User Manual

6
ENGLISH
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
RADIO
• “ST” lights up when receiving an FM stereo broadcast with sufficient signal
strength.
• The unit switches to FM alarm automatically when receiving an alarm
signal from FM broadcast.
Search for a station
1
Press B SRC repeatedly to select RADIO.
2 Press BAND repeatedly (or press #FM+/
*
AM– on the remote control)
to select FM1/FM2/FM3/AM.
3 Press S / T (or press S / T (+) on the remote control) to
search for a station.
You can store up to 18 stations for FM and 6 stations for AM.
• To store a station: Press and hold one of the number buttons (1 to 6).
• To select a stored station: Press one of the number buttons (1 to 6) (or
press one of the number buttons (1 to 6) on the remote control).
Direct Access Tuning (using the remote control)
1 Press DIRECT to enter Direct Access Tuning.
2 Press the number buttons to enter a station frequency.
3 Press ENT IW to search for a station.
• To cancel, press
or DIRECT.
• If no operation is done for 10 seconds after step 2, Direct Access Tuning is
automatically canceled.
GETTING STARTED
Preparation:
Press B SRC repeatedly to enter STANDBY, then press the volume knob to
enter
[FUNCTION] .
1 Turn the volume knob to select an item, then press the knob.
[SYSTEM] [REM SETTING] [REMOTE ID SET]
Remote control ID list is displayed.
• [YES] indicates that this ID is already registered.
• [NO] indicates that this ID is available.
2 Turn the volume knob to select an available ID [REMID1] / [REMID2] /
[REMID3] , then press the knob.
“REGISTERING” appears on the display window.
To register, on the KENWOOD Marine Remote Control unit:
• Press ENTER to register as [REM ID1] .
• Press SRC to register as [REM ID2] .
• Press DISP to register as [REM ID3] .
Once the ID is registered, “COMPLETED” appears.
To delete the registered ID
1 Turn the volume knob to select an item, then press the knob.
[SYSTEM] [REM SETTING] [REMOTE ID DEL]
2 Turn the volume knob to select the ID to delete [ID1 DELETE] / [ID2 DELETE] /
[ID3 DELETE] , then press the knob.
3 Turn the volume knob to select [YES] to delete the selected ID, and
select [NO] to cancel.
• To exit, press and hold
.
• To return to the previous setting item, press
.
JS_KWD_KDC_X303_KN_EN_6th.indd 6JS_KWD_KDC_X303_KN_EN_6th.indd 6 4/6/2018 11:26:38 AM4/6/2018 11:26:38 AM