Owner's Manual
Table Of Contents
- Instruction Manual
- Reset
- Bluetooth PIN (0000)
- Clock Set
- Demo Mode
- Initial Settings
- Attaching / Removing Faceplate
- Table of Contents
- Parts & Controls
- Basic Operation
- Getting Started
- Radio Operation
- CD / USB / iPod / Android Operation
- AUX Input
- Pandora
- iHeartRadio
- SiriusXM
- Bluetooth
- Audio Settings
- Display Settings
- Troubleshooting
- Messages
- Specs
- Installation / Connection
- Warranty
26
AUDIO SETTINGS
Digital Time Alignment settings
Digital Time Alignment sets the delay time of the speaker output to create a
more suitable environment for your vehicle.
• For more information,
Determining the value for [DISTANCE] and [GAIN] of
[DTA SETTINGS]
.
( 27)
DTA SETTINGS
POSITION
Selects your listening position (reference point).
ALL
:Not compensating;
FRONT RIGHT:
Front right seat;
FRONT LEFT
:Front left seat;
FRONT ALL
:Front seat
DISTANCE 0FT
to
20.01FT
:Fine adjust the distance to compensate. (Before making an
adjustment, select the speaker you want to adjust.)
GAIN –8DB
to
0DB
:Fine adjust the output volume of the selected speaker.
(Before making an adjustment, select the speaker you want to adjust.)
DTA RESET YES
:Resets the settings (
[DISTANCE]
and
[GAIN]
) of the selected
[POSITION]
to default.;
NO
:Cancels.
CAR SETTINGS
Identify your car type and rear speaker location in order to make the
adjustment for
[DTA SETTINGS]
.
CAR TYPE COMPACT
/
FULL SIZE CAR
/
WAGON
/
MINIVAN
/
SUV
/
MINIVAN(LONG)
:Selects the type of vehicle.;
OFF:
Not compensating.
REAR-SP
LOCATION
Selects the location of the rear speakers in your vehicle to calculate the
furthest distance from the listening position selected (reference point).
•
DOOR
/
REAR DECK
:Selectable only when
[CAR TYPE]
is selected as
[OFF]
,
[COMPACT]
,
[FULL SIZE CAR]
,
[WAGON]
or
[SUV]
.
•
2ND ROW
/
3RD ROW
:Selectable only when
[CAR TYPE]
is selected as
[MINIVAN]
or
[MINIVAN(LONG)]
.
•
Before making an adjustment for
[DISTANCE]
and
[GAIN]
of
[DTA SETTINGS]
, select the speaker
you want to adjust:
FRONT LEFT
/
FRONT RIGHT
/
REAR LEFT
/
REAR RIGHT
/
SUBWOOFER:
You can only select
[REAR LEFT], [REAR RIGHT]
and
[SUBWOOFER]
if a setting other than
[NONE]
is selected for
[REAR]
and
[SUBWOOFER]
of
[SPEAKER SIZE]
.
( 25)
•
[REAR-SP LOCATION]
of
[CAR SETTINGS]
is selectable only if a setting other than
[NONE]
is
selected for
[REAR]
of
[SPEAKER SIZE]
.
( 25)
REAR HPF REAR-HPF FRQ
(Refer
FRONT HPF
settings,
25
)
REAR-HPF SLOPE
REAR-HPF GAIN
SUBWOOFER
LPF
SW LPF FRQ
30HZ
/
40HZ
/
50HZ
/
60HZ
/
70HZ
/
80HZ
/
90HZ
/
100HZ
/
120HZ
/
150HZ
/
180HZ
/
220HZ
/
250HZ
: Adjusts the crossover frequency for the
subwoofer (low pass filter).;
THROUGH
: All
signals are sent to the subwoofer.
SW LPF SLOPE –6DB
/
–12DB
/
–18DB
/
–24DB: Adjusts the
crossover slope.
(Selectable only if a setting other than
[THROUGH]
is selected for
[SW LPF FRQ]
.)
SW LPF PHASE REVERSE
(180°)/
NORMAL
(0°): Selects
the phase of the subwoofer output to be in
line with the speaker output for optimum
performance.
SW LPF GAIN –8
to
0
:Adjusts the output volume of the
subwoofer.
DTA SETTINGS
For settings,
Digital Time Alignment settings
.
CAR SETTINGS
•
The following item is selectable only if
[SUBWOOFER SET]
is set to
[ON]
( 25)
:
–
[SUB-W LEVEL]
–
[SUBWOOFER]
of
[SPEAKER SIZE]
–
[SUBWOOFER LPF]
of
[X’OVER]
–
[SUBWOOFER]
of
[DISTANCE]
and
[GAIN]
in
[DTA SETTINGS]
•
The following item is selectable only if a setting other than
[NONE]
is selected for
[TWEETER]
,
[REAR]
and
[SUBWOOFER]
of
[SPEAKER SIZE] ( 25)
:
–
[TWEETER]
,
[REAR HPF]
,
[SUBWOOFER LPF]
of
[X’OVER]
ENGLISH
JS_KWD_KDC_X701_KN_EN_4.indd 26 11/14/2016 8:41:42 AM