Owner's Manual
Table Of Contents
- Instruction Manual
- Software License Agreement
- Contents
- Before Use
- Basics
- Getting Started
- HD Radio™ Tuner (for KDC-X704/KDC-BT778HD)
- Radio
- CD/USB/iPod
- Pandora®
- Spotify
- SiriusXM® Radio
- AUX
- Using Other Applications
- Bluetooth®
- Amazon Alexa
- Audio Settings
- Display Settings
- Learning Steering Remote Control (for KDC-MP378BT)
- Installation/Connection
- References
- Troubleshooting
- Specifications
- Quick Start Guide
- Warranty
ENGLISH
9
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
HD Radio™ Tuner
(for / )
Display received emergency alert messages
The received emergency alert messages are stored in the Alert Message List,
and you can check them later.
While listening to the HD RADIO source...
1 Press to display the Alert Message List.
2 Turn the volume knob to select a message.
3 Press the volume knob to display the information related to the
message.
4 Press again to exit.
• “NO LIST” appears when the list is empty.
• This feature can store up to four messages in the list.
• To clear the message list, set
[FACTORY RESET]
to
[YES]
. (Page 7)
Other settings
1
Press the volume knob to enter
[FUNCTION]
.
2 Turn the volume knob to select an item (see the following table), then
press the knob.
3 Repeat step 2 until the desired item is selected/activated or follow the
instructions stated on the selected item.
4 Press and hold to exit.
To return to the previous setting item, press
.
Default: [XX]
[TUNER SETTING]
[SEEK MODE]
Selects the searching method for
S
/
T
buttons when pressed.
[AUTO1]: Automatically search for a station or channel. ;
[AUTO2]: Search for a preset station or channel. ;
[MANUAL]: Manually search for a station or channel.
[IF BAND]
[AUTO]: Increases the tuner selectivity to reduce interference noises from
adjacent FM stations. (Stereo effect may be lost.) ;
[WIDE]: Subjects to interference noises from adjacent FM stations, but
sound quality will not be degraded and the stereo effect will remain.
[AUTO MEMORY]
[YES]: Automatically starts memorizing 6 stations with good reception. ;
[NO]: Cancels.
• Selectable only if [NORMAL] is selected for [PRESET TYPE]. (Page 6)
[RECEIVE MODE]
Sets the receive mode of the HD Radio receiver.
[AUTO]: Automatically tunes to analog broadcast when there is no digital
broadcast. ;
[DIGITAL]: Tunes in to digital broadcast only. ;
[ANALOG]: Tunes in to analog broadcast only.
[CLOCK]
[TIME SYNC]
[ON]: Synchronizes the unit’s time to the Radio Broadcast Data System
station time. ; [OFF]: Cancels.
JS_KWD_KDC_X704_KN_EN.indd 9JS_KWD_KDC_X704_KN_EN.indd 9 5/3/2019 3:42:40 PM5/3/2019 3:42:40 PM