Owner's Manual

6
Other settings
1
Press the volume knob to enter [FUNCTION] .
2 Turn the volume knob to select an item (see the following table),
then press the knob.
3 Repeat step 2 until the desired item is selected/activated or follow
the instructions stated on the selected item.
4 Press and hold to exit.
To return to the previous setting item, press
.
Default:
XX
TUNER SETTING
AUTO
MEMORY
YES :Automatically starts memorizing 6 stations with good reception.;
NO :Cancels.
• Selectable only if [NORMAL] is selected for [PRESET TYPE] . ( 5)
MONO SET
ON :Improves the FM reception, but the stereo effect may be lost.;
OFF :Cancels.
NEWS SET (For )
ON : The unit will temporarily switch to News Programme if available. ;
OFF :Cancels.
REGIONAL (For )
ON : Switches to another station only in the specific region using the “AF”
control.;
OFF :Cancels.
AF SET (For )
ON : Automatically searches for another station broadcasting the same
program in the same Radio Data System network with better reception
when the current reception is poor.;
OFF :Cancels.
TI ON :Allows the unit to temporarily switch to Traffic Information if available
(“TI” lights up).;
OFF :Cancels.
RADIO
Search for a station
1
Press repeatedly to select TUNER.
2 Press repeatedly (or press / on the remote
control) to select FM1/FM2/FM3/AM.
3 Press S/T (or press S/ on the remote control) to
search for a station.
• To change the searching method for S/T: Press
repeatedly.
AUTO1 : Automatically search for a station.
AUTO2 : Search for a preset station.
MANUAL : Manually search for a station.
• To store a station: Press and hold one of the number buttons (1to6).
• To select a stored station: Press one of the number buttons (1to6) (or
press one of the number buttons (1to6) on the remote control).
Direct Access Tuning (using the remote control)
1 Press DIRECT to enter Direct Access Tuning.
2 Press the number buttons to enter a frequency.
3 Press to search for a station.
• To cancel, press
or DIRECT.
• If no operation is done for 10seconds after step
2, Direct Access Tuning
is automatically canceled.
ENGLISH
JS_KWD_KDC_X301_KN_EN_4.indd 6 21/7/2016 11:40:37 AM