4 Full Bandwidth Power 22 W × 4 (at less than 1 % THD) Speaker Impedance 4Ω—8Ω Tone Action Band 1: Band 2: Band 3: Band 4: Band 5: Band 6: Band 7: Band 8: Band 9: Band 10: Band 11: Band 12: Band 13: Audio Maximum Output Power 62.5 Hz ±9 dB 100 Hz ±9 dB 160 Hz ±9 dB 250 Hz ±9 dB 400 Hz ±9 dB 630 Hz ±9 dB 1 kHz ±9 dB 1.6 kHz ±9 dB 2.5 kHz ±9 dB 4 kHz ±9 dB 6.
• “Made for iPod,” and “Made for iPhone” mean that an electronic accessory has been designed to connect specifically to iPod, or iPhone, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod or iPhone may affect wireless performance.
