Owner's Manual
Table Of Contents
- Instruction Manual
- Reset
- Bluetooth PIN (0000)
- Clock Set
- Demo Mode
- Attaching / Removing Faceplate
- Initial Settings
- Table of Contents
- Parts & Controls
- Basic Operation
- Getting Started
- Radio Operation
- CD / USB / iPod / Android Operation
- AUX Input
- Pandora
- iHeartRadio
- SiriusXM
- Bluetooth
- Audio Settings
- Display Settings
- Troubleshooting
- Messages
- Specs
- Installation / Connection
- Warranty
ENGLISH
21
BLUETOOTH®
Internet radio via Bluetooth
Listen to Pandora
You can listen to Pandora on the Android device via
Bluetooth on this unit.
Preparation:
Select [
ON
] for [
PANDORA SRC
]. (
5
)
1 Open the Pandora application on your device.
2 Connect your Bluetooth audio player via
Bluetooth connection. (
15
)
3 Press repeatedly to select PANDORA.
The source switches and broadcast starts
automatically.
You can operate Pandora in the same way as
Pandora for iPod/iPhone. (
10
)
Listen to iHeartRadio
You can listen to iHeartRadio on the Android device
via Bluetooth on this unit.
Preparation:
Select [
ON
] for [
IHEART SRC
]. (
5
)
1 Open the iHeartAuto application on your smart
phone.
2 Connect your smart phone via Bluetooth
connection. (
15
)
3 Press repeatedly to select
IHEARTRADIO.
The source switches and broadcast starts
automatically.
You can operate iHeartRadio in the same way as
iHeartRadio for iPod/iPhone. (
11
)
AUDIO SETTINGS
While listening to any source...
1 Press the volume knob to enter [
FUNCTION
].
2 Turn the volume knob to select [
AUDIO CONTROL
], then press the knob.
3 Turn the volume knob to select an item (see the following table), then press the knob.
4 Repeat step 3 until the desired item is selected or activated.
5 Press and hold to exit.
(or using RC-406)
1 Press AUD to enter [
AUDIO CONTROL
].
2 Press J / K to select an item, then press .
To return to the previous setting item, press
.
Default:
XX
SUB-W LEVEL –50
to
+10
(
0
): Adjusts the subwoofer output level.
MANUAL EQ
BAND1 LEVEL LEVEL
–9
to
+9
(
0
):(Refer to
BAND2 LEVEL
below.)
BASS EXTEND ON
:Turns on the extended bass.;
OFF
:Cancels.
BAND2 LEVEL
to
BAND13 LEVEL
–9
to
+9
(
0
): The sound elements (frequency level, tone level, Q factor) are preset into each
selection (
BAND1 LEVEL
to
BAND13 LEVEL
).
Adjusts the level to memorize for each source. (Before making an adjustment, select the source you
want to adjust.)
Q FACTOR 1.35
/
1.50
/
2.00
:Adjust the quality factor.
PRESET EQ NATURAL
/
ROCK
/
POPS
/
EASY
/
TOP40
/
JAZZ
/
POWERFUL
/
USER
: Selects a preset equalizer
suitable to the music genre. (Select [
USER
] to use the settings made in [
MANUAL EQ
].)
BASS BOOST LEVEL1
/
LEVEL2
/
LEVEL3
/
LEVEL4
/
LEVEL5
:Selects your preferred bass boost level.;
OFF
:Cancels.
LOUDNESS LEVEL1
/
LEVEL2
:Selects your preferred low and high frequencies boost to produce a well-balanced
sound at a low volume level.;
OFF
:Cancels.
SUBWOOFER SET ON
:Turns on the subwoofer output.;
OFF
:Cancels.
FADER R15
to
F15
(
0
):Adjusts the rear and front speaker output balance.
BALANCE L15
to
R15
(
0
):Adjusts the left and right speaker output balance.
JS_KWD_KDC_X500_KW_EN_00_8.indd 21 4/9/2015 2:18:28 PM